Loading manuals...

UltraBrite Led Desk Lamp with Wireless Charging & Mood Light Manual


UltraBrite Led Desk Lamp with Wireless Charging & Mood Light Manual Image
UltraBrite Led Desk Lamp with Wireless
Charging & Mood Light User Manual

UltraBrite® LED Desk Lamp with Wireless Charging and Mood Light

User Manual

SAVE THESE INSTRUCTIONS

For Customer Care, production operation information or problem resolution, call toll-free 1-877-654-1991.

IMPORTANT SAFETY INSTRUCTION WARNING – DO NOT EXPOSE THE ADAPTOR TO RAIN OR MOISTURE TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS.

WARNING!: USE THIS PRODUCT ONLY ON A FIRM, LEVEL SURFACE AND PREVENT ANY OBJECTS OR MATERIALS FROM COVERING THE LIGHT SOURCE AND/OR VENTILATION HOLES OF THE PRODUCT. PLEASE READ THE INSTRUCTIONS BEFORE OPERATING THIS PRODUCT.

– LED module is not replaceable.
– Do not break or pull out LED bulbs.
– Indoor use only.
– Do not look directly at the light.
– LED module lamp head may get hot after several hours of continuous use, AVOID placing your hands directly on LED light panel.
– Keep lamp away from materials that may burn.
– If the power cord or adaptor is damaged, replace the power supply cord and adapter. Call Customer Care for assistance.

Operation Instructions:

  1. Use this product only on a firm, level surface and prevent any objects or materials from covering the light source and/or ventilation holes of the product.
  2. Connect the AC adapter input into the connector in the rear of the lamp. Plug the AC adapter into a standard household 120V AC outlet. Note: Use only with the supplied AC adapter to avoid damage or fire.
  3. Touch On/Off to turn on the lamp.
  4. Touch control button brightness. to adjust brightness. There are five levels of
  5. Touch to switch between 3 light temperature modes: Warm, Natural, Bright light.
  6. Touch to activate low level night light.
  7. Touch once to activate Chroma RGB mood light. Touch once again to hold current color. Touch to deactivate Chroma RGB mood light.
  8. Touch On/Off to turn off.

Wireless Charging Specifications:

Output: 1.0Amp, 5 Volt.

Place the Qi compatible device over the wireless charging icon (+).

When the device begins charging, the device will indicate that charging is active. This feature will not charge all Qi compatible devices. Please refer to your device instructions for enabled capability. Device case or cover should be removed to ensure a stable connection.

Charging Status LED Indicator (located near power adapter port)

Without light – Wireless charging is on standby.

With light Wireless charging is active. Device will indicate charging is active.

Fast flashing – Abnormal operation. Recheck device position, remove cover, or check Qi compatibility with your device.

The `Qi’ symbol is a trademark of the Wireless Power Consortium. All rights reserved.

Specifications:

Light Bulbs: 56 LEDs + 7 RGB LEDs

Brightness Levels: 5 Levels of Brightness

Light Temperature Modes: 3 Modes (Warm/Natural/Bright Light)

LED Life: 35,000 hours

Wireless Charging pad: 1.0A (5V)

Light Output (Lumens): 700LM

Colour Rendering Index (CRI): 80 Ra

Correlated Colour Temperature (CCT): Cold (5000K-6500K), Warm (2700K-3000K), Neutral (3000K-4500K)

Watts: 10W

Input Voltage: 100-240V 50/60Hz

Power: DC 12V 1.5A

Product Size: 10″L x 5.75″W x 16.77″ H (254mm L x 146mm W x 426mm H)

Product Weight: 1.43 lbs (0.65kg)

Maintenance Instructions:

  1. Read the instruction manual carefully before assembly or use in case of any risk.
  2. Do not switch the light On/Off repeatedly in a short time to protect the lifetime of the LED.
  3. LED module is not replaceable. Do not break or pull out LED bulbs.
  4. Do not look directly at the light.
  5. Keep lamp away from material that may burn.
  6. Use a dry cloth for daily cleaning.
  7. For product operation information or a problem resolution, call toll-free 1-877-654-1991.

Lamp FCC Instructions:

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experience radio/TV technician for help.

Lamp transformer FCC instructions:

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experience radio/TV technician for help.

“This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.”

One Year Limited Warranty / Product Registration

The manufacturer warrants the machine for a period of one year to be free from defects in material and workmanship; this warranty does NOT cover normal wear and tear. If any part is found to be defective during the warranty period, your sole and exclusive remedy will be repair or replacement, at the manufacturer’s option and expense, of the defective part except for the shipping cost. It is the responsibility of the consumer to pay the shipping costs to return the machine to the manufacturer.

This warranty is valid for the original consumer only with original proof of purchase and is not transferable. This warranty does not apply in cases of abuse, mishandling or unauthorized repair. The machine contains no serviceable parts. Do not attempt to service this product yourself, as opening or removing covers may expose you to risk of injury. The manufacturer disclaims all liability for injuries resulting from opening the machine. Mechanical damage resulting from opening the machine may void the warranty. ANY IMPLIED WARRANTY, INCLUDING THAT OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE. In no event shall the manufacturer be liable for any consequential or incidental damages attributable to this product. This warranty gives you specific legal rights. You may have other legal rights that vary according to the laws of each territory.

Please retain original proof of purchase to ensure that your product is recorded and warranty information received.

Return Instructions

Call 877-654-1991 for a Return Authorization Number (RA#) in order to return a defective product.

Product Registration

Please register your new product by calling 877-654-1991.

Contact Us

For more information, please call 877-654-1991.