Loading manuals...

TWS 2AMD8Z12409 AIRBUDS TRUE WIRELESS SPORT Manual


TWS 2AMD8Z12409 AIRBUDS TRUE WIRELESS SPORT Manual Image

AIRBUDS
TRUE WIRELESS SPORT
FCC ID: 2AMD8Z12409

USER MANUAL FOR # Z12409

OUICKSTART FOR PAIRING

POWER ON

  • Take the AIRBUS out of the case, AIRBUS will turn on automatically
  • Or touching both AIRBUDS sensor areas for 3 seconds, AIRBUS will power on and you will hear sound ‘power on
  • Earbuds will pair with each other automatically when powered on

POWER OFF

  • Put the AIRBUS in the charging case. AIRBUS will turn off automatically
  • Or touching both AIRBUDS sensor areas for 5 seconds, AIRBUS will power off and you will hear ‘power off’
  • The AIRBUS will power off automatically if powered on for 3-5 minutes but not connected to any devices

AIRBUS TWS

  • Driver: Tommy
  • Frequency: 20hz – 20khz
  • Impedance: 320
  • Sensitivity: 100DB +/-5DB
  • Capacity: Airbus 45mAh/charging case 350mAh
  • Playing time: 3Hours
  • Charging time:1-1.5H
  • BT version: 5.0
  • Distance:33ft
  • Chip: JL
  • Charging voltage and currents:
    Case: DC 5V/500mA Airbus: DC 5V/40mA

PAIR THE AIRBUS WITH YOUR DEVICE.

  1. Make sure the connection is within 10ft between the earbuds and your mobile device
  2. After turning on both earbuds, wait for 3.8 seconds for pairing to each other. Once paired to each other, the indicator on the master side flashes in red and blue interactively, and the other earbud indicator flashes in slow blue only.
  3. Activate your Bluetooth in your device, and select “AIRBUS TWS” to pair. Once successfully paired with your device, the indicators on each earbud will turn off.

‘Noted: If the earbuds fail to pair with each other, you need to pair them by the below steps:

  1. Turn off the earbuds by long-pressing the sensor area for 3 seconds (All LED indicators will turn off)
  2. Turn off your Bluetooth on your device, and power on both earbuds via long-press both earbuds sensor area for 3 seconds.
  3. Quick touching 3 times left earbud, there is a sound ‘Bluetooth connected:
  4. After the earbuds pair successful, the left earbud will flash red/blue, the right earbud will flash blue every 5 seconds.

REPAIR THE EARBUDS WITH YOUR DEVICE
When turning on the earbuds, they will automatically pair with the device that was paired previously.

ANSWER/REJECT THE CALL

  • To pick up an incoming call, touch 1 time of the sensor area to answer, or pick up the call via phone.
  • Long touching 2 seconds of the sensor area to reject an incoming call.
  • To hang up a call, touch 1 time of sensor area to hang up the call when it’s in a phone call.
  • Long touching 2 seconds of the sensor area to redial the last number in your calling history.

Music

  • Touching 1-time sensor area to play / pause
  • Long press RIGHT earbuds sensor area for 3 seconds to wake up siri
  • Double click the LEFT earbuds sensor area to the previous track
  • Double click the RIGHT earbuds sensor area to the next track
  • Click the LEFT earbuds sensor 3 times to decrease the volume
  • Click the RIGHT earbuds sensor 3 times to increase the volume.

Charging the Earbuds

  • There is a prompt sound ‘Low battery’ if the earbuds battery low
  • The led light up and hold red when earbuds are charging
  • Led turn off when the earbuds are full charged

The Charging Case

  • The led light up and holds red when the case is charging
  • Led turn off when the case is fully charged
  • Press the power button on the case to start/stop charging the earbuds
  • The case’s LED light up and hold blue when it charging the earbuds
  • The case’s LED flashes blue when the case battery is low, please use the micro cable charging the case FM2 Make sure the below points are read in advance in case of an unsuccessful pair with your device:

FandQ

Make sure the earbuds are in pairing mode. make sure the Bluetooth in your device is activated.

  • Make sure both earbuds are charged with power.
  • Can I change the battery in my earbuds and charging case?—The battery of the earbuds are with a non-removable battery.
  • Make sure the charging case is pre-charged before you plug the earbuds into the charging case to charge your earbuds.

Instruction of safety use to charge the lithium battery.

  • Charging case Input: DC 5V/500mA
  • Please use the USB charger that is with safety compliance(not included)
  • Charging environment: 10- 50 Celsius degrees
  • Please do not expose the product under solar light or in a fire environment.
  • Please turn off the product after using it.
  • After the indicator Red color off, the Blue color lights up and after 10-15 minutes it turns off, it’s indicating that the power is fully charged.
    Here the indicator turns into blue color for only 10-15 minutes is to minimize the power consumption from the charging case after the earphones get fully charged, otherwise, if the indicator keeps the blue color on after the earbuds get charged, the battery of the charging case will lose out fast.

2020 AFH INDUSTRIES INC. ALL RIGHTS RESERVED.
AIRBUS IS A REGISTERED TRADEMARK OF AIRBUS LTD. MANUFACTURED AND SERVICED BY AFH INDUSTRIES INC. 110 WEST 34TH STREET. 7TH FLOOR. NEW YORK, NY 10001 FOR PATENTS: AIRBUDS.COM/PATENTS CONTENTS AND COLORS MAY VARY FROM ILLUSTRATED. THE  BLUETOOTH WORD MARK AND LOGOS ARE OWNED BY THE BLUETOOTH SIG, INC. FOR AGES 12+. THIS IS NOT A TOY. I MADE TO CHINA.


More Manuals From TWS