Introduction

Welcome to truly wireless audio with 25 hours * of combined battery life and wireless charging case.

Simple Pairing

1. Remove earbuds from case and remove protective cover from contacts. Place earbuds in charging case and allow 5 minutes to charge.
2. Open case and remove earbuds to initiate Bluetooth ® pairing.
3. On your device’s Bluetooth menu, select “IFROGZ Airtime Pro 2 SE.”

Touch Controls

Using the Earbuds

Airtime Pro 2 SE true wireless earbuds have built-in touch navigational controls. Just tap on the end of the earbud (on the IFROGZ logo) to navigate.

Turning Earbuds On/Off

To turn the earbuds on, simply remove the buds from the case. To turn the earbuds off, simply return them to the case.

The earbuds will go into hibernation mode if not used for 20 minutes.

Getting the Best Fit

To get the best sound out of your earbud, you need to have the right size ear tip to form a good seal. That’s why we provide different-sized tips.

If your ear tip feels loose, try a larger size. If you feel too much pressure, or if the ear tip doesn’t fit inside your ear, try a size smaller.

Note: each of your ears may require a different-sized tip.

To see if you’ve got a good seal, try the yawn test. Put in your earbuds and give a nice yawn; if your earbuds don’t wiggle and don’t break the seal, then you’ve got a good fit.

Charging the Wireless Earbuds

The case carries enough power to charge the earbuds up to 4 times * .

1. Place the earbuds in the charging case. You’ll feel them magnetically click into place.
2. A red light on the earbuds will indicate charging.

Charging the Case

Your case comes charged and ready to go. You can re-charge the case wirelessly using a wireless charging pad, or charge the case manually using the included USB-C ® cable.

Wireless Charging

1. Simply drop the charging case on a compatible wireless charging pad.
2.  The Battery Indicator lights on the front of the case will flash according to its current battery level. This indicates your case is charging. When the case is fully charged, all four lights will turn off.

Manual Charging

1. Connect the included USB-C charging cable to the port on the side of your case.
2. Connect the USB-A end of the cable to your preferred 5V USB outlet.
3. The Battery Indicator light will flash according to its current battery level. This indicates your case is charging. When the case is fully charged, all four lights will illuminate and then turn off.
4. Disconnect the charging cable.

Quick Charge Feature

Get one more hour of playtime by nesting the earbuds in the charging case for ten minutes.

Checking the Battery Level

Your case carries enough power to charge your wireless earbuds 4 times for a total of 25 hours. To check how much power your case still has, place the earbuds in the case. The LED on the front of the case will illuminate, indicating how much battery remains in the case:

” sizes=”(max-width: 247px) 100vw, 247px” alt=”Airtime Pro 2 SE Truly Wireless Earbuds – Checking the Battery Level” width=”247″ height=”344″ data-ezsrcset=”https://manuals.plus/wp-content/uploads/2021/01/Airtime-Pro-2-SE-Truly-Wireless-Earbuds-Checking-the-Battery-Level.jpg 247w,https://manuals.plus/wp-content/uploads/2021/01/Airtime-Pro-2-SE-Truly-Wireless-Earbuds-Checking-the-Battery-Level-215×300.jpg 215w” data-ezsrc=”https://manuals.plus/wp-content/uploads/2021/01/Airtime-Pro-2-SE-Truly-Wireless-Earbuds-Checking-the-Battery-Level.jpg” />

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS OR CHANGE TO THIS EQUIPMENT. SUCH MODIFICATIONS OR CHANGE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter

• Drivers: 6mm
• Resistance: 16 Ohms ± 15%
• Sensitivity: 100dB ± 3dB
• Frequency: 50Hz – 20KHz
• Working Time: 5+20hrs
• Charging Time: 1.5-2h

Warranty information available at www.zagg.com/warranty-policies
©2020 ZAGG Inc All Rights Reserved | NASDAQ: ZAGG | MADE IN CHINA

The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by ZAGG Inc is under license. USB-C is a trademark of USB Implementers Forum. Other trademarks are property of ZAGG.

*All hours usage and charging claims are estimates based on internal testing and will vary based on individual usage.

314-00849 | 07/15/20

Factory Reset

If you have functionality issues, a factory reset can help. Here’s how to perform one.

1. Place both buds in the case.
2.  Reset the right bud.
   • Remove the right bud from the case.
   • Tap and hold for 10 seconds until light flashes red and turns off.
   • Wait 10 seconds after red flashing light.
   • Tap and hold for five seconds until light turns on and flashes red and white.
   • Quickly tap the bud six times; the light will turn off.
   • Return the bud to the case.
3. Reset the left bud.
   • Repeat steps above, same as right bud.
4. Connect the left and right earbuds by removing them from the case and allowing them to connect to each other for about five seconds. Once connected to each other, earbuds will flash red and white indicating pairing mode. Remove the right bud from the case.
5. The earbuds are now reset to factory settings. You will need to remove the previous pairing from your device’s Bluetooth ® settings. Once removed, follow pairing instructions at the beginning of this quick start guide.

Having Trouble?

Our IFROGZ customer support team is available should you have any needs:

Online: www.support.zagg.com Or give us a call at: 1-800-700-9244

pro keys (2020)

Online Manual

Warranty Registration

Your ZAGG Pro Keys wireless keyboard and detachable case comes with a one-year manufacturer’s warranty. In order to activate the warranty, you must register your Pro Keys as well as keep your purchase receipt. If you purchased your Pro Keys from ZAGG.com, ZAGG has already registered it and has a copy of your proof of purchase.
Need more help? Please see our FAQ section at: www.zagg.com/faq

WARNING

See the important Health and Safety information on page 12 beforusing this product.

INSERTING YOUR DEVICE

1. 1. 1. Holding your device in landscape mode with the volume control buttons facing up, press the top half of your device into the case and apply light pressure to snap it snuggly into place.
      2. Press the bottom half of your device into the case and check each corner to make sure your device is seated properly.
         
      3. Once your device has been inserted into the case, attach the case to the keyboard by setting the case in one of the two cradles on the keyboard (above the keys).
      4. Place the top of the magnetized, foldable back flap against the top of the back of the case. You’ll feel it magnetically snap into place. This should create a triangular stand at the base of the flap that props up your tablet in the case.
      5. To detach the case from the keyboard, simply pull the magnetized back flap away from the case.
      6. To remove your device from the case, hold on to the top lip of the case and press against the back of the case. Then, grasp the exposed side of your device and lift/pull it away from the cover.

REMOVING YOUR DEVICE

1. 1. 1. To detach the case from the keyboard, simply pull the magnetized back flap away from the case.
      2. To remove your device from the case, hold on to the top lip of the case and press against the back of the case. Then, grasp the exposed side of your device and lift/pull it away from the cover.

POWERING ON AND OFF

1. 1. 1. To turn your Pro Keys on, press the Power button located at the top right corner of the keyboard. A green LED will light briefly.
      2. To turn your Pro Keys off, press and hold the Power button for three seconds. A red LED will flash indicating it has turned off.

PAIRING YOUR PRO KEYS

Your Pro Keys keyboard can pair with up to two devices at once. Pairing your Pro Keys is easy. Just follow these instructions.

1. 1. 1. Ensure your device’s Bluetooth® is on.
      2. Press and hold Pro Key’s Bluetooth 1 or 2 keys for three seconds. A blue LED on the Power button will begin pulsing, indicating your Pro Keys is in pairing mode.
      3. Your device will display “ZAGG Pro Keys” as an available pairing option. Select it and complete any other pairing steps based on your device.
      4. To pair your Pro Keys to another device, repeat steps 2 and 3. To toggle between devices, simple press 1 or 2.
      5. Once paired, the Blue LED on the power button will stop pulsing and fade to off. Once begun, if the Pro Keys doesn’t complete pairing after 60 seconds, it will abort the process. If this happens, repeat steps 2 and 3.

DISCONNECTING YOUR KEYBOARD

Your Pro Keys features a case that protects your device even when it’s not connected to your keyboard. When you’d like to use the case without the keyboard, there are three ways you can switch to your onscreen keyboard.

1. 1. 1. To activate your device’s keyboard once disconnected, press the Keyboard Hide/Show button.
      2. Turn off the Bluetooth® connection from your device.
      3. Turn your Pro Keys keyboard off.
         Removing the tablet in the case from the grooves above the keyboard will disconnect Bluetooth, and the virtual keyboard will appear on the iPad.

CHARGING YOUR KEYBOARD

Your Pro Keys features a case that protects your device even when it’s not connected to your keyboard. When you’d like to use the case without the keyboard, there are three ways you can switch to your onscreen keyboard.

1. 1. 1. Plug the Type-C connector into the charging port on the keyboard.
      2. Plug the regular USB connector into any 5V USB outlet. A red LED will light to indicate your keyboard is charging. This LED will turn off when your keyboard is fully charged.

Normal use is approximately one hour of use per day without the backlit feature. Using the backlit feature will impact battery life and require more frequent charging.

BATTERY LIFE

To check your Pro Keys’ battery life, press fn + the battery key. The LED light will flash one of the following three ways:

• 3 green flashes = 50% or more battery life
• 3 yellow flashes = 25-49% battery life
• 3 red flashes = less than 25% battery life

SPECIAL FUNCTION KEYS

Your Pro Keys keyboard has been designed with the following special function keys to give you more control of your device.

TROUBLE SHOOTING

If your device doesn’t respond to Pro Keys, there may be a simple explanation such as a dead battery or unsuccessful pairing. Please use the following to help troubleshoot your situation. If none of the following solve your issue, please contact ZAGG Customer Service and one of our trained professionals will be happy to assist you.

1. 1. 1. Restart your device.
      2. Turn your Pro Keys off and back on.
      3. Forget and re-pair your Pro Keys.
      4. If your Pro Keys does not establish or maintain a Bluetooth connection, reset the Bluetooth module by charging your keyboard.
      5. If, after charging, your keyboard doesn’t operate correctly, please contact ZAGG Customer Service.

For more help, please see our FAQ section at www.zagg.com/faq.
To reach a trained customer service representative, please use one of the following:
Zagg.com/support/contact.php | [email protected]
1-800-700-ZAGG [9244] | 00-1-801-839-3906 for international customers
For unparalleled scratch protection for your device, we recommend InvisibleShield® screen protection.

WARNING

Please read the precautions and operation information before using your keyboard or any accessories that accompany it. Retain this information for future use.

1. 1. 1. Take frequent breaks when using your keyboard. If you experience any discomfort, pain, tingling, numbness, or burning in your neck, shoulders, arms, wrists, hands, or any other part of the body, stop using your keyboard and consult a physician.
      2. Use only Type-C USB chargers in connection with your keyboard.
      3. Do not attempt to service your keyboard.
      4. Do not disassemble or attempt to disassemble your keyboard.
      5. Do not crush or puncture your keyboard.
      6. Do not immerse your keyboard in water.
      7. Do not put your keyboard in contact with water or other liquids as they could cause a short circuit, fire, or electric shock that could result in injury, death, or property damage.
      8. Do not use liquid or aerosol cleaners or solvents on or near your keyboard. Clean only with a soft, dry cloth. Disconnect any cords before cleaning the keyboard.
      9. Do not use your keyboard while operating a motorized vehicle, including automobile, boat, or airplane. Doing so could put you and others at risk of serious injury, death, or property damage.
      10. Do not use or place your keyboard near any heat sources including, but not limited to, radiators, heat registers, stoves, other appliances, campfires, or barbeque grills.
      11. To reduce the risk of fire or electric shock, wire or connect your keyboard to products only in the manner instructed in the documentation included herewith.
          Do not attempt to modify or adjust any ports. Any improper connections or adjustments may cause damage.
      12. When you are ready to discard your keyboard, recycle your keyboard in a manner consistent with electronic recycling requirements or recommendations in your geographic area.

©2020 ZAGG Inc All Rights Reserved
PATENTS: zagg.com/patents | NASDAQ: ZAGG | MADE IN CHINA
Apple and iPad Pro are trademarks of Apple Inc., registered in the U.S. and other countries.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by ZAGG Inc is under license. USB-C is a trademark of USB
Implementers Forum. Other trademarks and trade names are those of their respective owners.
ZAGG, InvisibleShield, and Pro Keys are trademarks of ZAGG Inc.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC CAUTION
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The product complies and is safe with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

pro keys with trackpad
Online manual

Warranty Registration
Your ZAGG Pro Keys with Trackpad comes with a one-year manufacturer’s warranty. In order to activate the warranty, you must register your Pro Keys with  Trackpad as well as keep your purchase receipt. If you purchased your Pro Keys with Trackpad from ZAGG.com, ZAGG has already registered it and has a copy of your proof of purchase. Need more help? Please see our FAQ section at: www.zagg.com/faq
WARNING See the important Health and Safety information on page 17 before using this product.

INSERTING YOUR DEVICE

1. Holding your device in landscape mode with the volume control buttons facing up, press the top half of your device into the case and apply light pressure to snap it snuggly into place.
2. Press the bottom half of your device into the case and check each corner to make sure your device is seated properly.

ATTACHING KEYBOARD AND CASE

1. The bottom rim of the case (in landscape position) magnetically attaches to the spine of the keyboard (above the keys).
2. The foldable flap on the keyboard folds into a triangular stand. Place the top of the foldable back flap against the top of the back of the case. You’ll feel it magnetically snap into place. The back flap attaches magnetically to three different points on the back of the case, allowing for three different angles.

REMOVING YOUR DEVICE

1. To detach the case from the keyboard, simply pull the magnetized back flap away from the case, and lift the case away from the keyboard..
2. To remove your device from the case, hold on to the top lip of the case and press against the back of the case. Then, grasp the exposed side of your device and lift/pull it away from the cover.

POWERING ON AND OFF

1. To turn your Pro Keys with Trackpad on, press the Power button located at the top right corner of the keyboard. A green LED will light briefly.
2. To turn your Pro Keys with Trackpad off, press and hold the Power button for three seconds. A red LED will flash indicating it has turned off.

PAIRING YOUR PRO KEYS WITH A TRACKPAD

Your Pro Keys keyboard can pair with up to two devices at once. Pairing your Pro Keys is easy. Just follow these instructions.

1. Ensure your device’s Bluetooth® is on.
2. Press and hold Pro Key’s Bluetooth 1 or 2 keys for three seconds. A blue LED on the Power button will begin pulsing, indicating your Pro Keys is in pairing mode.
3. Your device will display “ZAGG Pro Keys” as an available pairing option. Select it and complete any other pairing steps based on your device.
4. To pair your Pro Keys to another device, repeat steps 2 and 3. To toggle between devices, simple press 1 or 2.
5. Once paired, the Blue LED on the power button will stop pulsing and fade to off. Once begun, if the Pro Keys doesn’t complete pairing after 60 seconds, it will abort the process. If this happens, repeat steps 2 and 3.

DISCONNECTING YOUR KEYBOARD

Pro Keys with Trackpad features a case that protects your device even when it’s not connected to your keyboard. When you’d like to use the case without the keyboard, there are three ways you can switch to your onscreen keyboard.

1. To activate your device’s keyboard once disconnected, press the Keyboard Hide/Show button.
2. Turn off the Bluetooth® connection from your device.
3. Turn your Pro Keys keyboard off.

CHARGING YOUR KEYBOARD

Your Pro Keys features a powerful lithium polymer battery that lasts up to three months of normal use between charges.* To charge your Pro Keys, follow these steps:

1. Plug the USB Type-C® connector into the charging port on the keyboard. (Charging cable not included with Pro Keys with Trackpad for the iPad 10.9/11-inch.)
2. Plug the regular USB connector into any 5V USB outlet. A red LED will light to indicate your keyboard is charging. This LED will turn off when your keyboard is fully charged.
Normal use is approximately one hour of use per day without the backlit feature. Using the backlit feature will impact battery life and require more frequent charging.

BATTERY LIFE

To check your Pro Keys’ battery life, press fn + the battery key. The LED light will flash one of the following three ways:

• 3 green flashes = 50% or more battery life
• 3 yellow flashes = 25-49% battery life
• 3 red flashes = less than 25% battery life

USING THE TRACKPAD

The trackpad toggles on and off.
1. TURN ON: Press the Function key (fn) and the left arrow key simultaneously.
2. TURN OFF: Press the Function key and the left arrow key again.
Note: The trackpad automatically turns on each time the keyboard is turned on. If you turn the trackpad off while using your keyboard, then turn the keyboard off, the next time you turn on the keyboard, the trackpad will automatically turn itself on again. Simply press the Function key and the left cursor simultaneously to turn it off.
Cursor:
When you use the trackpad, a dot cursor will appear on your screen. The cursor operates through the keyboard’s trackpad, not your tablet.

Press with one finger until you feel a click.

Click and Hold: Press and hold with one finger.

Drag: Click and hold an item, then slide your finger across the trackpad to move it.

Scroll Up or Down: Swipe two fingers up or down. When two fingers swipe up, the screen scrolls down. When two fingers swipe down, the screen scrolls up.

Scroll Left or Right: Swipe two fingers left or right.

SPECIAL FUNCTION KEYS

Your Pro Keys with Trackpad has been designed with the following special function keys to give you more control of your device.

1 & 2 PAIRING – Activates your device’s pairing mode.
HOME – Displays your device’s home screen.
LOCK – Activates and deactivates your device’s sleep mode.
APPS RUNNING – Displays all of the apps currently running on your device.
LANGUAGE SYMBOL – Toggles between keyboard languages (if active on your device); also, pressing cmd + spacebar will do the same.
KEYBOARD HIDE/SHOW – Hides or shows your onscreen keyboard.
PREVIOUS TRACK – Skips to the previous track on your selected playlist.
PLAY/PAUSE – Starts or pauses your currently playlist.
NEXT TRACK – Skips to the next track on your current playlist.
MUTE – Mutes your device’s audio
VOLUME DOWN – Decreases your device’s volume.
VOLUME UP – Increases your device’s volume.
POWER – Turns your Pro Keys keyboard on and off.
BATTERY LEVEL – Indicates remaining battery life.
fn+ BACKLIGHT ON/OFF – Activates the backlight feature.
fn+ BACKLIGHT COLOR – Changes backlight colors. (7 possible)
fn+ TRACKPAD ON-OFF – Toggles trackpad on/off.

TROUBLESHOOTING

If your device doesn’t respond to Pro Keys, there may be a simple explanation such as a dead battery or unsuccessful pairing. Please use the following to help troubleshoot your situation. If none of the following solve your issue, please contact ZAGG Customer Service and one of our trained professionals will be happy to assist you.

1. Restart your device.
2. Turn your Pro Keys off and back on.
3. Forget and re-pair your Pro Keys.
4. If your Pro Keys does not establish or maintain a Bluetooth connection, reset the Bluetooth module by charging your keyboard.
5. If, after charging, your keyboard doesn’t operate correctly, please contact ZAGG Customer Service.
For more help, please see our FAQ section at www.zagg.com/faq.
To reach a trained customer service representative, please use one of the following: Zagg.com/support/contact.php | [email protected]
1-800-700-ZAGG [9244] | 00-1-801-839-3906 for international customers
For unparalleled scratch protection for your device, we recommend InvisibleShield® screen protection.

WARNING
Please read the precautions and operation information before using your keyboard or any accessories that accompany it. Retain this information for future use.

1. Take frequent breaks when using your keyboard. If you experience any discomfort, pain, tingling, numbness, or burning in your neck, shoulders, arms, wrists,  hands, or any other part of the body, stop using your keyboard and consult a physician.
2. Use only USB Type-C® chargers in connection with your keyboard.
3. Do not attempt to service your keyboard.
4. Do not disassemble or attempt to disassemble your keyboard.
5. Do not crush or puncture your keyboard.
6. Do not immerse your keyboard in water.
7. Do not put your keyboard in contact with water or other liquids as they could cause a short circuit, fire, or electric shock that could result in injury, death, or property damage.
8. Do not use liquid or aerosol cleaners or solvents on or near your keyboard. Clean only with a soft, dry cloth. Disconnect any cords before cleaning the keyboard.
9. Do not use your keyboard while operating a motorized vehicle, including an automobile, boat, or airplane. Doing so could put you and others at risk of serious injury, death, or property damage.
10. Do not use or place your keyboard near any heat sources including, but not limited to, radiators, heat registers, stoves, other appliances, campfires, or barbeque grills.
11. To reduce the risk of fire or electric shock, wire or connect your keyboard to products only in the manner instructed in the documentation included herewith.
Do not attempt to modify or adjust any ports. Any improper connections or adjustments may cause damage.
12. When you are ready to discard your keyboard, recycle your keyboard in a manner consistent with electronic recycling requirements or recommendations in your geographic area.

©2021 ZAGG Inc All Rights Reserved
PATENTS: zagg.com/patents | MADE IN CHINA
iPad is a trademark of Apple Inc., registered in the U.S. and other countries.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by ZAGG Inc is under license. USB Type-C is a trademark of USB Implementers Forum. Other trademarks and trade names are those of their respective owners. ZAGG, InvisibleShield, and Pro Keys are trademarks of ZAGG Inc.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,  and (2) this device must accept any interference received, including interference that may cause undesired operation.
FEDERAL COMMUNICATION COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined  by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC CAUTION
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. The product complies and is safe with the FCC portable RF  exposure limit set forth for an uncontrolled environment and is safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available.

ZAGG Messenger Folio Apple Keyboard

See the important Health and Safety information on page 6 before using this product.
WARRANTY REGISTRATION
Your ZAGG Messenger Folio™ comes with a one-year manufacturer’s warranty. In order to activate the warranty, you must register your Messenger Folio as well as keep your purchase receipt. If you purchased your Zagg Messenger Folio from Zagg.com, Zagg has already registered it and has a copy of your proof of purchase. To register your product, please go to www.Zagg.com/faq.

INSERTING/REMOVING YOUR DEVICE

To insert your iPad into the Messenger Folio™, align the edge of your tablet so it corresponds with the corner clips located on the inside of the cover. Gently slide the corners of your iPad into the guides. Secure your tablet by aligning its opposite edge with the corresponding lower guide. To remove, simply lift up from the lower guide and slide your iPad out.

POWERING ON AND OFF

To turn on your Messenger Folio, press the power key. A green LED on the battery key will briefly illuminate while the keyboard powers up. To turn your Messenger Folio off, press and hold the power key for three seconds. A red LED will flash, indicating your Messenger Folio has turned off.

PAIRING YOUR MESSENGER FOLIO

Pairing your Messenger Folio with your iPad is easy. It should only need to be paired once, using the following directions. If the connection between your tablet and Messenger Folio is ever lost, repeat these steps.

1. Access your iPad’s Bluetooth® settings.
2. Press and hold the Bluetooth key on the Messenger Folio for three seconds. A blue LED under the power key will flash until your Messenger Folio and iPad are paired.
3. Your iPad will display “ZAGG Messenger Folio” as an available device. Select this option to complete pairing.

CHARGING

Your Messenger Folio features a powerful lithium polymer battery that lasts for up to three months between charges*. It comes with a charging cable you can use to charge your keyboard quickly and conveniently. To charge your Messenger Folio, follow these steps:

1. Plug the micro USB connector into the charging port, located at the lower right corner.
2. Plug the regular USB connector into any USB outlet.
3. A red LED under the power key will illuminate to indicate your Messenger Folio is charging. Wait until this light turns off, indicating a full charge.
4. Remove the micro USB connector and enjoy your Messenger Folio for up to three months before you need to charge it again.
5. Normal use is approximately one hour of use per day.

BATTERY LIFE

As mentioned, the Messenger Folio features a powerful, rechargeable battery that lasts up to three months between charges. To check your Messenger Folio’s remaining battery power, press + (battery key). The LED indicator will flash one of three ways:

1. Three green flashes = full battery.
2. Three yellow flashes = approximately half battery.
3. Three red flashes = low battery. When your Messenger Folio reaches critical battery level, the LED will flash red once every five minutes.
4. To help preserve battery life, your Messenger Folio will enter sleep mode if left on and not used. To awaken your Messenger Folio, press any key. The Messenger Folio’s battery has no memory and may be charged whenever you wish.

SPECIAL FUNCTION KEYS

Your Messenger Folio Keyboard has been designed with the following special function keys to give you more control of your iPad:

Home – Displays your iPad’s home screen.
Lock – Activates and deactivates your iPad’s sleep mode.
Search – Opens your iPad’s search function.
Reverse – Track back.
Play/Pause – Starts or pauses your current playlist.
Forward – Track forward.
Lower Volume – Decreases your iPad’s volume.
Higher Volume – Increases your iPad’s volume.
Pairing – Activates your iPad’s pairing mode.
Power – Turns your Messenger Folio Keyboard on and off.
Battery Level – Indicates remaining battery life.
Multiple Language – Toggles between keyboard languages (if different keyboard language layouts have been selected in your iPad) also, pressing + Spacebar will do the same.

TROUBLESHOOTING

If your iPad does not respond to your Messenger Folio, there may be a simple explanation such as a dead battery or an unsuccessful pairing. Please use the following to help troubleshoot your situation. If none of the following solve your issue, then please contact Zagg Customer Service and one of our trained professionals will be happy to assist you.

1. Restart your iPad.
2. Turn your Messenger Folio off and back on. You should see the LED illuminate briefly — if not, charge your Messenger Folio.
3. After charging, turn your Messenger Folio on. If the LED does not illuminate, and your keyboard doesn’t operate correctly, please contact Zagg’s customer service.
4. If your Messenger Folio cannot establish or maintain a Bluetooth connection, reset the Bluetooth module by charging your keyboard.
5. Forget and re-pair your Messenger Folio.
6. Press the Bluetooth key on your Messenger Folio to activate the Bluetooth signal and watch for the LED to flash blue.
7. Your iPad should display “ZAGG Messenger Folio” as an available device. Select it.
8. If your iPad gives you an error message, repeat the pairing process.
9. For more help please see our FAQ section at: www.zagg.com/faq
   To reach a trained customer service representative, please use one of the following:

Zagg.com/support/contact.php | [email protected]
1-800-700-ZAGG [9244] | 00-1-801-839-3906 for international customers
For unparalleled screen and impact protection for your device, we recommend Zagg InvisibleShield® HDX – extreme impact screen protection.
©2015 Zagg Inc All Rights Reserved.
NASDAQ: ZAGG | MADE IN CHINA
Bluetooth® is a trademark of Bluetooth SIG, Inc.
Zagg®, InvisibleShield®, and Messenger Folio™ are trademarks of Zagg Inc. iPad is a trademark of Apple Inc., registered in the U.S. & other countries.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING:

Please read the precautions and operation information before using your keyboard or any accessories that accompany it. Retain this information for future use.

1. Health warning: Take frequent breaks when using your keyboard. If you experience any discomfort, pain, tingling, numbness, or burning in your neck, shoulders, arms, wrists, hands, or any other part of the body, stop using your keyboard and consult a physician.
2. Use only micro USB chargers in connection with your keyboard.
3. Do not attempt to service your keyboard.
4. Do not disassemble or attempt to disassemble your keyboard.
5. Do not crush or puncture the keyboard.
6. Do not immerse your keyboard in water.
7. Do not put your keyboard in contact with water or other liquids as they could cause a short circuit, fire, or electric shock which could result in serious injury, death, or property damage.
8. Do not use liquid, or aerosol cleaners, or solvents on or near your keyboard. Clean only with a soft, dry cloth. Disconnect any cords before cleaning the keyboard.
9. Do not use your keyboard while operating a motorized vehicle, including automobile, boat, or airplane. Doing so could put you and others at risk of serious injury, death, or property damage.
10. Do not use or place your keyboard near any heat sources including, but not limited to, radiators, heat registers, stoves, other appliances, campfires, or barbeque grills.
11. To reduce the risk of fire or electric shock, wire or connect your keyboard to products only in the manner instructed in the documentation supplied herewith. Do not attempt to modify or adjust any ports. Any improper connections or adjustments may cause damage.
12. When you are ready to discard your keyboard, recycle your keyboard in a manner consistent with electronic recycling requirements or recommendations in your geographic area.