TREBLAB N8 Wireless Earbuds Manual

TREBLAB N8 Wireless Earbuds User Manual

Package contents

micro-USB charging cable
Large silicon Ear-trip
Large Ear-fans
Medium silicon Ear-trips
Medium Ear- fins
TREBLAB N8 Earbuds
Small silicone Ear-trips
Small Ear-fins

Earbuds Function

Operation	Operation
Power On	Press and hold POWER button for 2 seconds
Power Off	Press and hold POWER button for 2
Pause / Play	Press POWER button
Volume+	Press Volume+
Volume-	Press Volume-
Next track	Press and hold Volume+ for 2 seconds
Previous track	Press and hold Volume- for 2 seconds
Answering Call	Press POWER button, during the incoming call
End call	Press POWER button, during the conversation
Reject	Press POWER button twice during the incoming call
Redial	Press POWER button twice

Wearing Method

(Ear – fins)
Using the correct size ear-tips and ear-fins is critical for maximum external noise isolation and a snug secure fit. It is also common to have different sized ear canals so try the eartips and ear-fins one at a time to find the best fit for each side.

Identify the left and right ear-tips. Look for L/R mark near the round hole in the ear-fin, which is used to fix It on the earbud. Then choose the size that best fits each ear – 5, M or L.
Place the assembled earbud with the ear-tip in your ear canal and tuck the ear-fin into the front ear fold facing up. Adjust the ear-fin to a suitable angle until you have a tight and snug fit.
Please try various supplied ear-tips and ear-fins to find comfortable and better fit.

Ear-tips
Ear left , Right

To change the silicone ear-tips comfortably, kindly follow the next steps

Fix the rubber ear-fin in the hooking position (you can remove it entirely for better fitment)
Turn over the ear-tip upper cover
Rotate and push the ear-tip tube to cover the ear-tip pillar forcefully.

Charge the earbuds

When earbuds’ battery is low level, there will be a ‘Battery Low” voice prompt in your earbuds, and a red light flashing every 5 seconds.
Using the provided USB/micro-USB cable, connect the micro-USB end of the charging cable to the micro•USB charging port and the standard USB end to a PC USB port or USB charger
The LED indicator will be red while charging. It will turn blue after 1-2 hours. The battery is now fully charged.

Pairing

Press and hold POWER button for 4 seconds. You will hear “Power ON” voice prompt in the right earbud. Keep pressing POWER button for 2 more seconds until you hear”Pairing” voice prompt. Release your finger (Red and blue LED lights will flash rapidly).
Turn the Bluetooth mode on your device and keep it within 3 feet / 1 meter from the earbuds while pairing.
Using your device, scan/search for available Bluetooth devices (check your device’s manual if you’re unsure how to do this).
Select TREBLAB N8 from the list..
If prompted by your device to connect, select YES.

You will hear”Connected” after successful pairing, and the LED will start flashing blue every 5 seconds.

When you turn the earbuds ON, they will try to reconnect with the most recently connected device. If re-connection does not happen automatically, the earbuds will try to find the next device in the pairing list.

TREBLAB N8 can be paired to only 1 device at a time. To connect N8 to another device, temporarily switch OFF the Bluetooth mode on the first device you connected to.

Repeat steps 1-8 and connect the other device. Turn Bluetooth mode back ON for the first device.

After the connection is lost, the N8 will try to reconnect automatically to the last paired device.

Phone calls

To answer an incoming call: Single click POWER button.
To reject an incoming call: Double click POWER button.
To finish the conversation: Single click POWER button while on the line.

Troubleshooting

Device cant find TREBLAB N8	Ensure the N8 is in pairing mode, and LEDs flash blue and red. Refer to the previous section on how to enter pairing mode. If N8 is in pairing mode and flashes blue and red, but is still not found by your device, please restart your device and the headset.
Frequent disconnection and noise	Ensure the distance between your device and TREBLAB N8 is less than 33 feet / 10 meters. Ensure nothing is blocking the signal between your device and your Bluetooth earbuds. For optimal sound quality, the distance between your device and the earbuds must be less than 33 feet / 10 meters, in an open space with no solid obstacles in the way.
Can’t turn the earbuds ON	Please make sure the earbuds are charged, if not – charge them, and try again.
Can’t connect the earbuds ON	Can’t connect the earbuds Reset N8 to factory settings by following instructions for a hard reset to your device (on the next page).
–	Go to your device’s Bluetooth menu and delete all saved devices from the list by clicking “Forget this device”. Turn your device’s Bluetooth OFF then turn it back ON; TREBLAB N8 will be deleted. Power OFF the device then turn back ON. Enter the earbuds into the pairing mode and follow instructions for connecting.

Restore factory settings

Go to your device’s Bluetooth menu and delete TREBLAB N8 from the list of paired devices, by clicking “Forget this device”. Turn your device’s Bluetooth then turn it back ON; TREBLAB N8 will be deleted.
Press and hold Volume+ and Volume- buttons simultaneously for 3-5 seconds, until blue and red LED flashes 3 times.
Power OFF the earbuds then turn back ON and follow the instructions for pairing.

Safety Rules

Never disassemble or modify your headset for any reason. Doing this may cause the headset to malfunction or become combustible. The damage to your device can void your manufacturers warranty.
Do not allow your device to get wet – liquids can cause serious damage. Water damage to your device can void your manufacturer’s warranty.
Excessive sweating may damage the product. Make sure to wipe the
headphones dry before charging.
Avoid exposing TREBLAB N8 to extreme temperatures (below 37°F /3°C or above 112°F / 45°C). Extreme temperatures can cause deformation of N8 components, reduce battery life and the lifespan of your new earbuds.
Avoid putting device’s LED lights close to the eyes of children or animals.
Do not use your N8during a thunderstorm. Thunderstorms can cause serious malfunction and increase the risk of electric shock.

Battery information

Your device is powered by a rechargeable battery.
Unplug the headphones from the electrical plug when not in use.
If left unused, a fully charged battery will lose its charge over time.
We recommend a full charge twice a month to ensure battery integrity.
Please do not leave the device (and charging dock) in hot or cold places, such as in a closed car in summer or winter conditions because this will reduce the capacity and lifetime of the battery.
Do not dispose of the batteries in a fire as they may explode.
Batteries may also explode if damaged.

Recycling

The earbuds can be recycled, and they should be in order to keep our planet
clean. Where should you take them?

In the US, there are a couple of options:

Best Buy has a recycling program.
Just take the broken earbuds with you next time you visit a BestBuy store.
This
link will help you to find the most convenient location:
httos://www.bestbuv.com/site/store-locator/
Check for other possible locations near you on these websites (just enter your ZIP to find a location): httos://search.earth911.com httos://recyclenation.com/find httos://www.cta.tech/Consumer-Resources/Greener-Gadgets

In Canada, please visit the link below for help: https://thinkreuse.net In UK,please visit the link below for help: https://www.recycle-more.co.uk/

Specifications

Battery	Up to 7 hours (100% volume) 120 mAh, 3.7 V, rechargeable Input 5V / 1A
Charging time	1.5-2 hours
Bluetooth version	4.1
Signal Range	33ft/10 m
Frequency response	20 Hz-2 KHz
Water resistance	IPXS
Charging port	Micro-USB
Culpability	i05 / Android /Windows

Thank you

We truly appreciate that you chose TREBLAB as your trusted brand of wireless earbuds and sincerely hope that you enjoy the great sound and seamless usability TREBLAB NB provides. We love making our customers happy by providing true value with our products.

If for any reason you are not completely satisfied with your purchase or have any questions, please visit www.treblab.com and click Support Contact Us. We care about our customers more than anything and are always here to serve you.

One Year Warranty

ONE YEAR PARTS AND LABOR WARRANTY.

Please visit www.treblab.com to register YOUR product.