www.timex.com
W-140-US 893-095000

THANK YOU FOR PURCHASING YOUR TIMEX WATCH.
EXTENDED WARRANTY
Available in U.S. only. Extend your warranty for an additional 4 years from the date of purchase for $5. You can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during normal business hours. Payment must be made within 30 days of purchase. Name, address, telephone number, purchase date, and 5- digit model number required. You can also mail a check for $5 to Timex Extended Warranty, P.O. Box 1676, Dept. EF, Little Rock, AR 72203.  Please read the instructions carefully to understand how to operate your Timex watch. Your model may not have all of the features described in this booklet.

FEATURES

• Automatic synchronization to broadcast UTC signals
• Auto calendar 2000-2099
• Two time zones
• Day and daily alarms
• 100-hour chronograph
• Low battery indicator

BASIC OPERATIONS

A. Press MODE to cycle through DAILY ALARM, DAY ALARM, TIME ZONE, and CHRONOGRAPH  modes.
B. Press INDIGLO to illuminate the watch face.
C. When setting, press and hold START/STOP or SPLIT/RESET to change digits rapidly.

TIME SYNCHRONIZATION

Coordinated Universal Time (UTC) is the basis for the worldwide system of civil time. It is determined using highly precise atomic clocks at time laboratories around the world that are accurate to a billionth of a second per day. UTC time signals are broadcast via low-frequency signals. Your radio controlled Timex ®
watch synchronizes its time to the broadcast time signal. PLEASE NOTE: This product only works in North America. A. In TIME mode, press and hold SPLIT/RESET. The watch will attempt to synchronize time with the nearest time broadcast and the tower symbol will flash in the display. This may take up to two minutes.
B. Watch automatically attempts synchronization at 1:00 am daily and 4:00 am Sunday local time.
C. Tower icon ( ) appears in the display if synchronization has been successful within 24 hours.
TIPS:
WARNING: Depending on your location, the watch may be unable to pick up the radio signal from Colorado. Synchronization may also not be successful if your watch is near a source of interference (e.g., computer monitor) or you are in a building with a metal roof. Cloudy or rainy weather conditions may interfere with radio signal transmission. If synchronization is unsuccessful, try the following:

• Rotate watch 90 degrees.
• Move to a wall or window facing toward Fort Collins, CO.
• Move at least 2 meters away from any computer monitors.
• Move outside. If it works outdoors but not indoors, you may have a local interference problem in your building.
  If your watch is off by one or more hours: make sure you have properly selected your time zone (see below). If you are in an area that does not observe Daylight Savings Time (DST), be sure DST is disabled on your watch.
  If your watch is off by a few minutes or seconds: make sure that your watch is currently receiving the signal (tower icon appears in the display).
  If your watch did not adjust the time for DST, make sure that your watch is currently receiving the signal (the tower icon appears in the display).
  QUICKSTART FEATURE: At any time, you can press and hold SPLIT/RESET to force the watch to attempt synchronization.
  For further information on synchronization/interference issues, visit the U.S. government website: http://tf.nist.gov/stations/wwvb.htm.

TIME AND DATE

A. To view UTC time, press ADJUST. Universal Time appears in the upper part of the display. Press again to change to time and date display.
B. To set watch, press, and hold ADJUST. TIME digits will flash.
C. Press START/SPLIT or SPLIT/RESET to set time. Go through 12 hours for AM or PM.
D. Press MODE to select a date. Day changes automatically.
E. Press START/SPLIT or SPLIT/RESET to set a date. Go through 12 months to set year.
F. Press ADJUST when done.

TIME ZONE

A. Press MODE until ZO appears.
B. Press and hold ADJUST. TIME ZONE digits will flash.
C. Press START/STOP or SPLIT/RESET to select a time zone. P, M, C, or E will appear at the top of the display to indicate the time zone depending on the hour’s value selected (see chart below).
D. If desired, press MODE to select the DST setting and press START/STOP or SPLIT/RESET to turn on/off.
E. Press ADJUST when done.

DAILY ALARM

A. Press MODE until AL appears.
B. Press and hold AJDUST. TIME digits will flash.
C. Press START/SPLIT or SPLIT/RESET to set alarm time. Go through 12 hours for AM or PM.
Press ADJUST when done.
D. Press and hold ALARM for two seconds in any mode to turn alarmed on or off.
E. When the alarm time is reached, the watch will beep for 30 seconds, or until any button is pushed.
The alarm repeats every 24 hours until deactivated.

DAY ALARM

A. Press MODE until DA appears.
B. Press and hold AJDUST. TIME digits will flash.
C. Press START/SPLIT or SPLIT/RESET to set the alarm date.
D. Press ADJUST when done.
E. At 12:00 AM on alarm date, TODAY will flash in the display until the following day.

CHRONOGRAPH

A. Press MODE until SP appears.
B. Press SPLIT/RESET to select Split or Lap display.
C. Press START/STOP to start.
D. Press SPLIT/RESET to record lap or split time. CHRONO continues to run.
E. Press SPLIT/RESET to display running time.
F. Press START/STOP to pause. Press again to resume.
G. Press START/STOP and then SPLIT/RESET to reset CHRONO.

INDIGLO® NIGHT-LIGHT 

Press INDIGLO to illuminate the watch face. Patented (U.S. pat. 4,527,096 and 4,775,964) electroluminescent technology used in the INDIGLO® night-light illuminates the entire watch face at night and in low light conditions.
INDIGLO® night-light shuts off automatically after 5 seconds.

WATER RESISTANCE

If your watch is water-resistant, meter marking or ( ) is indicated.

*pounds per square inch absolute

WARNING: TO MAINTAIN WATER RESISTANCE, DO NOT PRESS ANY BUTTONS OR PULL OUT THE CROWN UNDERWATER UNLESS YOUR WATCH IS INDICATED AS 200 METER WATER-RESISTANT.

1. Watch is water-resistant only as long as crystal, crown, and case remain intact.
2. Watch is not a diver watch and should not be used for diving.
3. Rinse watch with fresh water after exposure to saltwater.

BATTERY

If the battery is low, symbol ( ) will flash in the display. Timex strongly recommends that a retailer or jeweler replace the battery. If applicable, push the reset button when replacing the battery.
The battery type is indicated on case back. Battery life estimates are based on certain assumptions regarding usage; battery life may vary depending on actual usage.
DO NOT DISPOSE OF BATTERY IN FIRE. DO NOT RECHARGE. KEEP LOOSE BATTERIES AWAY FROM CHILDREN.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential environment. This equipment generates, uses, and can radiate radio frequency energy and, if not used in accordance with the instruction manual may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by reorienting or relocating the receiving antenna, or by increasing the separation between the equipment and receiver.

CAUTION: Any changes or modifications not expressly approved by Timex Corporation could void the user’s authority to operate this equipment.

TIMEX INTERNATIONAL WARRANTY
(U.S. – LIMITED WARRANTY – PLEASE SEE FRONT OF INSTRUCTION BOOKLET
FOR TERMS OF EXTENDED WARRANTY OFFER)

Your TIMEX watch is warranted against manufacturing defects by Timex Corporation for a period of ONE YEAR from the original purchase date. Timex and its worldwide affiliates will honor this International Warranty.
Please note that Timex may, at its option, repair your watch by installing new or thoroughly reconditioned and inspected components or replace it with an identical or similar model. IMPORTANT — PLEASE NOTE THAT THIS WARRANTY DOES NOT COVER DEFECTS OR DAMAGES TO YOUR WATCH:

1.  after the warranty period expires;
2.  if the watch was not originally purchased from an authorized Timex retailer;
3.  from repair services not performed by Timex;
4.  from accidents, tampering or abuse; and
5. lens or crystal, strap or band, watch case, attachments or battery. Timex may charge you for replacing any of these parts.

THIS WARRANTY AND THE REMEDIES CONTAINED HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
TIMEX IS NOT LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES. Some countries and states do not allow limitations on implied warranties and do not allow exclusions or limitations on damages, so these limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from country to country and state to state.
To obtain warranty service, please return your watch to Timex, one of its affiliates or the Timex retailer where the watch was purchased, together with a completed original Watch Repair Coupon or, in the U.S. and Canada only, the completed original Watch Repair Coupon or a written statement identifying your name, address, telephone number and date, and place of purchase. Please include the following with your watch to cover postage and handling (this is not a repair
charge):
a US$ 7.00 check or money order in the U.S.; a CAN$6.00 cheque or money order in Canada; and a UK£2.50 cheque or money order in the U.K. In other countries, Timex will charge you for postage and handling. NEVER INCLUDE A SPECIAL WATCHBAND OR ANY OTHER ARTICLE OF PERSONAL VALUE IN YOUR SHIPMENT.
For the U.S., please call 1-800-448-4639 for additional warranty information. For Canada, call 1-800-263-0981. For Brazil, call 0800-168787. For Mexico, call 01-800-01-060-00. For Central America, the Caribbean, Bermuda, and the Bahamas, call (501) 370-5775 (U.S.). For Asia, call 852-2815-0091. For the U.K., call 44 208 687 9620. For Portugal, call 351 212 946 017. For France, call 33 3 81 63 42 00. For Germany, call +43 662 88 92130. For the Middle East and Africa, call 971-4-310850. For other areas, please contact your local Timex retailer or Timex distributor for warranty information. In the U.S. and in certain other locations, participating Timex retailers can provide you with a postage-paid, pre-addressed Watch Repair, Mailer, for your convenience in obtaining factory service.

TIMEX Atomic Digital Clock User Guide

NOTE: A clear protective film is applied to the LCD at the factory that must be removed prior to using this product. Locate the clear tab and simply peel to remove.

USER GUIDE

Thank you for purchasing this quality TIMEX ® brand product. Please read these instructions COMPLETELY to fully understand the features and functions of this clock, and to enjoy its benefts. Make sure to keep this guide handy for future reference.

To receive product information, register your product online. It’s quick & easy! Log on to http://www.chaneyinstrument.com/ProductReg.aspx

Package Contents:

(1) Atomic Digital Clock
(1) Wireless Outdoor Temperature Sensor
(1) User Guide

What You’ll Need:
(8) AA Batteries

WHAT IS AN ATOMIC CLOCK?

An Atomic clock is a timepiece that maintains accuracy up to one second per million years using the most precise method of time synchronization, radio signals. In North America, the National Institute of Standards and Technologies (NIST) operates an Atomic clock in Fort Collins, Colorado, that transmits the time codes via the radio station WWVB.

This quality TIMEX ® clock includes a built-in receiver that picks up the Atomic radio signal from WWVB. To maintain the best possible reception, place the unit so that the backside faces in the general direction of Colorado. What’s more, the IntelliTime ® technology built into this clock makes for hassle-free automatic setting and resetting for daylight saving time.

PLEASE NOTE: Due to solar radiation in the atmosphere, the atomic clock signal is weaker during the day. Most synchronization will happen at night when there is less interference.

BASIC SETUP

1. Battery Installation – BEGIN WITH THE OUTDOOR WIRELESS SENSOR
2. Initial Setup – once the batteries are installed, the clock will power up. The display will appear as follows:
   The clock will initially set itself to the correct time and date, defaulting to EST (Eastern Standard Time). It will also begin displaying the temperatures. The clock will begin searching for the Atomic signal.
   Note: The clock will adjust for daylight saving time, even if it is unable to receive the WWVB signal
   After the clock acquires the Atomic signal (this may take 24-48 hours) the time, date and daylight saving time changes will update automatically, giving you maintenance-free operation and accuracy to the split second
3. Choosing Your Time Zone
   1. Press and HOLD the SET button until you see the selection of seven time zones flashing on the LCD screen then RELEASE.
   2. Press the UP ARROW repeatedly until you reach your time zone, then press SET

In the event you wish to manually change the clock settings, please use the instructions on page 5.

Battery Choice & Temperature Range:

extended periods of extreme cold temperatures (below -4°f/ -20°c) can cause alkaline batteries to function improperly. this may cause the outdoor wireless sensor to stop transmitting temperature readings. we recommend using lithium batteries in extreme low temperature conditions to ensure continued operation of the outdoor sensor.

For the digital atomic clock we recommend only alkaline batteries.

Placement of the Clock:

Place the clock in an area free of dirt and dust. To help ensure an accurate indoor temperature measurement, be sure to place the main unit out of direct sunlight, and away from any heat sources or vents in your home.

This clock may be hung on a wall using the integrated wall-hanging hole, or you may place the unit on a tabletop or other fat surface using the swing-out stands.

Placement of the Outdoor Sensor:

The wireless temperature sensor MUST BE PLACED OUTDOORS to capture and relay the outdoor temperature to the clock display unit. You may place your wireless temperature sensor outside up to 100 feet (30m) from the clock, as shown.

The sensor is water resistant and is designed for outdoor use. However, to extend the life of the product, place it in an area protected from harsh weather elements. To ensure an accurate temperature reading, be sure the sensor is out of direct sunlight and away from any heat sources.

Future Forecast Icon

The future forecast feature automatically gives you the predicted weather forecast icon for the next 12 to 24 hours based on an advanced algorithm that analyzes barometric pressure changes and temperature. This weather forecaster will provide the most accurate forecast that a single stations instrument can provide.

Weather Trend Icon

The “Weather Trend” directional arrow icon will indicate one of three barometric pressure trend directions. This will give an additional indicatin of future weather conditions

Wireless Signal Reception Icons

The main unit has a signal reception icon near the outdoor temperature display area. If there are a low number of “bars” present, you may experience no temperature display (“–”) or inaccuracy. In either case, you may need to relocate one of both of the units. If most or all 4 of the bars are present, wireless reception is good and no action is required.

SETTING THE CLOCK MANUALLY

TROUBLESHOOTING

Product Specifications

• Indoor Temp. Range = 32°F to 140°F (0°C to 60°C)
  *NOTE: indoor unit should not be placed in conditions under 32˚F
• Outdoor Temp. Range = -40°F to 158°F (-40°C to 70°C)
• Atomic Clock Frequency = WWVB 60Khz 433Mhz – Radio Signal Synchronizes daily in optimal conditions 100′ (30m) Radio Frequency Transmission Range
• Power Requirements = (8) “AA” Alkaline Batteries

BATTERY SAFETY:
Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals. PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

Please DO NOT return product to the retail store. For technical assistance and product return information, please call customer care @ 877-221-1252 Monday – Friday — 8:00 a.m. – 4:30 p.m. CST

www.chaneyinstrument.com

Timex ® is a registered trademark of Timex Corporation in the U.S. and other countries.
Manufactured and serviced by
Chaney Instrument Co.
Lake Geneva, WI 53147
www.chaneyinstrument.com

© 2010 Chaney Instrument Co.
INST – 75329T 070110

This device complies with part 15 of the FCC rules and RSS-210 of IC rules subject to the following two conditions:
1- This device may NOT cause harmful interference, and
2- This device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, There is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.

Patent numbers: 5.978.738: 6.076.044: 6.597.990

TIMEX Atomic Wall Clock Instructions

NOTE: A clear protective film is applied to the LCD at the factory that must be removed prior to using this product. Locate the clear tab and simply peel to remove.

Package Contents:

1. Atomic Wall Clock
2. User Guide

What You’ll Need:
(2) AA Batteries

Thank you for purchasing this quality TIMEX® brand product. Please read these instruc­tions COMPLETELY to fully understand the features and functions of this clock, and to enjoy its benefits. Make sure to keep this guide handy for future reference.

To receive product information, register your product online. It’s quick & easy! Log on to http://www.chaneyinstrument.com/ProductReg.aspx

WHAT IS AN ATOMIC CLOCK?

An Atomic clock is a timepiece that maintains accuracy up to one second per million years using the most precise method of time synchronization, radio signals.

In North America, the National Institute of Standards and Technologies (NIST) operates an Atomic clock in Fort Collins, Colorado, that transmits the time codes via the radio station WWVB.

This quality TIMEX clock includes a built-in receiver that picks up this Atomic radio signal from WWVB. To maintain the best possible reception, place the unit so that the backside faces in the general direction of Colorado.

PLEASE NOTE: Due to solar radiation in the atmosphere, the atomic clock signal is weaker during the day. Most synchronization will happen at night when there is less interference.
This clock is designed for wall OR tabletop placement.

We have included a wall-hanging hole as well as an integrated swing-out stand.

SETTING THE CLOCK MANUALLY

BASIC SETUP

1. Battery Installation – remove the battery compartment cover on the back of the unit and install 2 FRESH “AA” batteries as shown here.                 
2. Initial Setup – once the batteries are installed, the clock will power up. The display will appear as follows:

The clock will begin searching for the Atomic signal If the signal is AVAILABLE– the clock will receive the local time in 3-5 minutes. The full strength signal indicator bars will appear on the display.

If the signal is NOT readily available – you can manually set the clock and calendar (SEE MANUAL SETTING INSTRUCTIONS).

After the clock acquires the Atomic clock radio signal (this may take 24-48 hours) the time, date and daylight saving time changes will update automatically, giving you maintenance-free operation and perfect time precision.

3. Choose Your Time Zone – You must set your time zone so the clock will display accurate time once the atomic signal is received:

a. Select your time zone by repeatedly pressing the (▲) ARROW until you see your time zone displayed on the LCD screen.

In the event you wish to manually change the clock settings, please use the instructions on the following page

TROUBLESHOOTING

Product Specifications

Indoor Temp. Range= 32° F to 122° F
Power Requirements = (2) “AA” Alkaline Batteries

BATTERY SAFETY:

Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be used for an extended period of time. Follow the polarity ( +/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

Please DO NOT return product to the retail store. For technical assistance and
product return information, please call technical support@877-221-1252
Monday – Friday — 8:00 a.m. – 4:30 p.m. CST

www.chaneyinstrument.com

LIMITED ONE YEAR WARRANTY – Chaney Instrument Company warrants that all products it manufactures to be of good material and workmanship and to be free of defects if properly installed and operated for a period of one year from date of purchase. REMEDY FOR BREACH OF THIS WARRANTY IS EXPRESSLY LIMITED TO REPAIR OR REPLACEMENT OF DEFECTIVE ITEMS. Any product which, under normal use and service, is proven to breach the warranty contained herein within ONE YEAR from date of sale will, upon examination by Chaney, and at its sole option, be repaired or replaced by Chaney. In all cases, transportation costs and charges for returned goods shall be paid for by the purchaser. Chaney hereby disclaims all responsibility for such transportation costs and charges. This warranty will not be breached, and Chaney will give no credit for products it manufactures which shall have received normal wear and tear, been damaged, tampered, abused, improperly installed, damaged in shipping, or repaired or altered by others than authorized representatives of Chaney.

Timex® is a registered trademark of Timex Corporation in the U.S. and other countries
Manufactured and serviced by
Chaney Instrument Co.
Lake Geneva, WI 53147
www.chaneyinstrument.com

MARATHON® DIGITAL

06M-096000 8.21.20
Register your product at https://www.timex.com/product-registration.html

EXTENDED WARRANTY

Available in U.S. only. Extend your warranty for an additional 4 years from the date of purchase for $5… You can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during normal business hours. Payment must be made within 30 days of purchase. Name, address, telephone number, purchase date, and 5-digit model number required. You can also mail a check for $5 to Timex Extended Warranty, P.O.Box 1676, Dept. EF, Little Rock, AR 72203. Please read the instructions carefully to understand how to operate your Timex® watch. Your model may not have all of the features described in this booklet.

FEATURES AND BASIC OPERATION

1. Date with MM-DD (month/day) format
2. Daily Alarm
3. Hourly Chime
4. 24-Hour Stopwatch with Split time
5. INDIGLO® night-light
   

TIME
To set time and date

1. Press MODE until you get to the screen where the Seconds can be seen flashing.
2. Press ST/STP/ALM to set Seconds to zero adding one minute if seconds are “30” or greater.
3. Press RESET/NEXT to set Hours, as indicated by its flashing. Press ST/STP/ALM to advance the Hours setting. Press and hold to increment quickly.
4. Press RESET/NEXT to set Minutes, as indicated by its flashing. Press ST/STP/ALM to advance the Minutes setting. Press and hold to increment quickly.
5. Press RESET/NEXT to set the Month number, as indicated by its flashing. Press ST/STP/ALM to advance the Month setting… Press and hold to increment quickly.
6. Press RESET/NEXT to set the Day, as indicated by its flashing. Press ST/STP/ALM to advance the Day setting. Press and hold to increment quickly.
7. Press RESET/NEXT to set Day of the Week, as indicated by its flashing. Press ST/STP/ALM to advance the Day of the Week set. Press and hold to increment quickly.
8. Press MODE to exit Time Set.
9. To toggle between 12-Hour and 24-Hour time formats, press ST/STP/ALM.

STOPWATCH
Use this function for timing events.

1. Press MODE until “ST” appears.
2.  Press ST/STP/ALM to start timing.
3. With the stopwatch running, press RESET/NEXT to record a Split time. The stopwatch will continue timing in the background.
4. Press RESET/NEXT to release the display and show the current running stopwatch time.
5. Press RESET/NEXT to record another Split time.
6. Press ST/STP/ALM to pause the timing.
7. Either press ST/STP/ALM to resume timing, or press RESET/NEXT to reset the Stopwatch to zero.
   Note: If the Stopwatch was paused when the display was showing a Split time, the first press of RESET/NEXT will show the final recorded time, and the second press will reset the Stopwatch to zero.

ALARM

To turn on/off or to set a Daily alarm with a one-time snooze feature. To turn on/off an hourly chime.

1. Press MODE until “AL” appears.
2. Press ST/STP/ALM repeatedly to turn on/off the Alarm () or the Hourly Chime ( ) or both.
3. To Set the Alarm, press RESET/NEXT. The Hour digit flashes and the Alarm ON () lights.
4. Press ST/STP/ALM to advance the Hours setting… Press and hold to increment quickly.
   Note: The Hours will be presented in the same format (12- or 24-hour time) as the time setting.
5. Press RESET/NEXT to set the Minutes as indicated by its flashing. Press ST/STP/ALM to advance the Minutes setting. Press and hold to increment quickly.
6. Press RESET/NEXT to exit the Alarm Setting mode.
7. When the alarm sounds:
   • Press RESET/NEXT to stop the alert, and the alarm will sound at the same time on the next day…

INDIGLO® NIGHT-LIGHT
Press the INDIGLO ® button to illuminate the watch display for 2-3 seconds. Electroluminescent technology used in the INDIGLO® night-light illuminates the watch face at night and in low light conditions.

WATER AND SHOCK RESISTANCE
If your watch is water-resistant, meter marking or () is indicated

*pounds per square inch absolute

WARNING: TO MAINTAIN WATER RESISTANCE, DO NOT PRESS ANY BUTTONS  UNDERWATER.

1. Watch is water-resistant only as long as a lens, push buttons and case remain intact.
2. Watch is not a diver watch and should not be used for diving.
3. Rinse watch with fresh water after exposure to saltwater.
4. Shock resistance will be indicated on the watch face or caseback. Watches are designed to pass the ISO test for shock resistance. However, care should be taken to avoid damaging the crystal/lens.

BATTERY
Timex strongly recommends that a retailer or jeweler replace the battery.
If applicable, push the reset button when replacing the battery. The battery type is indicated on the case back. Battery life estimates are based on certain assumptions regarding usage; battery life may vary depending on actual usage.

DO NOT DISPOSE OF BATTERY IN FIRE. DO NOT RECHARGE. KEEP LOOSE BATTERIES AWAY FROM CHILDREN.

TIMEX INTERNATIONAL WARRANTY
http://www.timex.com/productWarranty.html
©2020 Timex Group USA, Inc.TIMEX, INDIGLO, and MARATHON are registered trademarks of Timex Group B.V.and its subsidiaries.

03J-095000 Watch

03J-095000 1.9.19 Register your product at https://www.timex.com/product-registration.html

EXTENDED WARRANTY

Available in U.S. only. Extend your warranty for an additional 4 years from date of purchase for $5. You can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during normal business hours. Payment must be made within 30 days of purchase. Name, address, telephone number, purchase date, and 5-digit model number required. You can also mail a check for $5 to: Timex Extended Warranty, P.O. Box 1676, Dept. EF, Little Rock, AR 72203. Please read instructions carefully to understand how to operate your Timex® watch.

FEATURES AND BASIC OPERATION

1. Date with MM-DD format (month/day)
2. 24-Hour Stopwatch with Split time
3. Daily Alarms and Hourly Chime
4. 24-Hour Countdown Timer
5. Dual Time (2nd Time Zone)
6. INDIGLO® night-light

Button functions shown with setting functions in parentheses

TIME

To set time and date

1. From Time of Day mode, press and hold RESET. The watch beeps and Seconds can be seen flashing.
2. Press ST/STP to set Seconds to zero.
3. Press MODE to set Hours, as indicated by its flashing. Press ST/STP to advance the Hours setting. Press and hold to increment quickly.
4. Press MODE to set Minutes, as indicated by its flashing. Press ST/STP to advance the Minutes setting. Press and hold to increment quickly.
5. Press MODE to set the Year number, as indicated by its flashing. Press ST/STP to advance the Year setting. Press and hold to increment quickly.
6. Press MODE to set the Month number, as indicated by its flashing. Press ST/STP to advance the Month setting. Press and hold to increment quickly.
7. Press MODE to set the Date, as indicated by its flashing. Press ST/STP to advance the Date setting. Press and hold to increment quickly. 8. Press RESET to exit Time Set. 9. To toggle between 12-Hour (A/P indicator) and 24-Hour time format, press ST/STP.

STOPWATCH

Use this function for timing events.

1. Press MODE until “SP” appears.
2. Press ST/STP to start timing.
3. With the stopwatch running, press RESET to record the Split time. The display will show the Split time, but the stopwatch will continue timing in the background.
4. Press RESET to release the display and show the current running stopwatch time.
5. Press RESET to record another Split time.
6. Press ST/STP to pause the timing.
7. Either press ST/STP to resume timing, or press RESET to reset the Stopwatch to zero. Note: If the Stopwatch was paused when the display was showing a Split time, the press of ST/STP will pause the stopwatch and show the total elapsed time.

LAP 1 = 7.11
LAP 2 = 7.50
LAP 3 = 7.08
LAP 4 = 7.30
SPLIT 1 = 7.11
SPLIT 2 = 15.01
SPLIT 3 = 22.09
SPLIT 4 = 29.39

COUNTDOWN TIMER

Use this function for timing events or tasks that have a defined end.

1. Press MODE until “TR” appears.
2. To Set the Timer, press RESET. The Hour digit flashes.
3. Press ST/STP to advance the Hours setting. Press and hold to increment quickly.
4. Press MODE to set the Minutes as indicated by its flashing. Press ST/STP to advance the Minutes setting. Press and hold to increment quickly.
5. Press MODE to set the Seconds as indicated by its flashing. Press ST/STP to advance the Seconds setting. Press and hold to increment quickly.
6. Press RESET to exit Countdown Timer Set.
7. To use the Countdown Timer, press ST/STP to start timing.
8. With the timer running, press ST/STP to pause the timer.
9. With the timer paused, press ST/STP to re-start it or press RESET to reset the timer to its originally set duration.
10. When the alert sounds, press ANY button to silence it, or it will stop automatically in about 10 seconds. Note: When you press RESET at the end of the countdown or to reset a paused timer, the watch goes into Timer Set mode. Press RESET to exit that mode and to return the timer to its originally set countdown.

ALARM

To turn on/off or to set one of the 5 Daily alarms, or to turn on/off an hourly chime.

1. Press MODE until “AL” appears.
   Note: The alarm settings are tied to the primary time zone (T1).
2. Press ST/STP to turn on/off the Hourly Chime ( )
3. Press INDIGLO® to select one of the 5 alarms.
4. Press ST/STP to turn on/off each Alarm ( ).
5. To Set the Alarm, press RESET. The Hour digit flashes and the Alarm ON
   ( ) lights.
6. Press ST/STP to advance the Hours setting. Press and hold to increment quickly.
   Note: The Hours will be presented in the same format (12- or 24-hour time) as the time setting.
7. Press MODE to set the Minutes as indicated by its flashing. Press ST/STP to advance the Minutes setting. Press and hold to increment quickly.
8. Press RESET to exit the Alarm Set.
9. When the alarm sounds, press ANY button to silence the alert, or it will stop automatically in about 60 seconds.

DUAL TIME
To set the time for a second time zone

1. Press MODE until “T2” appears.
2. Press RESET. The Hours can be seen flashing. Press ST/STP to advance the Hours setting. Press and hold to increment quickly.
3. Press MODE to set Minutes, as indicated by its flashing. Press ST/STP to toggle between the same Minutes setting as Time Mode (T1) or 30 Minutes difference.
4. Press RESET to exit Dual Time Set. Note: The Hours will be presented in the same format (12- or 24-hour time) as the time setting.

INDIGLO® NIGHT-LIGHT
Press INDIGLO® button to illuminate watch display for 2-3 seconds. Electroluminescent technology used in the INDIGLO® night-light illuminates watch face at night and in low light conditions.

WATER AND SHOCK RESISTANCE
If your watch is water-resistant, meter marking or (O) is indicated

*pounds per square inch absolute

WARNING: TO MAINTAIN WATER-RESISTANCE, DO NOT PRESS ANY BUTTONS UNDER WATER.

1. Watch is water-resistant only as long as lens, push buttons and case remain intact.
2. Watch is not a diver watch and should not be used for diving.
3. Rinse watch with fresh water after exposure to salt water.
4. Shock-resistance will be indicated on watch face or cashback. Watches are designed to pass ISO test for shock-resistance. However, care should be taken to avoid damaging crystal/lens.

BATTERY
Timex strongly recommends that a retailer or jeweler replace battery. If applicable, push reset button when replacing battery. Battery type is indicated on caseback. Battery life estimates are based on certain assumptions regarding usage; battery life may vary depending on actual usage.

DO NOT DISPOSE OF BATTERY IN FIRE. DO NOT RECHARGE. KEEP LOOSE BATTERIES AWAY FROM CHILDREN.

TIMEX INTERNATIONAL WARRANTY
http://www.timex.com/productWarranty.html

©2019 Timex Group USA, Inc. TIMEX and INDIGLO are registered trademarks of Timex Group B.V. and its subsidiaries.

NOTES:

* The Ironman Transit+ may ship in ‘Sleep Mode’ to conserve battery power.
Press and hold any button for 2-3 seconds to wake up the watch.
** Prolonged exposure to salt water and sunlight may result in discoloration over time.

FEATURES:

• Easy Touch Heart Rate
• Daily Activity Monitor
• Workout Mode
• Time/Date (12/24 hour format)
• Chronograph
• Timer
• Daily Alarm
• INDIGLO® night-light

KEY FUNCTIONS:

There are 4 side buttons A, B, C, and D. There is a metal button E at the 6H position solely for Heart Rate measurement.

Press button C to change modes.
The sequence of modes is > Time, Workout, Workout Data, Chrono, Timer, Alarm.
Button E is solely for heart rate measurement.

EASY TOUCH HEART RATE:

Heart rate can be measured using electrodes on the watch that are located on the metal case back and button E. In order to check your heart rate you must be wearing the watch on your wrist with the case back in good contact with your skin.
In any mode, except setting mode, press and hold button E with your finger for approximately 8-10 seconds to measure your heart rate. The heart rate icon will flash on the display to indicate that heart rate is being measured.

GUIDELINES FOR MEASURING HEART RATE:

• Do not measure heart rate underwater.
• Always press the sensor, button E, directly with the finger. The finger should press the button E with the watch worn tightly around the wrist.
• If your fingers are very cold this might affect the time it takes to take your heart rate measurement.
• If you have very dry skin, moisten the fingertip and the skin on the wrist with some water.
• The use of hand creams and lotions can affect the heart rate measurement.
• Clean the back of the watch from time to time with a few drops of water and wipe it dry with a cloth to remove any grease or oils.
  If the message “do not move” is displayed, try to slow down your body movement in order to take a more accurate heart rate measurement.
• The heart rate measurement may not work correctly if you have an irregular heartbeat.

Heart rate will be displayed with unit BPM (Beats Per Minute) and at the same time % of Max.
Heart rate is displayed at the bottom right corner.
The maximum pulse is calculated as below:
Example: Age = 50
Maximum pulse = 220 – age
Maximum pulse = 220 – 50 = 170
The % of the maximum pulse is calculated as below:
Example: Pulse = 102
% of the maximum pulse = pulse x 100 / maximum pulse
% of the maximum pulse = 102 x 100 / 170 = 60 %

HEART RATE ALARM:

Heart rate boundaries can be set in the Run mode setting. There are three levels for selection. You also can manually adjust the lower and upper limits for the heart rate in setting mode.
If the measured heart rate is out of the boundary and Heart Rate Alert is set to On, then, there is a beep alert and flashing icon alert on the LCD.

DAILY ACTIVITY TRACKER:

The watch will monitor your daily activity every day, tracking your Steps, Distance and Calories burned.
You can view the records for the previous 7 days.
In Time mode, press button B to view daily activity data (Step, Distance and Calories).
Press button D to activate the last 7 days recall function. Then press button B to recall the last 7 days’ information one by one. Press button D to review the data of “Step”,  “Distance” and “Calories” for that day. All activity data will be cleared to zero at 12am each day.

TIME MODE:

Press button C until the display shows “TIME”. The watch will enter the time display view with Hours, Minutes, Seconds, Weekday, Month, Date, and Day.

In Time mode, press and hold button A to activate the Setting mode. Hour digits will start to flash. Press buttons B or D to change the setting digits. You can select the next setting by pressing button C once. The sequence of settings is Hour, Minute, Second, Year, Month, Date, 12-24 Hour, Contrast, Units, Gender, Age, Height, Weight.
Press B to increase the setting digits and D to decrease the setting digits.
Press and hold button A to exit the setting mode.

WORKOUT MODE:

Press button C until the display shows “WORKOUT”. The watch will enter the workout display view with Chrono time (Workout time) on the top line and Dist (Distance) at the lower row.

Press button B to start measurement for the exercise. The message “START” will display at the upper row for 2 seconds. Press B again to stop the measurement. The message  “STOP” will be displayed for 2 seconds on the upper row. Use button B for the run and stop operation.
Press button D to select the view for other data such as Speed (Spd), PACE, STEP, Calorie (CAL), Clock (CLK), and Distance (dIST).
If exercise is stopped, press and hold button D to clear all data and be ready for the next new measurement.
When the workout is stopped, press and hold button A to enter the Workout Setting mode. The heart rate training level will start to flash. Press buttons B or D to adjust the  level. There are three level for heart rate setting. Press button C to select next setting field. The setting sequence is Heart Rate Training Level, Heart Rate Zone High, Heart Rate  Zone Low, Zone Alarm on/off, Step Target.
Press button B to increase setting digits and D to decrease the setting digits.
Press and hold button A to exit the setting mode.

WORKOUT DATA MODE:

Press button C until the mode prompt shows “WORK DATA”. Workout data can be retrieved and displayed.

Press button B to recall Data “CHRONO – DIST”, “CAL – STEP” , “PACE”, “BEST PACE” and “SPEED”.

Remark: CHRONO is Workout Time.

CHRONOGRAPH MODE:

Press button C until the mode prompt shows “CHRO”. The watch will enter the chronograph display with prompt “CHRONO” displayed on the upper row. The Time of the  Chronograph is displayed at the lower row.

Press button B to start or stop the Chronograph. Press button D while the chronograph is running to take the “Lap” time measurement. “Lap” time view will be released in 5 sec automatically.
Press and hold button D while the chronograph is stopped to clear the chronograph.

LOOP TIMER MODE:

Press button C until the mode prompt shows “TIMR”. The watch will enter the Loop Count Down Timer display with segment (SG-1 .. SG-6) displayed on the left upper row.  The loop counter is displayed at the right upper row. The Count Down Time is displayed at the lower row.

Press button D to select the segment from SG-1 to SG-6.
Press button B to start or stop the timer operation.

Press and hold button D while the timer is stopped to clear all count downtime and reload the preset times again.
In Timer mode, press and hold button C to enter the Loop Timer Setting mode. Press button C to select the data for setting. Press buttons B or D to change the selected setting digits. The setting sequence is Timer Segment No, Timer Second, Timer Minute, Timer Hour.
Press and hold button C again to exit the setting mode.
The timer alert beep sound will be generated when each timer counts down to zero. The next segment of the timer will be loaded and start to count down automatically. The number of loops is 20. The timer will stop automatically.

DAILY ALARM MODE:

Press button C until the mode prompt shows “ALRM”. The Alarm-1 prompt “AL-1” will be displayed at the upper row. The alarm time is displayed at the lower row.

Press button D to select Alarm-1 (AL-1), Alarm-2 (AL-2) and Chime (Hourly chime function).
Press button B to turn the function on / off. If the alarm is turned on, “on” will be displayed at the bottom right corner.
If “–” is displayed, the alarm is turned off.
In Alarm mode, press and hold button C to enter the Alarm Time Setting mode. Press button C to select the data for setting. Press buttons B or D to change the selected setting digits.
Press and hold button C again to exit the setting mode.
Press any button while the alarm sound is active to turn off the sound alert.

INDIGLO® night-light:
The watch provides INDIGLO® backlight for reading the display in dark environments. Press button A in any mode to turn on the backlight. It lights up the display for 3 seconds.

BATTERY:
The watch operates with a 3V CR2032 battery. Below are some instructions for using and changing the battery.

• Never expose the battery to excessive heat such as sunlight, fire, or the like.
• Do not short-circuit the battery and do not take it apart.
• If necessary, clean the battery and unit contacts before inserting the battery.
• Dead batteries should be immediately removed from the device.
• Only replace the battery with a 3V CR2032 battery.

EXTENDED WARRANTY

Available in U.S. only. Extend your warranty for an additional 4 years from the date of purchase for $5. You can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448- 4639 during normal business hours. Payment must be made within 30 days of purchase. Name, address, telephone number, purchase date, and 5-digit model number required.  You can also mail a check for $5 to Timex Extended Warranty, P.O. Box 1676, Dept. EF, Little Rock, AR 72203.

©2020 Timex Group USA, Inc. TIMEX and INDIGLO are registered trademarks of Timex Group USA, Inc and its subsidiaries.
For more brand information, please visit www.IRONMAN.com. IRONMAN® and the ”M-DOT” logo are registered trademarks of World Triathlon Corporation. Official  Product of the IRONMAN® TRIATHLON. Used here by permission.
Register your product at https://www.timex.com/product-registration.html
Registra tu producto en www.timex.es/es_ES/product-registration.html
Enregistrez votre produit sur fr.timex.ca/product-registration.html
www.timex.fr/fr_FR/product-registration.html

Family Connect™
SENIOR
Quick Start Guide

What’s in the box

Getting to know your watch

Charging your watch
Please fully charge your watch before using it for the first time.
Ensure that the pins in the charging dock are aligned with the pins on the back cover of your Watch. Place your watch on the charging dock as shown in the illustration.
Connect the USB Type-C cable to charge your watch. Use of a 5V/1A charger is recommended.

Note: If the charging port is corroded or dirty, it may affect charging. Please keep the port clear by cleaning it periodically.

Download and install the app on your smartphone
The account holder, also known as the Primary contact, should download the app to his or her phone so that they can enter all Primary contact information and customize the watch and app experience.
The Primary Contact can be the watch wearer or a caregiver (relative or child) who looks after the watch wearer.

To download the app you can:

• Search for “TIMEX FamilyConnect™” in the Google Play store (Android 8.0 and above), or App Store (iOS 13.0 and above).
• Scan the following QR code.

https://play.google.com/store/apps/details?id=com.timex.FamilyConnect&hl=en_US&gl=US	https://apps.apple.com/us/app/timex-familyconnect/id1479794843

Powering on your watch
Long press the Power key for 3 seconds to power on your watch.

Language
You will be asked to select the system language when powering on your watch for the first time. Select the language you want and go to next.

QR code
Your watch will now show a QR code on the display. You need this to connect to the smartphone app.
This will be described in the following pages.

Create an account

1. Touch CREaTE aCCOuNT to create your TIMEX FamilyConnect™ account.
2. Enter your name, and email address and set a password for your account. (1) Verify your email address (on your phone) and accept the Privacy Policy and Terms of Service to create the account.
3. Enter the verification code sent to your email address. This email address will be used to help you reset your password should you forget it.
4. Touch Done.

(¹) Read the “Terms of Service” and “Privacy Policy” and check the box.

Adding Watch to account
Make sure the watch has a cellular data connection before pairing your watch with your phone. The connected network icon will appear at the top left of your watch’s Home screen once connected to the internet.

	LTE network
	3G network
	Data roaming network
	No data connection; calls are possible
	No network and can’t make calls

1. Touch aDD WaTCh on the Home page of the TIMEX FamilyConnect™ app.	2. Select SENIOR WaTCh OVERVIEW and aDD WaTCh. 3. If you’re the user of this watch, choose FOR ME, otherwise, choose FOR FaMILY MEMBER.
4. Follow the initial instructions to enter the basic user data of the watch user, such as their name, sex, birthday, weight, and height. Press NEXT after each step. Then enter the watch user’s daily activity goals, including the steps, distance, and calories. Users can override each setting by manually entering the total.	5. HeartFIT™ Profile requires a basic fitness assessment, and the following 3 required questions are asked here for convenience.
6. Scan the QR code to pair your watch. The QR code will appear after you enter the PIN code (see page 9). The server will send a random code to your watch and the information displayed on the screen should be noted at this time. Input the random code to the application information bar and confirm. Once the watch has been successfully paired with your phone, you will be brought to the application main screen. The location of the watch will be displayed here on the map.

Add contacts

Add phone contacts

1. Touch the left screen.
2. Touch all Contacts.
3. Touch + on the lower right of this page.
4. Enter the name, phone number, and email address. You can also upload a photo (optional). There are two identities you can choose from:
   Contact and Guardian. A Contact is only allowed to make and receive calls and texts from the watch. A Guardian must download the app to be able to locate the watch and send and receive in-app messages (text and voice) from the watch, in addition, to being able to make and receive calls and texts from the watch.
5. Touch Save.
   The contact will appear in the contact list.

Set emergency contacts
When the watch is successfully added to the app, the user is required to enter an emergency contact.

1. Touch +.
2. Add a contact manually (enter the name, phone number, and email address) or touch the contacts icon to search for and select an existing Contact.
3. Touch Save.

SOS function

Press and hold the SOS key for 3 seconds to make an SOS call to the predefined emergency contact.
When an SOS is sent, the Primary contact and each Guardian will receive an app notification and an SMS informing them that an SOS alert has been issued. These messages will contain a link to the location of the watch.

Using your watch
Screen
Press the Power key to wake up the Home screen.

Select and exit applications
From the home screen, swipe left to view the various applications on the watch. Touch an application to select it. Touch or press the SOS button to exit.

Weather display and Notifications
To get to the weather view, swipe down on the home screen. The weather is displayed in this view. You also have the option of adjusting the screen brightness and volume and activating flight mode or switching off the device.

Swipe up from the home screen to go to the notifications view.

Applications

Phone

Select Phone to bring up the Phone menu.
Touch a contact or enter the desired number and then press the yellow button to start the call.

Contacts
Touch a contact and choose to start a call.
Touch to end the call.
Contacts can be added via the paired app.
Messages
Recent Messages: Touch a contact to read the recent messages.
Send Message: Choose a contact to send a message, touch the app to send to your TIMEX FamilyConnect™ app, and touch Tex t to send to your phone.
health
Health is created for health-related features, including Activity, Sleep, and Heart Rate.
Activity
Your daily performance of steps taken is displayed, as well as the distance covered and the calories burned.
Sleep
Your watch will monitor your sleep status if you activated the Sleep mode on your TIMEX FamilyConnect™ app. The sleep status includes the monitoring time, the total hours slept, and the number of awake, deep, or light sleep hours.
PaI
Based on your profile, heart rate, and activity, see your PAI score and points earned today. Also, view your 7-day PAI score history.

Heart Rate
Starts measuring your heart rate. This is displayed after a short measuring time.
NOTE: This is not a medical device and is not recommended for use by persons with serious heart conditions. Consult your physician before beginning any exercise program.

Daily Planner
Allows you to set the alarm clock, to-do list, and medicine reminder.
Alarms
Set your alarm clock and touch the switch to enable/disable it.
Reminders
Set the to-do list on your TIMEX FamilyConnect™ app and add a title to each reminder for easy identification. When you receive a reminder, you can touch to snooze and remind yourself again after 10 minutes or touch to end it right now.

Medications

Set your Medication reminder on your TIMEX FamilyConnect™ app, it is the highest priority notification on your watch. When you receive it, touch to read the instructions on taking medication, touch to snooze, and remind you again after 10 minutes, touch to end it right now.

More

	Check-In: To send your current location, follow the steps on the display. Your emergency contact and guardians will receive notifications that can open the Map View on the mobile app.
	Calculator: A handy device for quick calculations.
	Stopwatch: A simple stopwatch that counts up, can be paused, and allows you to take splits.
	Timer: Choose from 5 preset countdown timers that autostart, or set your own up to 99 minutes, 59 seconds. Watch tone sounds at the end.

Settings
Provides access to the settings menu of the watch, which allows the further configuration of the device, including watch faces.

Senior Fall Detection
When the watch detects a fall event, an alert is displayed asking the user to acknowledge the event. The user can respond:

• “I AM OK”
• “SEND HELP”

If the fall resulted in no injury, or it is a false alert, the user can cancel sending this alert by pressing “I AM OK” in 60 seconds. After confirming they are OK, the alert screen goes away, and the user is returned to the previous screen.

If the user touches “SEND HELP”:

• A notification is sent to the Primary and Guardian contacts. In the notification, the watch’s current longitude and latitude information is included.
• At the same time, there will be two short rings twice followed by a long vibration that the user can cancel on the watch.
• The watch automatically calls the predefined Emergency Contact

If the user does nothing for 60 seconds (cannot touch the watch screen or is physically unable to respond to the fall detection event):

• The watch automatically calls the predefined Emergency Contact
• A notification is sent to the Primary and Guardian contacts.

In the notification, the watch’s current longitude and latitude information is included.

NOTE: The fall detection feature does not detect 100% of falls. If able, users should always press their SOS key when they need help.

Straps

Remove straps

Attaching new straps

Splash Resistance
The watch is rated IP67 for dust and splash resistance. You CaNNOT immerse the watch in water (for swimming or other sports), and it should not be worn during showering or bathing.
Care should be taken to avoid exposure to moisture due to rain, hand washing, or perspiration.

Specifications

FAQ’s

What operating systems does the application support?
The app is compatible with Android 8.0 or higher or iOS 13.0 or higher.

If you are unable to add your watch:
i) Make sure the SIM is inserted correctly.
• If the SIM is inserted correctly, check to see if LTE is displayed on the top left of the screen of your watch.
• If not, long-press the Power key for 3s to restart the watch.
ii) If LTE is displayed, check to make sure there are no overdue network charges that need to be paid.

If you are unable to obtain the position of your watch:
i) Check to see if LTE is displayed on the top left of the screen of your watch.
ii) If not, long-press the Power key for 3s to restart the watch.
iii) If LTE is displayed, check to make sure there are no overdue network charges that need to be paid.

If you are unable to obtain the verification code during registration:
Please check your junk emails. If you still cannot obtain it, please try to get the verification code again.

How do I charge my Timex Family Connect watch?

To charge your watch, fully align the pins in the charging dock with the pins on the back cover of your watch. Connect the USB Type-C cable to charge your watch using a 5V/1A charger.

How do I download and install the TIMEX FamilyConnect app on my smartphone?

You can search for “TIMEX FamilyConnect” in the Google Play store (Android 8.0 and above) or App Store (iOS 13.0 and above), or scan the QR code provided in the user guide.

How do I add contacts to my Timex Family Connect watch?

To add phone contacts, touch the left screen, then touch all Contacts, then touch + on the lower right of this page. Enter the name, phone number, and email address, choose Contact or Guardian identity, and touch Save. To set emergency contacts, touch +, add a contact manually or search for an existing contact, and touch Save.

How do I use the SOS function on my Timex Family Connect watch?

Press and hold the SOS key for 3 seconds to make an SOS call to the predefined emergency contact. The Primary contact and each Guardian will receive an app notification and an SMS informing them that an SOS alert has been issued.

How do I navigate and use the various applications on my Timex Family Connect watch?

From the home screen, swipe left to view the various applications on the watch. Touch an application to select it. Touch or press the SOS button to exit. To get to the weather view, swipe down on the home screen. Swipe up from the home screen to go to the notifications view.

How do I set alarms and reminders on my Timex Family Connect watch?

Use the Daily Planner application to set alarms, to-do lists, and medication reminders. Set your alarm clock and touch the switch to enable/disable it. Set the to-do list on your TIMEX FamilyConnect app and add a title to each reminder for easy identification. When you receive a reminder, you can snooze or end it right away.

Is the heart rate monitor on my Timex Family Connect watch a medical device?

No, the heart rate monitor on your watch is not a medical device and is not recommended for use by persons with serious heart conditions. Consult your physician before beginning any exercise program.

How do I configure the settings on my Timex Family Connect watch?

Use the Settings application to access the settings menu of the watch, which allows further configuration of the device, including watch faces.

What is Senior Fall Detection on my Timex Family Connect watch?

Senior Fall Detection is a feature that alerts the user when a fall event is detected. The user can acknowledge the event by responding “I AM OK” or “SEND HELP”. If the user touches “SEND HELP”, an alert is sent to the emergency contact and guardians.

Positioning accuracy

Your watch will provide 5 different positioning modes: GPS, AGPS or Glonass, G Sensor, WLAN, and Base Station. Position accuracy will differ according to each positioning method. Sometimes, in tall buildings and other urban obstructions, there may be a small chance of a larger deviation.

Storage and use of my location data
The Timex Device automatically and constantly collects information about the physical location of the Timex Device when it is activated.
This information is acquired through numerous methods, including GPS, cell towers, and wi-fi hot spots, which are enhanced over time as we follow the Timex Device, collect more information, and improve our tracking. You may not disable location-based data collection from the Timex Device. We may also, collect such location-based
information through your use of the Timex App.

More information
For more information, please refer to the help section in the TIMEX FamilyConnect™ app.
Please note the “Terms of Service” and “Privacy Policy” that will be displayed when you create your account.
To view the User Manual, watch HowTo videos, and find other valuable resources, scan the following QR Code to go to the FamilyConnect™ SENIOR page on Timex.com.

https://www.timex.com/family-connect-senior

Approved Firmware Versions
This device will only operate with firmware versions that have been approved for use by your wireless carrier and the device manufacturer. If unauthorized firmware is placed on the device it will not function.

Information About Safeguarding Devices

We encourage customers to take appropriate measures to secure their devices and invite them to take advantage of the features available on this device to help secure it from theft and/or other unauthorized access and use. This device has a locking function (e.g., user-defined codes or patterns) that can serve as the first line of defense against unauthorized use or access to stored information. Preloaded security applications that allow customers to track or locate misplaced devices can be found on several devices. Lost or stolen devices should be immediately reported to your wireless carrier so that proper measures can be taken to protect accounts. For additional information, visit your wireless carrier’s Privacy Policy.

Customer Support

For T-Mobile Customer Service, Please go to www.t-mobile.com, or call toll-free at 1-800-937-8997.
For more information visit: https://support.t-mobile.com/docs/DOC-41123

©2021 Timex Group USA, Inc. TIMEX, HEARTFELT, and FAMILY CONNECT are trademarks of Timex Group USA, Inc. in the US and other countries. PAI and the PAI logo are trademarks of PAI Health Inc.
IOS is a trademark or registered trademark of Cisco in the US and other countries and is used under license. Android is used according to terms described in the Creative Commons 3.0 Attribution License.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Qualifying service and compatible smartphone required.
Your device may not work if you alter its original software.
Items imported. See each item for country of origin. Contains Li-ion polymer battery, dispose of per local regulations and not as household waste. FCC ID: 2ACCJB128. Images simulated.
Coverage is not available in some areas. See enclosed Terms and Conditions for additional information, restrictions and details.
Printed in China

FamilyConnect™
SENIOR

Safety and Regulatory Information

CQF1R61TBAAA 1

Safety and Use

We recommend that you read this chapter carefully before using your device. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use or use contrary to the instructions contained herein. Use of connected devices subject to T-Mobile’s Terms and Conditions.

Traffic Safety

Always obey the local laws and regulations addressing the use of wireless mobile devices and their accessories in the areas where you drive. The use of mobile devices while driving may be prohibited or restricted in certain areas.

Conditions of Use

You are advised to switch off your device from time to time to optimize its performance.

Operational Warnings: Only use your device in accordance with local laws and regulations and obey all posted notices in public areas.
Do not attempt to disassemble your device. If you disassemble your device, the warranty will not apply.
Always handle your device with care and keep it in a clean and dust-free place.
Do not allow your device to be exposed to adverse weather or environmental conditions (moisture, humidity, rain, infiltration of liquids, dust, sea air, etc.). The manufacturer’s recommended operating temperature range is -10°C (14°F) to +45°C (113°F)
Use only batteries, battery chargers, and accessories that are recommended by the Device manufacturer and its affiliates and are compatible with your device. The device manufacturer and its affiliates disclaim any liability for damage caused by the use of other chargers or batteries.

Use a suitable plastic strap, do not use a metal strap.
Please check local laws and regulations in your jurisdiction to learn how to best dispose of your device.

To prevent possible hearing damage, do not listen at high volume levels for long periods. Exercise caution when holding your device near your ear while the loudspeaker is in use.

Privacy

Please note that you must respect the laws and regulations of your jurisdiction or other jurisdiction(s) where you will use your device regarding recording sounds with your device. Pursuant to such laws and regulations, it may be strictly forbidden to record the voices of other people or any of their personal attributes, and reproduce or distribute them, as this may be considered to be an invasion of privacy.

It is the user’s sole responsibility to ensure that prior authorization be obtained, if necessary, in order to record private or confidential conversations; the manufacturer, the seller or vendor of your device (including the operator) disclaim any liability which may result from the improper use of the device.

FCC Compliance

Any changes or modifications not expressly approved by the party responsible for compliance of this device voids the user’s authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radio Waves

THIS DEVICE MEETS GOVERNMENT REQUIREMENTS FOR EXPOSURE TO

RADIO WAVES.
Your device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluations of scientific studies. These guidelines include a substantial safety margin designed to ensure the safety of all persons, regardless of age and health.

The exposure standard for watches employs a unit of measurement known as the Specific Absorption Rate or SAR. The SAR limit set by public authorities such as the Federal Communications Commission of the US Government (FCC), or by Innovation, Science and Economic Development Canada (ISED), is 1.6 W/ kg averaged over 1 gram of body tissue, and Limbs is 4.0 W/Kg averaged over 10 grams. Tests for SAR are conducted using standard operating positions with the device transmitting at its highest certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output of the device. Before a device model is available for sale to the public, compliance with national regulations and standards must be shown.
The highest SAR value for this model device when tested is 1.36 W/Kg for use close to the body, and 0.8 W/Kg for Limbs.

During SAR testing, this is set to transmit at its highest certified power level in all tested frequency bands and placed in positions that simulate RF exposure in usage near the body with the separation of 10 mm, and the Limbs with the separation of 0 mm.

Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network.
In general, the closer you are to a wireless base station antenna, the lower the power output.
Additional information on SAR can be found on the Cellular Telecommunications & Internet Association (CTIA) Web site: http://www.ctia.org/

Battery and Accessories

Observe the following precautions for battery use:

• Do not attempt to open the battery (due to the risk of toxic fumes and burns).
• Do not puncture, disassemble or cause a short-circuit in a battery.
• Do not burn or dispose of a used battery in household rubbish or store it at temperatures above 60ºC.
• Do not disassemble or open crush, bend or deform, puncture or shred.
• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, expose to fire, explosion, or another hazard

Products that have the below symbol must be taken to collection points at the end of their life:

• Municipal waste disposal centers with specific bins for these items of equipment.
• Collection bins at points of sale.

You can learn more about how to recycle your device by visiting the CTIA website at www.ctia.org/news/how-to-recycle-yourmobile-device

CAUTION: IF THE BATTERY IS REPLACED BY AN INCORRECT TYPE, THE DEVICE MIGHT EXPLODE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTION.

WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Chargers

Home A.C./Travel chargers will operate within the temperature range of: 0°C (32°F) to 45°C (113°F).

The chargers designed for your device meet with the standard for safety of information technology equipment and office equipment use. Due to different applicable electrical specifications, a charger you purchased in one jurisdiction may not work in another jurisdiction.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Device Manufacturer and its affiliates is under license. Other trademarks and trade names are those of their respective owners.

FCC Compliance (FOR PART 15B/PART 15C)
FCC ID: 2ACCJB128

Recycling Information

Call Recycle Customer Support at 1-800822-8837 for recycling instructions.

©2021 Timex Group USA, Inc. TIMEX and FAMILY CONNECT are trademarks of Timex Group USA, Inc.

Printed in China

DGTL Ana-Digi 03X Wrist Watch User Guide

DGTL Ana-Digi Model 03X

03X-096000 7.29.19
Register your product at https://www.timex.com/product-registration.html

EXTENDED WARRANTY

Available in U.S. only. Extend your warranty for an additional 4 years from the date of purchase for $5.You can pay with AMEX, Discover, Visa or  MasterCard by calling 1 800-448-4639 during normal business hours. Payment must be made within 30 days of purchase. Name, address, telephone number, purchase date, and 5-digit model number required. You can also mail a check for $5 to Timex Extended Warranty, P.O. Box 1676, Dept.EF, Little Rock, AR 72203.
Please read the instructions carefully to understand how to operate your Timex ®watch.

FEATURES AND BASIC OPERATION

1. Date with MM-DD format (month/day)
2. 24-Hour Stopwatch with Split time
3. Daily Alarm and Hourly Chime
4. Dual Time (2nd Time Zone)
5. INDIGLO® night-light
   

Button functions shown with setting functions in parentheses
TIME
To set time and date

1. To start your watch remove the plastic guard from under the crown, then press the crown in against the case. The second hand will begin advancing in one-second intervals.
2. Pull the crown out all the way and turn to the correct analog time. Push the crown in to restart the analog watch.
3.  From Time of Day mode in the digital watch, press and hold RESET. The watch beeps and Seconds can be seen flashing.
4.  Press ST/STP to set Seconds to zero.
5.  Press MODE to set Hours, as indicated by its flashing. Press ST/STP to advance the Hours setting. Press and hold to increment quickly.
6. Press MODE to set Minutes, as indicated by its flashing. Press ST/STP to advance the Minutes setting. Press and hold to increment quickly.
7. Press MODE to set the Year number, as indicated by its flashing. Press ST/STP to advance the Year setting. Press and hold to increment quickly
8.  Press MODE to set the Month number, as indicated by its flashing. Press ST/STP to advance the Month setting… Press and hold to increment quickly.
9.  Press MODE to set the Date, as indicated by its flashing… Press ST/STP to advance the Date setting… Press and hold to increment quickly.
10.  Press RESET to exit Time Set.
11. To toggle between 12-Hour (A/P indicator) and 24-Hour time format, press
    RESET.
    Note: Press and hold ST/STP to peek at Month Number and Year.

ALARM

To turn on/off or to set the Daily alarm, or to turn on/off an hourly chime.

1. Press MODE until “AL” appears.
   Note: The alarm settings are tied to the primary time zone (T1).
2. Press ST/STP repeatedly to toggle the Alarm () on/off, to toggle the Hourly Chime ( ) on/off, or to toggle both on/off.
3.  To Set the Alarm, press RESET. The Hour digit flashes and the Alarm ON () lights.
4. Press ST/STP to advance the Hours setting. Press and hold to increment quickly.
   Note: The Hours will be presented in the same format (12- or 24-hour time) as the time setting
5.  Press MODE to set the Minutes as indicated by its flashing. Press ST/STP to advance the Minutes setting. Press and hold to increment quickly.
6. Press RESET to exit the Alarm Set.
7. When the alarm sounds, press ANY button to silence the alert, or it will stop automatically in about 60 seconds.

STOPWATCH

Use this function for timing events.

1. Press MODE until “SP” appears.
2.  Press ST/STP to start timing.
3. With the stopwatch running, press RESET to record the Split time. The display will show the Split time, but the stopwatch will continue timing in the background.
4. Press RESET to release the display and show the current running stopwatch time.
5.  Press RESET to record another Split time.
6.  Press ST/STP to pause the timing.
7.  Either press ST/STP to resume timing, or press RESET to reset the  Stopwatch to zero.

DUAL TIME

To set the time for a second time zone

1.  Press MODE until “T2” appears.
2. Press RESET.The Hours can be seen flashing. Press ST/STP to advance the Hours setting. Press and hold to increment quickly.
3.  Press MODE to set Minutes, as indicated by its flashing. Press ST/STP to toggle between the same Minutes setting as Time Mode (T1) or 30 Minutes difference.
4.  Press RESET to exit Dual Time Set.

Note: The Hours will be presented in the same format (12- or 24-hour time) as the time setting.
INDIGLO® NIGHT-LIGHT
Press the INDIGLO® button to illuminate the watch display for 2-3 seconds. Electroluminescent technology used in the INDIGLO® night-light illuminates the watch face at night and in low light conditions.

WATER AND SHOCK RESISTANCE

If your watch is water-resistant, meter marking or () is indicated

*pounds per square inch absolute
WARNING: TO MAINTAIN WATER RESISTANCE, DO NOT PRESS ANY BUTTONS UNDERWATER.

1.  Watch is water-resistant only as long as a lens, push buttons and case remain intact.
2.  Watch is not a diver watch and should not be used for diving.
3. Rinse watch with fresh water after exposure to saltwater.
4. Shock resistance will be indicated on the watch face or case back. Watches are designed to pass the ISO test for shock resistance. However, care should be taken to avoid damaging crystal/lens.

BATTERY
Timex strongly recommends that a retailer or jeweler replace the battery. If applicable, push the reset button when replacing the battery. The battery type is indicated on the case back. Battery life estimates are based on certain assumptions regarding usage; battery life may vary depending on actual usage.
DO NOT DISPOSE OF BATTERY IN FIRE. DO NOT RECHARGE. KEEP LOOSE BATTERIES AWAY FROM CHILDREN.
TIMEX INTERNATIONAL  WARRANTY
http://www.timex.com/productWarranty.html
©2019 Timex Group USA, Inc. TIMEX and INDIGLO are registered
trademarks of Timex Group B.V. and its subsidiaries.