ToSee Doorbell Camera Manual

Note
It’s a battery-powered doorbell, The Doorbell Support two 18650(1PCS3400MAH). The DC 5V micro USB power supply, you can make it work, and also you can power the rechargeable batteries no need to uninstall the batteries; Also if you want to use existing power supply, you can make it work with AC 824V power adapter. First: Install battery or AC 8-24V (Picture 1) Second: Doorbell is Red light (Picture 2). If Blue light, hold the reset key for 5~10 seconds. (Picture 3)

Connect Device

1. Download App”To see”from Google Play or IOS Store.(Please allow all the phone notifications permissions for better user experience)
   
2. Open the App and Tap”+”button on the right corner and click “Add Device”
   

Network Configuration

1. Click”The Red Light is flashing” (Picture 1)
2. Click”Enter The Configuration Interface” (Picture 2)
3. Choose WIFI device” Tosee” (Picture 3)
   
4. Connect the wifi sent by the device” Tosee” (Picture 4 )
5. If you see the green icon, the connection is successful. “Next” (Picture 5)
6. Choose your home Router WIFI account and password, And “next ” (Picture 6)
   
7. The Device administrator password is used to share and configure the device . Please keep it secure .” Next” (Picture 7)
8. Add a name to your device. “Confirm” (Picture 8)
9. The device added successfully. Double click to open video! (Picture 9)
   

Note:
If you need to reconfigure your wifi network. Press and hold the reset key for 5~10 seconds(Picture 1), The Red light will flash slowly and you can follow the instructions again to connect. (Picture 2)

Main Interface Functions

Share

Note: Share up to 5 people. And only 3 people online Same time.
First: click: Input Device Password (Picture 1) Second: Click” Share” (Picture 2) thirdly: Using another phone, Open To see, Tap “+ “Button, and Choose “Scan QR Code”. Input Password Then is OK.

c=wi9cd1ls&d=KaKhIgOaJcOcKbKhObLkPnKdOoKgJkImKoMaOh&n=wife&t=1&s=0

Device Settings

First: click : Input Device Password Picture 1

1. Ultra Low power Consumption: Open
2. Device Indicator Light: Open
3. Night Vision Infrared Light: Open
4. Ring Volume: Open
5. Video Length: The recording time can be adjusted when someone enters the area.
6. Motion Detection Sensitivity: Sensitivity can be set: high, medium, and low
7. Intercom Volume: Adjustable volume
8. Format SD Card: Please format SDcard for the new machine
9. Device Information: Can update the device Firmware