Loading manuals...

ZELOTES F-35 Vertical Mouse Manual


ZELOTES F-35 Vertical Mouse Manual Image

Manufacturer: Shenzhen Master Electronic Technology Co., Ltd. Address:303J, 3/F, B Building, Times Plaza, Center City of Longcheng Street, Longgang District, Shenzhen City, Guangdong Province, P.R. China

Master Electronic Technology Co., Ltd. in Shenzhen. All rights reserved. ZELOTES is a trademark of Master Electronic Technology Co., Ltd.

Package Contents (attachment)

  • Mouse x1
  • Receiver x1
  • Instructions x1

System requirements

  • IBM or compatible computer
  • Windows:2000/ME/XP(x64)/Vista/7/8 Mac OS X(over V10.4)
  • An available USB port

Product Structure Diagram

Component function description

  1. Left button
  2. Right button
  3. Middle button
  4. DPI adjustment
  5. Forward button
  6. switch
  7. back
  8. lens
  9. receiver
  10. label
  11. mat

The blue light at the roller is on when charging the mouse and the light goes off when fully charged.

Specification

  • Button number:6 buttons
  • Tracking System: optical
  • Frequency: 2402.85MHz-2480.85MHz
  • Effective distance: 10m
  • Working voltage/current: 3.7V 4mA
  • Button life: 5 million times
  • Roller life: 1.2 million turn
  • Product dimensions: 110*72*75mm
  • Product weight: 105±5g
  • Resolution: 1000-1600-2400DPI
  • Rate of return: 250Hz

What to do if the mouse has no response?

  1. Please charge the mouse with a USB cable.
  2. Please try to replace the receiver with a USB interface.
  3. Make sure the power switch on the bottom of the mouse is “on” or in the position.
  4. Try to restart the computer.
  5. Press the left、middle、right keys when the power is on, and put the receiver into the computer, waiting for 5 seconds, and then you could rematch code successfully.
  6.  If it is still unsuccessful, please email to E-mail: [email protected] for technical assistance.

Trademark number: No.013426986
The device conforms to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) The device may not cause harmful interference, and (2) the device must accept any interference received, including interference that may cause undesired operation.
Precautions

  • Do not expose it to liquid
  • Do not disassemble it
  • Avoid dropping it
  • Avoid extremely high or low temperature

Declaration of Conformity
The product conforms to EC standards for radio interference. Here, Master Electronic Technology Co., Ltd. in Shenzhen announces that F-35 radio equipment conforms to the Directive 2014/53/EU. The full text of the EU Declaration of Compliance can be found on:
http://www.zelotes.cn/en/InfoPages_106.html
Maximum Output Power: dBm.
Frequency Range: 2.4g band (2402.85MHz-2480.85MHz)

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  •  Reorient or relocate the receiving antenna.
  •  Increase the separation between the equipment and receiver.
  •  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  •  Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions

  1. this device may not cause harmful interference, and
  2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.