AUKEY DRS1 4K Dashboard Camera Manual

User Manual
Dashboard Camera

Thank you for purchasing the AUKEY DRS1 4K Dash Camera. Please read this user manual carefully and keep it for future reference. If you need any assistance, please contact our support team with your product model number and Amazon order number.

Package Contents

4K Dash Camera
Dual-Port USB Car Charger
4m / 13ft USB Mini-B Cable
Sticker Mount
Two 3M Stickers
Suction Mount
Six Cable Clips
Trim Removal Tool
User Manual
Warranty Card

Product Diagram

Specifications

Model	DRSI
Image Sensor	IMX415
CPU	NT96670
Screen	2″ LCD
Angle of View	170°
Aperture	f/1.8
Exposure Value	-1.0. -2/3. -1/3. +0.0, +1/3, +2/3, +1.0
Recording Resolutions	4K 130(ps), 1600p 130(ps). 1440p (30fps)• ¹²⁹⁶P 1³⁰¹14. ¹⁰⁶⁰P (¹²⁰fPs).¹⁰⁸⁰P 1⁶⁰flps6 720p (1201p). 720p (60f psi, 720p paps)
Recording Modes	Loop, Motion Defection, Time-lapse-and Emergency Recording
Video Format	MOV
Recording Modes	Loop, Motion Defection, Time-Lapse, and Emergency Recording
Image Format	JPEG
Sound Recording	On / Off
Gravity Sensor Sensitivity	Low / Medium / High / Off
RAM	2GB DDR3
Internal Storage	8MB SPI Flash
MicroSD Card	Class 10 or higher, 128GB Max
Input	DC 5V 1.5A
Operating Temperature	0°C – 65°C / 32°F – 149°F
Materials	ABS, PC. glass
Dimensions	63.2 x 63.5 x 33.4mm / 2.49″ x 2.5″ x 1.32″
Weight	70g

System LED Indicators

LED Status Indicator	Meaning
Solid Green	On; not recording
Flashing Green	On; recording

Control Buttons

Button	Recording Mode	Playlist & Setup Menu	Playback Mode
	Enter Emergency Recording mode	Return to previous menu	Return to playlist / Stop
	View playlist (short press) Turn on/off Audio Recording (long press)	Move up	Delete/Rewind
	Open Setup menu (short press) Take a snapshot (long press)	Move down	Lock & Unlock / Fast-forward
OK	Turn on/off the screen (short press) Turn on/off dash camera Wi-H (long press)	Enter/Confirm	Play/Pause
	Long-press to turn off the dash camera when connected to car power. Long-press again to turn it back on
Reset Button	Press and hold for 7 seconds to restart the dash camera (this won’t affect saved files)

Installing the Dash Camera

For optimal performance, install the AUKEY DRS1 in the top center of your windshield, facing directly ahead. Use the cable clips to help fix the power cable conveniently and safely like in the picture below.

Caution: AUKEY is not responsible for any damage caused to or by the airbag due to the incorrect placement of the device or its cables. To power on, insert the car charger into your car’s 12V socket, then connect the included cable to the car charger and to the mini-B port of the DRS1. Insert a microSD card into the microSD card slot and format it using the ‘Format’ option in Dash Camera ‘Setup.’ After powering on each time, the system will start recording automatically. To power off, long-press the power button or disconnect the USB mini-B cable.
Note: Use the included cable to ensure the optimum performance of AUKEY DRS1.

Setting Up the AukeyDash App

Install and use the ‘AukeyDash’ dash camera app to download, view, and share your footage, and to conveniently change dash camera settings with a smartphone or tablet.

Download the ‘AukeyDash’ app from the Apple App Store / Google Play and install it
Open the app. Tap ‘Get Started’ and then ‘Add a dash cam’
Power on the dash camera and then tap ‘Next’ in the app
Long-press the dash camera ‘OK’ button to turn on dash camera Wi-Fi (an icon will appear in the top-left of the screen)
Tap ‘Next’ and then ‘WiFi settings in the app
Find and connect to the dash camera Wi-Fi on your phone. The Wi-Fi name and password is displayed at the bottom of the dash camera screen. Tap the ‘Connect succeeded’ confirmation
To watch the dash camera videos on your phone, tap ‘View’

Video Recording

Loop Recording: Recording will begin automatically after powering on with a microSD card in the dash camera. Each recorded file is up to ten minutes long, with old footage being replaced when microSD card storage is full
Motion Detection Recording: Switch on motion detection in ‘Setup.’ This function is designed to monitor when you’ve parked and left your vehicle but requires a continuous power supply. It will record video each time motion is detected
Time-Lapse Recording: Switch on time-lapse recording in ‘Setup.’ This function will capture a picture per second to make a video played at 30fps. The videos will be saved in the ‘Video File’ folder

Note: Time-Lapse Recording isn’t suitable for monitoring purposes while driving.

Emergency Recording

Manual File Backup
Press to back up the current file so that it won’t be overwritten. A an icon will appear in the top left of the LCD screen to indicate a protected emergency recording is in progress
Auto File Backup
Once the G-sensor is activated by a sudden impact, the dash camera will automatically make a recording and protect it from being overwritten. Adjust G-sensor sensitivity in the ‘Setup’ menu
Note: Enter the playlist or setup menu (or disconnect power) to end emergency recording mode

Snapshot

Hold down for 3 seconds to take a snapshot while in recording mode
The snapshot files are located in the AUKEYPHOTO folder on the microSD card
The icon will be shown after you take a snapshot. This won’t interrupt the video recording

Audio Recording

Turn on/off audio recording by long-pressing when in recording mode (or by adjusting in the ‘Setup’ menu). Voicing details of possible hazards that may develop, especially when off-camera, may provide useful information. You can even use it to record car license plate numbers that may not be captured on the video.
Viewing Photos and Videos

Viewing Photos and Videos

Press to enter the playlist
View photos or videos by choosing either Photo File’ or ‘Video File’
Select the file you want to view and press OK
For videos, press OK again to begin playback

Deleting and Locking/Unlocking Photos and Videos

Pressto delete or lock/unlock a photo or video file after selecting it from the playlist. If a video is being played, pressto stop it and then press to delete orto lock/unlock
Once deleted, photos and videos can’t be recovered
If you lock a photo or video, it will be protected and not overwritten

MicroSD Card File Transfer

Shut down the dash camera and eject the microSD card
Insert the microSD card Into a computer microSD card slot or reader and your computer will automatically detect the microSD card
Find the video recording files located in the AUKEYWOVIE folder for AUKEY PHOTO for snapshots)
Copy the files to your computer

Product Care and Use

Keep away from liquids, extreme heat, and strong magnetic fields
Avoid touching the lens surface. It may be cleaned with a cotton swab or lens cleaning paper. If any dirt is difficult to remove, a non-abrasive glasses lens cleaner may be used. Don’t use corrosive solutions
Keep important videos and photos backed up elsewhere to protect against file corruption or loss caused by any SD card issues
If the dash camera stops working, press and hold the reset button for 7 seconds to restart it (this won’t affect saved files)

Warranty and Customer Support

For questions. support, or warranty claims, contact us at the address below that corresponds with your region. Please include your Amazon order number and product model number.
Amazon US orders: [email protected]
Amazon EU orders: [email protected]
Amazon CA orders: [email protected]
*Please note. AUKEY con only provide offer sales service for products purchased Madly from AUKEY. If you have purchased from o different seller. please contact them directly for service or warranty issues.

FCC Statement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the knits for a Coss B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference wit did not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following Iwo conditions:(I) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.

Aukey Technology Co., Ltd
www.aukey.com | [email protected]
Room 102, Building P09, South China City
Electronic trading center, Longgang District,
Shenzhen, Guangdong, 518111, CN