XBOX 360 Wireless Controller User Manual

Xbox 360 Wireless Controller

Thanks for choosing the Xbox 360 Wireless Controller. Your wireless controller lets you experience the ultimate in wireless freedom with the same precision, speed, and accuracy as a wired controller. The Xbox 360 Wireless Controller features:

• 2.4-GHz wireless technology with
  30-foot range.
• Integrated headset port.
• Adjustable vibration feedback for longer battery life.

The Xbox 360 Wireless Controller works exclusively with the Xbox 360™ video game and entertainment system. For information about using the Xbox 360 Wireless Controller with a particular game, see your game manual.
To enhance your experience with the wireless controller, try the Xbox 360 Rechargeable Battery Pack and the Xbox 360 Play & Charge Kit (sold separately). If you’re looking to expand your wireless experience, consider the Xbox 360 Universal Media Remote and the Xbox 360 Wireless Networking Adapter (sold separately).

Before using this product, read this manual and the Xbox 360 console manuals for important safety and health information. Keep all manuals for future reference. For replacement manuals, go to www.xbox.com/support or call Xbox Customer Support (see ”If You Need More Help”).

The limited warranty covering this product is contained in the Xbox 360 Warranty manual (Volume 2).
Dispose of this product in accordance with local and national disposal regulations (if any), including those governing the recovery and recycling of waste electrical and electronic equipment (WEEE).
Clean only with a dry or slightly damp cloth. Using cleaning solutions or attempting to clean connectors may damage your controller

Improper use of batteries may result in battery fluid leakage, overheating, or explosion. Risk of fire if batteries are replaced by an incorrect type. Released battery fluid is corrosive and may be toxic. It can cause skin and eye burns, and is harmful if swallowed. To reduce the risk of injury:

• Keep batteries out of reach of children.
• Do not heat, open, puncture, mutilate or dispose of batteries in fire.
• Use only alkaline batteries, type AA (LR6).
• Do not mix new and old batteries or batteries.
• Remove the batteries if they are worn out or before putting away your controller or remote control for an extended period of time. For the wireless controller, do not
  leave batteries in the AA battery holder when it is not installed in the controller.
• If a battery leaks, remove all batteries, taking care to prevent the leaked fluid from touching your skin or clothes. If fluid from the battery comes in contact with skin or clothes, immediately wash the skin with water. Before inserting new batteries, thoroughly clean the battery compartment with a damp paper towel, or follow the battery manufacturer’s cleaning recommendations.
• Dispose of batteries in accordance with local and national disposal regulations, including those governing the recovery and recycling of waste electrical and electronic equipment (WEEE).

SET UP YOUR XBOX 360 WIRELESS CONTROLLER

Before you can use your Xbox 360 Wireless Controller with your Xbox 360 console, you need to:

1. Insert a battery pack. The wireless controller only uses AA disposable batteries in the AA battery pack (provided) or the Microsoft Xbox 360 Rechargeable Battery Pack (sold separately).
2. Introduce the controller to the console by wirelessly connecting the two. NOTE The

1. Xbox 360 Wireless Controller only works within 33 feet (10 meters) of the console. Objects between the controller and the console can reduce this range.
   Insert Batteries
   To insert batteries into the wireless controller AA battery pack:Press the tab on the top of the AA battery pack and pull down to detach it from the controller.
2. Insert two new AA (LR6) batteries with their positive (+) and negative (–) ends positioned as shown on the underside of the battery pack. For best performance, AA rechargeable batteries are not recommended.
3. Slide the AA battery pack back into place on the controller and push in to lock.

NOTE
To avoid pinching your fingers when inserting, push only on the flat surface of the battery pack.

Before boarding any aircraft or packing the wireless controller in luggage that will be checked in, remove any batteries from the wireless controller. The wireless controller can transmit radio frequency (RF) energy, much like a cellular telephone, whenever batteries are installed.

Connect Your Controller

Up to four controllers, wired and wireless, can be actively connected to a console at one time. Each connected controller gets a quadrant on the Ring of Light. Before you can connect a wireless controller, at least one quadrant must be free (not lit). To disconnect a controller, remove the battery pack from a connected wireless controller or disconnect a wired controller cable connector.

To connect your wireless controller to your console:

1. Press the Xbox Guide button to turn on the controller.
   
2. Press the power button to turn on the console.
   
3. Press the connect button on the console.
   
4. Press the connect button on the controller
   
5. After the Ring of Light on the controller and console spin and flash once, the controller is connected. The quadrant that stays on indicates the controller’s position.

NOTES

• When you turn off your console, your controller will still be connected the next time you turn it on.
• Your controller is only connected to one console at a time. You can connect to a new console at any time, but your connection to the previously connected console will be lost.
• The Xbox 360 Wireless Controller only works within 33 feet (10 meters) of the console. Objects between the controller and the console can reduce this range.

USING YOUR CONTROLLER

The Xbox Guide Button
Your controller is equipped with a button in its centre called the Xbox Guide button. Press the Xbox Guide button to turn on your console or to go to the Xbox Guide if the console is already on. See your Xbox 360 Setup manual for more details about the Xbox Guide button.

The Ring of Light

The Xbox Guide button is surrounded by the Ring of Light, which is divided into four quadrants. When a controller is connected to your console, it is assigned a quadrant, which glows to indicate the controller’s position.

Turn on Your Xbox 360 Console

To turn on your Xbox 360 console, press Start or the Xbox Guide button on any connected controller, wired or wireless.

Use Your Controller in Games

For information about using your controller with a particular game, please see your game manual.

Use the Expansion Port

The expansion port on your controller lets you connect expansion devices like the Xbox 360 Headset (sold separately) to your controller. The port features a 2.5mm audio connector. For further information, please see the instruction manual for your controller expansion device.

Extended exposure to high volumes when using a headset may result in temporary or permanent hearing loss. Some unapproved third-party headsets may produce higher sound levels than an approved Xbox 360 Headset.

Use the Charge Port

Your wireless controller is equipped with a charge port on the front of the controller. The charge port works exclusively with the Xbox 360 Play & Charge Kit (sold separately).

TROUBLESHOOTING

If you encounter problems, try the possible solutions indicated below.

Lights Spin for Longer than 15 Seconds When Connecting

• Move the controller closer to the console.
• Make sure the batteries are in good shape.
• Keep the console and controller at least three feet away from large metal objects, such as file cabinets, mirrors, and refrigerators.
• Make sure that the front of the console is positioned in the direction of the controller.
• Cordless phones (2.4 GHz), wireless LANs, wireless video transmitters, microwave ovens, some mobile/cell phones, and Bluetooth headsets can interfere with the operation of the controller. Turn these off or unplug them and try reconnecting them.
• If nothing else works, turn off your console, remove and reinsert the AA battery pack into the controller, and then repeat the steps given in “Connect Your Controller.”

Stealth 700 Gen 2 Xbox

PACKAGE CONTENTS

1. Stealth 700 Gen 2 Xbox Headset (A)
2. USB-C Charging Cable (B)

IMPORTANT
Please make sure your headset is updated with the latest firmware.

HEADSET CONTROLS

1. USB Charge & Update Port
2. LED Indicator
   See legend
3. Connect Button
4. Bluetooth Multi-Function Button
   See Bluetooth Setup
5. Power Button
   Press (2s) – Power On/Off
6. Mode Button
   Default Function: Superhuman Hearing On/Off. Remappable in mobile app.
7. Mappable Wheel
   Default Function: Chat Volume Wheel. Remappable in mobile app.
8. Game Volume Dial

Use Superhuman Hearing Mode to pinpoint quiet audio cues like enemy footsteps and weapon reloads.
During gameplay, you can activate and deactivate Superhuman Hearing by pressing the Mode button once, quickly.

Mic Mute

Flip up Mic to mute. There is an audible tone when the mic is muted (high low) or unmuted (low high).

EQ Presets

EQ Presets are available through the Turtle Beach Audio Hub mobile app. The EQ Presets include the following:

1. Signature Sound
2. Bass Boost
3. Bass + Treble Boost
4. Vocal Boost

CHARGING

The Stealth 700 Gen 2 Xbox headset gives you 20 hours of rechargeable battery life. Make sure to charge it regularly, and before storing.

Headset Storage

Always charge your headset before storing it for any extended period of time (greater than 3 months). Never store the unit in temperatures above 113°F/45°C.

SETUP FOR XBOX

1. Press and hold the Power button on the headset to power the headset on.

2. Press the Enroll button on the console. Then, press and hold the Connect button on the headset. Both LEDs should start to flash rapidly.

3. Within a few seconds, the LEDs on both the headset and console will turn solid, indicating that pairing was successful.

SURROUND SOUND SETUP (AVAILABLE ONLY ON XBOX)

1.  Go to Settings >> General >> Volume & Audio Output
2. Set Headset Audio to Windows Sonic For Headphones

BLUETOOTH PAIRING

Your Stealth 700 Gen 2 will enter Bluetooth pairing mode once powered on. If no Bluetooth connection is made within 2 minutes, Bluetooth pairing mode will stop. To put your headset into Bluetooth pairing mode, follow these steps:

1. Hold down the Bluetooth button on your headset until the “Bluetooth Pairing” prompt plays.
2. Select the headset in your phone or tablet’s Bluetooth settings. The headset and device will pair via Bluetooth

Activate Voice Recognition (if available) (When Not In A Call) Press and Hold

LED INDICATORS

MAPPABLE BUTTONS

The Mode Button and Mappable Wheel can be assigned to a new function based on your gaming style.
To change the button’s assignment, follow these steps:

1. Download the Turtle Beach Audio Hub mobile app on your iOS or Android device.
2. Enable Bluetooth on your selected device, and pair with your headset to access the app.
3. Swipe to the second settings screen to assign new functions.
4. . Once selected, your headset will save this configuration.

SETUP FOR PC USE

SYNCING YOUR HEADSET (XBOX WIRELESS ADAPTER)
* *Xbox Wireless Adapter not included

1. Plug the Xbox Wireless Adapter into a free USB port on the computer.

Then, power the headset on by pressing and holding the Power button down.

2. Press and hold the Enroll button on the Adapter until the LED on the Adapter flashes. Then, press and hold the Connect button on the headset until the LED on the headset flashes.

3. Within a few seconds, the LEDs on both the headset and the Adapter will turn solid, indicating the headset and Adapter have been successfully synced.

Volume is controlled through Windows and the headset. For more information on how to control your volume when using the headset with a PC.

PLEASE NOTE: The Xbox Wireless Adapter is not included with the headset purchase, and is sold separately.

SYNCING YOUR HEADSET

1. On your PC, go to Settings >> Devices >> Connected Devices
2. Choose Add Bluetooth Or Other Device. Windows searches for the headset. Select Everything Else.
3. Press the Connect button on your headset. Windows finds and adds the headset.
4. When your Stealth 700 Gen 2 headset appears in the list under Other Devices, it is ready to use.

CONFIGURING YOUR SETTINGS

1. On the Windows Taskbar, right click the Speaker icon and select Playback Devices

• Set Turtle Beach Stealth 700 Gen 2 as your Default Device
• Select Recording Devices
• Set Turtle Beach Stealth 700 Gen 2 as your Default Device

PC SETUP

SYNCING YOUR HEADSET (XBOX WIRELESS ADAPTER)** **Xbox Wireless Adapter not included**

• Headset Volume is controlled through Windows when used on a PC.
• Volume controls on the headset have no effect.

1. On your PC, go to Settings >> Devices >> Connected Devices.
2. Choose “Add Device”. Windows searches for the headset.
3. Press the Connect Button on your headset. Windows finds and adds the headset.
4.  When your Stealth 700 headset appears in the list under Other Devices, it is ready to use.
5. Configure your Settings:
6. On the Windows Taskbar, right-click the Speaker icon.

• Select Playback Devices.
• Set Turtle Beach 700 as your Default Device.
• Select Recording Devices
• Set Turtle Beach 700 as your Default Device.

CHARGING

The Stealth 700 for Xbox One uses a rechargeable battery. Make sure to charge it regularly.
Headset Storage Always charge your headset before storing it for any extended period of time (greater than 3 months). Never store the unit in temperatures above 113°F/45°C.

• Stealth_700_for_Xbox_QSG.pdf (3 MB)