Loading manuals...

VAPORESSO Gen S Starter Kit Manual


VAPORESSO Gen S Starter Kit Manual Image

VAPORESSO Gen S Starter Kit

Thank you for choosing Vaporesso product. Please read this manual carefully before using to ensure best experience. If you require additional information or have any question about this product, please contact our local distributors or contact us through website: www.vaporesso.com

GEN S with NRG-S TANK with AXON chip inside.

SPECIFICATION

MOD

  • Dimensions: 93.5 x 53 x 27 mm
  • Net weight: 107g
  • Output wattage: 5-220W
  • Resistance: 0.03~5.0
  • Battery: 2×18650 (Not Included)
  • Charging current: 2.5A
  • Display: 0.91′ OLED screen
  • Software version: AXON
  • Battery com patibility: 510

Tank- 8ml
Dimensions: ø30 x 56mm
Coil:
GT MESHED coil (pre-installed) (0.18, 50-85W, best: 65-80W)
GT4 MESHED coil (in box) (0.15, 50-75W, best: 60-70W)

Tank-2ml
Dimensions: ø22 x 56mm
Coil:
GT MESHED coil (pre-installed) (0.18, 50-85W, best: 65-80W)
GT4 MESHED coil (in box) (0.15, 50-75W, best: 60-70W)

HOW TO START

Step 1: Filling and install tank.

Push the top cap according to the arrow direction and fill e-liquid througn the oil hole.

Step 2: Power on the devices

1) Press the fire button 5 times in 2s: Power on and off.

2) 3 continuously pressing on fire button to lock and unlock the up, down and mode button.

3) 3 continuously pressing on mode button to unlock the mode button.

4) When install a tank, it will automatic identify its coil material and resistance, press up (+) button for reset, down (-) button to use existing setting.

Step 3: Choose your mode

PUL: PULSE mode (default), continuously boost flavor with large cloud.

ECO: POWER ECO mode, let you have longer battery life.

STC: SMART Temperature Control mode, automatic recognize coil material, just one step to complete setting.

DIY: DIY mode, you can choose traditional VW (H,N,S), VV, VT, CCW, BP (bypass mode), SP ( super player mode) from this section.

SET: System setting, including puff counter, brightness, 1flip screen, default, version.

SMART FUNCTION

  • When coil resistance extremely low, it will automatically provide you an option to go to SP (super player) mode.
  • When your battery is lower than 40%, it will automatically provide an option to go to ECO(Power ECO) mode.
  • When you install the tank with temperature heating wire(SS, Ti, Ni), it will automatically provide an option to go to STC(Smart TC) mode.

OPTIONS IN DIY MODE

  • VW-H /VW-N /VW-S (Variable Wattage mode – high/normal/soft): it will automatically select the adequate average wattage for your atomizer if you switch between different ohms resistances.
  • VT-SS/VT-NI/VT-TI : Variable temperature control mode for Stainless Steel/Nickel/Titanium material.
  • VV(Variable Voltage mode): You can manually adjust the voltage to match the resistances of the coil you use, the higher resistance of the coil you use, the higher voltage it requires correspondingly.
  • CCW (Custom Curve of Wattage mode): To use the up and down buttons to customize your own curve of wattage output line, move to the next bar with a quick press on the fire button, press the mode button to save and exit when setting is done.
  • BP (Bypass mode): Direct output voltage mode depends on battery level, supported coil resistance range is 0.05-5ohm.
  • SP (Super Player mode): In this mode, it will support broader resistance range from 0.030 to 50, which is adaptive to mainstream RDA tanks.

CAUTIONS

  1. Please turn off the device when it is not in use.
  2. Do not leave the charging device unattended.
  3. Do not drop, throw or abuse your device, it may cause damage.
  4. Please use a standard USB output charger in proper char,ging Current and Voltage range.
  5. Keep away from water or any flammable gas, liquid .
  6. Do not exposure to direct sunlight, dust, moisture or mechanical shock.
  7. Do not exposure the device to extreme temperature. (Applicable temperature range: -10~60 °C /14~140 °F while using, 0~+55°( /32-131 °F while charging, -10~45°( /14~113 °F while storing).
  8. EEE Recycling: the product should not be treated as household waste, instead it should be handed over to the applicable collection point for the recycling of electrical and electronic equipment.
  9. Battery Recycling: the product battery should not be treated as household waste, instead it should be handed over to the applicable used battery collection point for recycling.
  10. Only have your device repaired by Vaporesso. Do not attempt to repair it by yourself as damage or personal injury may occur.

This refillable electronic cigarette is intended for use with compatible liquid, which may contain nicotine. Nicotine is an addict ive substance and its use is not recommended for use by the following:
– Non smokers or persons under the legal smoking age
– Pregnant or breastfeeding women
– Persons experiencing heart disease, stomach or duodenal ulcers, liver or kidney problems, long-term throat disease or difficulty breathing due to bronchitis, emphysema or asthma
– Persons with an overactive thyroid gland or experiencing phaeochromocytoma (a tumour of the adrenal gland that can affect blood pressure)
– Those taking the medications Theophylline, Ropinirole or Clozapone

You may experience the following side effects if you use nicotine containing e liquid in combination with this product. If this happens, please consult a healthcare professional and show them this leaflet if possible:
– Feeling faint – Nausea – Dizziness – Headache – Coughing – Irritation of the mouth or throat
– Stomach discomfort – Hiccups – Nasal congestion – Vomition
– Chest palpitations/pain or an irregular heart rate

This device should not be used by persons under the age of 18 or non-smokers.


More Manuals From VAPORESSO