Tzumi Probuds V2 Earbuds Manual

Probuds V2 CHARGING THE CASE

• When the earbuds are low in power, you will hear “Battery Low”. Place the earbuds into
• their respective slots in the charging case.
• They will automatically begin to charge. The LEDs will turn solid red while charging. The
• LED on the bottom of the case will turn White
• Once fully charged, the LEDs on the earbuds and case will turn off.

When the earbuds are low in power, you will hear “Battery Love”. Place the earbuds into their respective slots in the charging case. They will automatically begin to charge. The LEDS will turn solid red while charging. The LED on the bottom of the case will turns White. Once fully charged, the LEDs on the earbuds and case will turn ort.

Warnings

• Do not use this unit for anything other than its intended use.
• Keep the unit away from the heat sources, direct sunlight, humidity, water or any other liquid.
• Do not expose the device to extremely high or low temperatures, as it may damage the battery.
• Do not operate the unit if it has been wet or moist to prevent electric shock and/or injury to yourself and damage to the unit.
• Do not use this unit if it has been dropped or damaged in any way.
• Repairs to electrical equipment should only be performed by a qualified electrician.
• Improper repairs may place the user at serious risk.
• Keep this unit out of reach of children
• This unit is not a toy.

BATTERY DISPOSAL

This product contains a lithium polymer battery. Lithium polymer batteries are environmentally safe when fully discharged. Please refer to your local and state laws for battery disposal procedures.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Warning: Changes or modifications to this unit are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirements. in portable exposure conditions without restriction.

FAQs

Is Probuds V2 a genuine product?

True Wireless Bluetooth Earbuds with Charging Case, Auto Pairing, and Built-In Mic – Probuds V2.

What is the lifespan of Probuds V2?

Up to 23 Hours of Audio Bliss-ProBuds Lava’s 2 have 5-hour battery life in the buds, which can be extended to 23 hours with the 370 mAh charging case.

Is Probuds V2 compatible with iPhone?

Yes, your earphones will work with iPhones, iPods, and iPads that have Bluetooth® built-in.

How do I use ProBuds to link two iPhones?

To enter earbuds pairing mode, quickly push both earbuds on multi-function three times. Wait a few seconds for the two earbuds to connect. If the device is connected, the blue light will flash once every 7 seconds. Both earbuds are now operational.

What is the best way to utilise my Probuds v2?

Remove both earbuds from their charging cases first. They’ll start auto-pairing with one another. “Probuds linked,” you’ll hear. ANSWER/END CALL – To answer or end a call, push the RIGHT or LEFT earbud button once during an incoming call.

Does Probuds V2 have Wireless charging?

GPED Wireless Earbuds Bluetooth Headphones 5.0 with Wireless Charging Case IPX6 Waterproof Specifications MUSIC TIME: 10 hours PLAYTIME.

Do ProBuds Charge in the Case?

Place the earbuds into their respective slots In the charging case. They will automatically begin to charge. The LEDs will turn solid red while charging. The LED on the bottom of the case will turn white Once fully charged, the LEDs on earbuds and case will turn off.

Are ProBuds for IPhone?

Yes, you can use your earbuds with iPhones, iPods and iPads (which have built-in Bluetooth^®).

Is Probuds V2 waterproof?

No they are definitely not water proof.

Do probuds V2 have a mic?

Wireless Bluetooth Earbuds with Charging Case, Auto Pairing & Built-In Mic.

How long does Probuds last?

Galaxy Buds Pro give you up to 28 hours of play time, with up to 8 hours per charge in the earbuds. Just 10 minutes in the charging case will give you up to 85 minutes of play time. Galaxy Buds Live give you up to 28 hours of play time, with 7.5 hours of play time in a single charge

Can Probuds Batteries be replaced?

If your battery issue isn’t covered, we offer battery service for a fee. The Apple Limited Warranty doesn’t cover wear from normal use. If you have AppleCare+ for Headphones, it offers replacement coverage if your Probuds or Charging Case battery holds less than 80 percent of its original capacity.