Lintelek ID205G Smart Watch Manual

Smart Watch
User Manual
Thank you for purchasing our products, read the
User Manual carefully before use
Model Number: ID205G

Bind Watch

1. Download and install app
You can set up the watch through the VeryFitPro app for iOS or Android devices. The steps are shown as follows.

Notes: The hardware platform of the equipment system shall meet requirements.


iOS 8.0 version or above	Android 4.4 system or above	Support Bluetooth 4.2

Correct operation: Scan the QR code below or on
the watch or download “VeryFitPro”App through
the mobile App Store to pair with the watch

Wrong operation: Pair the watch directly with the Bluetooth in your mobile phone’s settings.

2. Bind process

Turn on the Buetocth and GPS on your mcbile phone. Find the binding request on the pull-down list on the home page of the APP.
Select product Model：ID205G
Click“Ok”to Complete binding

Notes:
* During binding process, VeryFitPro will prompt you to enable GPS and Bluetooth, and authorize VeryFitPro to get access to the GPS on you mobile phone.
* iPhones will not prompt you with any information unless you complete Bluetooth pairing on your ID205G watch in the built-in Bluetooth in you mobile phone after binding.

Synchronous Data

In daily wear, the watch can detect all kinds of exercise data. The user needs to connect the watch with bluetooth on the APP before synchronous operation. The detailed operations are shown as follows:

Open the mobile APP
>swipe down the page
> sync prompt appears

Notes!
* Please synchronize the data at least once within 7 days to avoid data loss at the watch end.
* The Apple phone also needs to be connected to the paired watch in the bluetooth setting interface of the mobile phone, so that the watch can be alerted. The steps are shown as follows:

Open the IOS phone >set>bluetooth>search and click pair

Instructions for use

1.Charging schematic
Connect and charge the watch according to the picture. It needs to be charged to activate the watch when it is started for the first time.2.Wear/install


Wear the device a finger’s distance from the wrist bone and adjust the tightness of the wristband to a comfortable position.	Flip the switch and take out the wristband

Tip: Wearing too loosely may affect the accuracy of heart rate data.

Operating Instructions

1.Definition of Key function

Short press the right key:
Return to previous interfaceLong press the right key: start

2. Watch dial switch

Replacing the dial interface will appear after long pressing the dial.

3. Main interface operation
Swipe the screen to enter different interfaces (interactive interface tile diagram)

Function Introduction

1.Icon function introduction

Enter the sports window, and choose different sports Modes. Change the sports mode on the APP.
Perform a heart rate test to check your heart rate data for the day.
Help you regulate your breathing and relax your mood.
View, turn off or turn on the alarm clock. You need to add an alarm clock On the mobile App.
Control music play on your mobile phone (watch cannot store music).
Have the timing and countdown function.
Record recent sports.

Notes: For more functions (sleeping) and operation, please check the VeryFitPro software of the mobile phone.

2.Start sports

Enter sports
Click the sports icon > select the sports type > enter the sports countdown automatically.
During sports
Pause sports: short press the right key.
Restore sports: short press the right key.
End sports
End sports: long press the right key > select the end button on the screen.

3.women’s health tracking

Display location in the data bar

Women’s health tracking function, which is used for recording menstrual changes, tracks individual menstrual cycle and predicts ovulation (it needs to be enabled on the APP).

Product Parameters

Model	ID205G	Screen type	1.3inch color screen
Battery ca^apacity	210 mAh	Charging voltage	5V^–±0.2V
Charging time	about 2.5 hours	Battery life	5-7 days
Waterproof level	5ATM	Weight of product	35g
Operating temperature	^–10^°C – 45°C	Bluetooth version	BLE 4.2
Product frequency	2402 – 2480MHz	Max. transmission power consumption	OdBm

Range of charging temperature: 10°C – 45°C
Battery life: Actual battery life and charging time will vary depending on usage and environment, etc.
Waterproof: Not suitable for diving, swimming in the sea or sauna, but suitable for swimming in the swimming pool or in the shower (cold watr) and shallow beach.

Cleaning and Maintenance

lt is recommended to wear and maintain according to the following three points:

Keep the product clean.
Keep the product dry.
Do not wear it too tight.

* Do not use household cleaners to clean the watch, but use the soap free detergent.
* It is recommended to use alcohol to scrub stains that are not easy to remove.

FAQ

Q1 . Mobile APP search for the watch failed
1) It is recommended to update VeryFitPro to the latest version.
2) It is recommended to close all programs, restart the Bluetooth, and then connect.
3) Confirm whether the mobile phone system meets Android 4.4 or IOS 8.0 or above.

Q2 . The watch received no alerts, text messages or phone calls
1) You need to turn on the smart reminder function and the call reminder switch in the APP, and synchronize to the watch.
2) The iphone needs to be paired with the watch via Bluetooth. (Please check the column of “Synchronous Data” for details)
3) You need to keep your watch connected to Bluetooth.

Q3 . Bluetooth is often disconnected
1) If the distance between the watch and the mobile phone is too far, the connection effect of more than 7m bluetooth is obviously weakened.
2) Whether there is a shield between the watch and the mobile phone, the human body, wearing metal jewelry, etc. will interfere with the bluetooth connection signal.
3) Whether the bluetooth function of the mobile phone is abnormal.

Q4 . About data backup
The data of the watch is synchronized at least once every 7 days to the mobile phone (the watch end only keeps the data of the last 7 days).

Q5 . How to restart and restore factory settings
Shutdown operation: Watch > set > shutdown/right key restart. Restore factory settings:connect watch to APP>open APP > device model > more settings.

Q6 . Do I need to keep my bluetooth on when I wear my watch?
1) For the three functions, i.e. counting steps, sleeping and alarm clock, you do not need to connect the watch to the mobile phone all the time. If you only need to wear a watch when you exercise, you can connect the watch and your mobile phone to view the data synchronously after the exercise.
2) For the functions of call alert message alert, find the phone, you need to turn on the mobile phone’s bluetooth, and maintain the connection with the mobile phone.

Safety and Product Information

Notes

Battery warning
Do not disassemble, bore or damage the battery. Do not disassemble the built-in batteries of nonreplaceable battery devices. Do not use sharp objects to remove the battery.

Health Warning
If you are wearing a pacemaker or other implanted electronic devices, please consult your doctor before using the heart rate monitoring strap.
The watch’s optical heart rate sensor glows green and flashes. If you suffer from epilepsy or are sensitive to blinking light sources, please consult your physician if you can wear this product.
The device tracks your daily activities through sensors. These data are intended to tell you about your daily activities, such as steps, sleep, distance, heart rate and calories, but may not be completely accurate.
The device, accessories, heart rate sensors and other relevant data are designed for entertainment and fitness, not for medical purposes. They are not applicable to the diagnosis, monitoring, treatment or prevention of any diseases or symptoms. The heart rate data is for reference only. We are not responsible for any consequences caused by any data deviation.

Cycling Warning
If you are wearing a pacemaker or other implanted electronic devices, please consult your doctor before using the heart rate monitoring strap.

Notes:
Device data should be synchronized once every seven days to avoid data loss.
The device has no waterproof effect on seawater, acidic and alkaline solution, chemical reagent and other corrosive liquids.

The damage or defect caused by misuse or improper use is beyond the warranty scope. The device supports the use under cold shower or swimming excluding diving.

* In daily use, the device should be avoided from wearing too tight. Please keep the parts where the device touches the skin dry.
* During heart rate detection, please keep your arm stand still.

The device meets the EU ROHS criterion.
Please refer to IEC 62321, EU ROHS
Directive 2011/65/EU and revised directive.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: this device may not cause harmful interference, and this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could avoid the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN NCORRECT TYPE DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

Old electrical appliances must not be disposed of together with the residual waste, but have to be disposed of separately. The disposal at the communal collecting point via private persons is for free. The owner of old appliances is responsible to bring the appliances to these collecting points or to similar collection points. With this little personal effort, you contribute to recycle valuable raw materials and the treatment of toxic substances.