Loading manuals...

Portable printer XPrint Manual

Portable printer XPrint Manual Image

Portable printer XPrint


Install the APP

Scan the QR code, or download from the App store and download the mobile app XPrint ™.

Turn on printer

Press and hold the power button to turn on the printer.

For transportation safety, the battery is not fully charged. After turning on, you need to charge the device, according to prompts in the mobile application.

To charge, connect the Micro USB cable to the power source, and plug it into recharging slot on the back of the printer.
When fully charged, the charging indicator will glow green.
Charge approximately 1 hour *, using the charger 5В⎓2А 10W.
* Data obtained under laboratory conditions, depending on your conditions, the charging time may be different.

Connect to printer

If you can not connect to the printer, make sure that the NFC module of the mobile phone is in the zone above the XPRINT logo and try again.

NFC reading zone

  1. Go to your mobile phone settings, turn on Bluetooth.
  2. Update the list of Bluetooth devices, select
  3. Confirm pairing to complete the connection

Start printing, using mobile APP!

  • To save battery power, the printer will automatically turn off after 10 minutes in standby mode.
  •  The photo will go in and out 5 times, for printing in separate colors and lamination. Do not pull paper out of the printer until a message appears in the mobile application, that the printing is complete.
    Do not reuse photo paper. Reuse may damage the mechanism.
  • As a gift to the device is a removable tray for printing with 9 sheets of photo paper.

Main Parameters

Name Portable printer XPrint™
Model DMP 100
Weight 268 g (w/o packaging )
Input voltage 5V⎓2А
Connection method Bluetooth
Printing method Sublimation printing
Printing dimensions 2*3 inch (54*86 mm)
Image forma JPEG, PNG

Name and content of harmful substances in the product

Name of component Harmful substances
(Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE)
Circuit board
This table is created according to the provisions of the standard GB/T 26572.

○: the content of harmful substance in all homogeneous materials of the component is within the requirements of the standard GB / T 26572.

×: at least one of the homogeneous materials of the component exceeds the limits of the requirements of the standard GB / T 26572.


Changing of printing tray

  1. Open the print-cartridge door bay;
  2. Obtain a used removable print cartridge;
  3. Insert a new removable print cartridge.

    Do not open the removable print cartridge and do not reuse a photo paper
  4. Close the door of the removable print cartridge compartment.

Statuses of indicator

Power/Fault indicator

Not light up Device is off
Lights white Device is on
Slowly blinks white Device upgrades / Heating continues / Cooling continues
Quickly blinks white Printing
Quickly blinks red Printer fault Fix the problem, according to the tips in the mobile application

Bluetooth Indicator

Quickly blinks blue Waiting for connection
Lights blue Connected

Charging indicator

Lights green Fully charged
Lights red Charging


  1. Recommended ambient temperature when using: – 5 ° C ~ 35 ° C, avoid using the device in low and high temperatures;
  2. Recommended temperature during charging: 5 ° C ~ 35 ° C, avoid charging the device at low and high temperatures;
  3. Recommended image resolution from 1240 x 1864 and above.

For more information, please visit http://www.hannto.com/service or scan your QR code and sign in to our customer support account at WeChat.