TS100 Programmable Universal Tire Pressure Sensor
Product Information
Product Name: Xtool TS100 Programmable Universal Tire Pressure
Sensor
Web: www.xtooltech.com
Features:
- Metal Cycle Valve
- Replaceable and repairable TS100 tire sensor module
- Maximum pressure: 900 kPa
- Weight (excluding cycle valve): 13.8 g
- Boundary dimension: 46.4*25*16.2mm
Product Usage Instructions
Attention: Before using the Xtool TS100 tire
pressure sensor, you must use the Xtool tire pressure programming
device to program it first. It is recommended to finish programming
before installing the tires. When driving a vehicle equipped with
this type of tire pressure sensor, it is suggested to maintain a
vehicle driving speed of 240km/h.
Security Guidance:
- This warranty repair service is not applicable to the following
situations:- Product rig up error
- Misuse
- Product damage caused by crash or tire defect
- Product damage caused by racing or other unconventional
use - Exceeding the product’s specific using limit
Tire Pressure Sensor Replacement:
- Attention: Every time there is a tire repair
or disassembling, TS100 tire pressure sensor disassembling or
replacement, it is necessary to use the provided parts to replace
the rubber washer, washer, nut, and valve core to ensure proper
sealing. If there is external damage, the TS100 tire pressure
sensor must be replaced. The correct TS100 tire pressure sensor nut
torque is 4Nm.
Installation Guide:
- Loosen Tire: Take down the valve cap and valve
core, deflate the tire. Use a wind pressure shovel to strip the
tire rubber cover away from the rim. - Unload Tire: Clamp the tire on a tire changer,
adjust the cycle valve to be relative to the tire separated plug at
1 o’clock location, insert a tire tool and lift the tire bead on
installation plug to remove the tire bead.
Attention: Follow this beginning location
throughout the removal process. - Remove TS100 Tire Pressure Sensor: Remove the
valve cap, nut, and washer from the cycle valve rod, then remove
the TS100 tire pressure sensor module from the rim. - Install TS100 Tire Pressure Sensor and Cycle
Valve: Install the TS100 tire pressure sensor module onto
the rim and attach the cycle valve components. - Install Tire: Follow the tire machine
manufacturer’s instructions to install the tire onto the rim.
Attention: Before using the Xtool TS100 tire
pressure sensor, it must be programmed using the Xtool tire
pressure device. It is recommended to finish programming before
mounting the tires. When driving a vehicle equipped with this type
of tire pressure sensor, it is suggested to maintain a vehicle
driving speed of 210km/h.
Security Guidance:
- The TS100 tire sensor module is a replaceable and repairable
part of vehicles equipped with a factory-configured tire pressure
monitor system. - Before installation, make sure to use the Xtool tire pressure
sensor programming tool by selecting the specific vehicle series,
vehicle type, and the year of manufacture to program the TS100 tire
pressure sensor.
View Fullscreen
Web: www.xtooltech.com
Programmable Universal Tire Pressure Sensor
Metal Cycle Valve
Attention: Before using the Xtool TS100 tire pressure sensor, you must use Xtool tire pressure programming device to program first, we suggest finishing programming before installing tires. When driving the vehicle which is equipped with this type of tire pressure sensor, we suggest maintaining vehicle driving speed240km/h.
Security guidance
Before installing TS100 tire pressure sensor, please read this security instruction. For the reason of security and optimized operation, we suggest all of the maintaining and repairing work be operated only by trained personnel according to vehicle manufacturer’s guiding principle. Cycle valve is related to vehicle security parts, use only for professional installation, otherwise it may be result in TPMS tire pressure sensor damage. If error or incorrect installation occurs, Shenzhen Xtooltech Intelligent Co., Ltd do not undertake any responsibility.
Attention
TS100 tire sensor module is replaceable and repairable parts of vehicle which is equipped with tire pressure monitor system of factory configuration factory. Before installation, make sure using Xtool tire pressure sensor programming tool via selecting specific vehicle series, vehicle type and the year of manufacture to program TS100 tire pressure sensor. Please do not install TPMS tire pressure sensor into the broken tire which has been programmed. In order to guarantee optimum performance, please do not install cycle valve and parts which are not belong to Xtool on Xtool TS100 tire pressure sensor. After finishing installation, please test vehicle TPMS according to original vehicle manufacturer’s user guide steps to confirm correct installation.
Warranty repair
Shenzhen Xtooltech Intelligent Co., LtdcHereinafter referred to as “Company”) promise to all this product original retail buyers, since the day of delivery and under two years or under 40000 km, if in the case of normal use, this product or any parts is confirmed to exist material or the flaw of craft resulting in device breakdown, the company will repair or replace (new products or new parts) free of charge accordingly via proof of purchase. The company assume no responsibility for incidental damage or indirect damage caused by product misuse, improper operation or improper installation.
This warranty repair service is not applicable to these following situations: 1. Product rig up error. 2. Misuse. 3. Product damage caused by crash or tire defect. 4. Product damage caused by racing or other unconventional use. 5. Exceeding the product’s specific using limit.
TS100 tire pressure sensor detail sketch
Valve cap
Sensor subject Nut Cycle valve
Rubber sealing circle Valve core module
Retaining screw
TS100 tire pressure sensor technical parameters
TS100 tire pressure sensor weight Do not contain cycle valve
Boundary dimension
13.8 g About 46.4*25*16.2mm
Maximum pressure
900 kPa
Attention
Every time tire repair or disassembling, TS100 tire pressure sensor disassembling or replacement, must use our parts to replace rubber washer, washer, nut and valve core, make sure sealing well. If it is external damage, must replace TS100 tire pressure sensor. Correct TS100 tire pressure sensor nut torque: 4Nm.
Installation guide
Significance: Before installing TS100 tire pressure sensor, please read this instruction carefully, pay special attention to safety warning and announcements of this instruction. Please use TS100 tire pressure sensor correctly according to this instruction, otherwise it may be result in TS100 damage or personal injury, and make the warranty repair invalid.
1 Loosen tire Take down valve cap and valve core, deflate the tire. Use wind pressure shovel to strip tire rubber cover tire away from rim.
Attentionplease let the cycle valve via 180°face to wind pressure shovel.
2 Unload tire Clamp the tire on tire changer, adjust cycle valve to relative to tire separated plug 1 o’clock location, insert tire tool and lift the tire bead on installation plug to remove tire bead.
Attention: In the whole removal process must abide by this beginning location.
3 Remove TS100 tire pressure sensor
Remove the valve cap, nut, washer from cycle valve rod, then remove TS100 tire pressure sensor module from rim.
4 Install TS100 tire pressure sensor and cycle valve
Step1. Connect cycle valve and TS100 tire pressure sensor subject firmly. Attention: Make sure the parts are connected firmly. Step2. Remove the valve cap, nut and washer from cycle valve. Step3. Valve rod across the valve opening, let TS100 tire pressure sensor located in rim interior, assemble washer, nut on valve rod fist at last. Step4. Use 4.0 N·m torque screw up nut, then assemble bonnet back on valve rod. Step 1
Step 2
Step 3
Step 4
5 Install tire
Put tire on the rim, make sure the valve is facing the separation head at 180 ° angle on the rim.
Attention: Should abide by change tire machine manufacturer instruction to install tire on rim.
Web: www.xtooltech.com
Programmable Universal Tire Pressure Sensor
Attention: Before using Xtool TS100 tire pressure sensor must use Xtool tire pressure device to program, suggest finishing programming before tire mounting. When driving the vehicle which is equipped with this type of tire pressure sensor, we suggest maintaining vehicle driving speed210km/h.
Security guidance
Before installing TS100 tire pressure sensor, please read this security instruction. For the reason of security and optimized operation, we suggest all of the maintaining and repairing work be operated only by trained personnel according to vehicle manufacturer’s guiding principle. Cycle valve is related to vehicle security parts, use only for professional installation, otherwise it may be result in TPMS tire pressure sensor damage. If error or incorrect installation occurs, Shenzhen Xtooltech Intelligent Co., Ltd do not undertake any responsibility.
Attention
TS100 tire sensor module is replaceable and repairable parts of vehicle which is equipped with tire pressure monitor system of factory configuration factory.
Before installation, make sure using Xtool tire pressure sensor programming tool via selecting specific vehicle series, vehicle type and the year of manufacture to program TS100 tire pressure sensor.
Please do not install TPMS tire pressure sensor into the broken tire which has been programmed.
In order to guarantee optimum performance, please do not install cycle valve and parts which are not belong to Xtool on Xtool TS100 tire pressure sensor.
After finishing installation, please test vehicle TPMS according to original vehicle manufacturer’s user guide steps to confirm correct installation.
Warranty repair
Shenzhen Xtooltech Intelligent Co., LtdcHereinafter referred to as “Company”) promise to all this product original retail buyers, since the day of delivery and under two years or under 40000 km, if in the case of normal use, this product or any parts is confirmed to exist material or the flaw of craft resulting in device breakdown, the company will repair or replace (new products or new parts) free of charge accordingly via proof of purchase. The company assume no responsibility for incidental damage or indirect damage caused by product misuse, improper operation or improper installation.
This warranty repair service is not applicable to these following situations: 1. Product rig up error. 2. Misuse. 3. Product damage caused by crash or tire defect. 4. Product damage caused by racing or other unconventional use 5. Exceeding the product’s specific using limit.
TS100 tire pressure sensor detail sketch
Nut
Rubber valve rod Sensor subject Retaining
screw
TS100 tire pressure sensor detail sketch
Without cycle valve TS100 tire pressure sensor weight
Boundary dimension
13.8 g About 46.4*25*16.2mm
Maximum pressure
900 kPa
Attention
Every time tire repair or disassembling, TS100 tire pressure sensor disassembling or replacement, must use our parts to replace rubber washer, washer, nut and valve core, make sure sealing well. If it is external damage, must replace TS100 tire pressure sensor. Correct TS100 tire pressure sensor nut torque: 4Nm.
Installation guide
Significance: Before installing TS100 tire pressure sensor, please read this instruction carefully, please pay special attention to safety warning and announcements of this instruction. Please use TS100 tire pressure sensor correctly according to this instruction, otherwise it may be result in TS100 damage or personal injury, and make the warranty repair invalid.
1 Loosen tire Remove bonnet and core, and deflate the tire. Use bead loose actuator unload tire bead.
Attention: Lock washer must face to cycle valve.
2 Unload tire
Clamp the tire on tire changer, and it is relative to tire separated plug in to adjust cycle valve at 1 o’clock. Insert tire tool and lift tire bead on installation plug to unload tire bead.
Attention: In the whole removal process must abide by this beginning location.
3 Unload TS100 tire pressure sensor
Screw out the screw at the end of rubber valve rod, fetch the sensor subject carefully. Carve up rubber snap joint and connect a standard cycle valve extractor to rubber valve, according to pull the margin to unload cycle valve from valve clack.
4 Install TS100 tire pressure sensor and cycle valve
Step 1. Tighten the screws to connect the cycle valve and sensor subject firmly. Paint grease or lubricating oil on rubber valve rod. Step 2. Insert the valve rod into valve opening from rim interior, and connect a standard valve cycle extractor to the end of valve rod. Step 3. Pull the valve rod to stuck on the valve opening firmly, then assemble the bonnet back on valve rod.
Attention: cycle valve and margin opening should be concentric.
Step 1
Step 2
Step 3
5 Install tire Put the tire on the rim, make sure cycle valve via 180°face to separated plug. Install the tire on the rim.
Attention: Should use change tire machine manufacturer instruction to install tire on rim.