saco Dishwasher BEKO DIN15210 Manual

The serviced apartment company

Operating Instructions – Dishwasher BEKO DIN15210

Control Panel

1. Programme Indicator Light
2. Tablet Detergent Indicator
3. Salt Level Indicator Light
4. Time Delay Indicator
5. Start / Stop Indicator Light
6. Start / Stop Button
7. Time Delay Button
8. Rinse Aid Indicator Light
9. Half Load Indicator Light
10. Half Load / Tablet Detergent Button
11. Programme Selection Button
12. On/Off Button

Selecting the correct program

Program number	1	Program 2	Table 3	4	6
Program name	Eco ‘	extensive	Clean&Shine	Quick&Clean	Mid 30
Cleaning temperature	50 °C	70 °C	65°C	70 °C	35 ‘V
Degree of Soiling	Most economical was h hg program for the medium soiled daily it he’s that are kept waiting.	Suitable br heavily soiled dishes, pots, and pans.	Daly wishing program br normally soiled dishes.	Daily was a hiring program at which the medium soiled dales that are kept smiling are deaned in the fastest way.	Suitable br lightly soiled daily dishes that are scraped or precleaned.
		High	Mk) Him	Medium	few
Detergents M25 cm’115 cm’ 8=5 cm’	i’‘,                  lc	A+B		MB
Prowash
Wash
Dry
Duration (min)	I ”  ‘	124	96	58
Water (I)	I d	17,6	10,6	11,8	H
Energy (kWh)	1,02	1.7	1,04	1,32

Operating the Dishwasher

• Load up the dishwasher, and insert the dishwasher tablet.
• Push in the on/off button and check that the program indicator lights come on.
• Check the salt and rinse aid level indicator lights before you start the machine. If necessary add salt and rinse aid.
• Select the required program by referring to the program chart.
• Select the desired program by using the Programme Selection Button.
• Press the start/stop button.
• Close the door then the program starts.
• An audio signal with an interval of 8 seconds warns you to switch your machine off when the selected program ends. This audio signal will warn you 10 times before it turns off.

WARNING! Do not open the dishwasher door whilst the appliance is in operation. However in case, the door is opened while the machine is working, then a safety mechanism ensures the machine immediately stops. The water may be very hot, so be careful!

• Care must be taken if opening the door, as steam and water will escape.
• Press the on/off button after the program is completed. The indicator lights will go off.
• Unload the baskets.

Helpful loading tips

• Place the most difficult to clean items on the bottom rack: pots, pans, lids, serving dishes, and bowls, as shown in the picture.
• Place serving dishes and lids on the sides of the racks in order to avoid blocking the rotation of the top spray arm.
• Use the cutlery grid for cutlery and face sharp objects down to avoid injury.
• Place lighter items on the upper basket.
• Place hollow items face down so they do not collect water.

How to cancel the washing program

To cancel a program while the machine is operating:

• Open the door
  WARNING! Care must be taken when opening the door, as steam will escape.
• Press and hold the start/stop button for 3 seconds.
  The start/stop indicator light will start flashing. Close the door.
• The machine will drain the water inside the machine for 45 seconds.
• The program is canceled when the start/stop indicator light goes off. Then, you can choose and start a new program.

NOTE: Depending on the stage of the program you have canceled, there may be detergent residue or rinse aid
inside the machine and on the load. Make sure the items in the dishwasher are not used before being washed
properly.

How to change the washing program

To change the program selection while the machine is operating:

• Open the door

WARNING! Care must be taken when opening the door, as steam will escape.

• Press the starts/stop button. The indicator light will go off.
• Select the new program. Press the start/stop button. The indicator light will be on and the new program will start.

NOTE: The new program will NOT start right from the beginning. It will start from the stage last carried out by the previous program selection.