Soundcore by Anker Life P2 Mini True Wireless Earbuds Manual

Soundcore by Anker Life P2 Mini True Wireless Earbuds headphones

SPECIFICATIONS

•  Dimensions
  2.56 x 2.09 x 1.34 inches
• Weight
  2.08 ounces
• Impedance
  16Ω
• Driver (Full Range)
  2 x 10mm
• Charging time
  2 hours
• Bluetooth version
  5.0
• Bluetooth frequency
  2402-2480 MHz
• Bluetooth range
  10 m / 33 ft
• Frequency Response
  20Hz-20kHz
• Connectivity Technology
  Wired, Wireless
• Form Factor
  In-Ear
• Headphones Jack 
  USB
• BRAND
  soundcore

Soundcore Earbuds is one of the top sellers on Amazon. They offer a number of features such as active noise canceling, comfortable fir, and good quality of sound. They come in a good design and touch control sensor. The main feature is the IPX5 is water-resistant. And the sound produced from these earbuds is very good and amazing. And true wireless earbuds have oversized triple-ear 10mm that deliver sounds. The charging case can charge the earbuds up to 4 times on one complete charge. And the charging time is very speedy 10 minutes charge gives you an hour of playtime. And the battery timing is very good and amazing that 8 hours of playtime on a single charge. They come with a Comfortable ear fitting design and come with soft ear tips size of small,medium and large.

WHAT’S IN THE BOX?

• 2 mini true wireless earbuds
• Charging case
• XS/S/M/L/XL ear tips
• USB-C cable

CHARGING

•  Remove the protective film from the earbuds when used for the first time.
•  Fully charge both the earbuds and the charging case before the first-time use.
•  To prevent damage, use the provided USB-C cable.
•  Fully dry off the earbuds and the USB port before charging.

LED behavior (Earbuds & Charging case)

	Steady white	Being Charging
	Light off	•         Fully charged •         Remaining battery >10% (when in use)

POWERING ON/OFF

The earbuds will automatically power on when taken out of the charging case and power off when placed back into the charging case.

LED behavior (Earbuds)

ON		Steady white for 1 second
OFF		Steady red for 1 second

• To manually power it on, press the multi-function button on either one of the earbuds.
•  To manually power off, press and hold the multi-function button on either one of the earbuds for 3 seconds.

PAIRING

True Wireless Stereo Connection
The right earbud will automatically connect with the left earbud when taken out of the charging case.

LED behavior (Earbuds)

	Breathing white	TWS connecting
	Steady white for 1 second	TWS connected

•  When powered off, press and hold the multi-function button on both earbuds for 1 second, the earbuds will enter TWS connecting mode.
•  When powered on and connected, place either one of the earbuds into the charging case, you can keep using the other one.
•  When powered on and connected, if either one of the earbuds is out of battery and powered off, you can keep using the other one.
•  When you are on a call, place either one of the earbuds into the charging case, 3 to 5 seconds later, the microphone in the other earbud will be activated.

BLUETOOTH PAIRING WITH YOUR DEVICE

The earbuds will enter pairing mode when powered on. You are requested to confirm the connection when you see a pop-out screen.

LED behaviour (Earbuds)

	Flashing white	Bluetooth pairing
	Steady white for 1 second	Bluetooth connected

In the pairing process, some devices are incompatible with Qualcomm True Wireless Primary-Secondary dual pairing names, it may notice “connection unsuccessful” when you tap “Pair” or even no screen popped out. Don’t worry and it will not influence the use. Once successfully paired, the primary earbud connects with your device and transfers the signal to the secondary earbud, the latter one will not connect with your device. As a result, in the Bluetooth pairing list on your device, it may indicate that only one side is connected while the other side is not.

• To pair with another Bluetooth device, turn off Bluetooth on the currently connected device first.
• Each time you power on your Soundcore earphones, it will automatically connect to your last successfully connected device if available within the Bluetooth range.

WEARING

1.  Choose the ear tips that fit your ears the best.
2.  Insert the earbuds into the inner canal of your ears.
3.  Turn and find the most comfortable position.

CONTROLS

Play / Pause		Press (R/L)
Next track		Press twice (R)
Previous track		Press twice (L)
Volume up / down	Control volume via the connected device

Answer / End a call		Press (R/L)
Reject a call		Press and hold for 1 second (R/L)
Enable mono mode	Remove either one of the earbuds off your ear and press and hold the button on the other earbud for 1 second

Activate Siri or other voice assistant software		Press and hold for 1 second (R/L)

RESET

Reset the earbuds if the earbuds cannot connect with each other properly or cannot connect with your device properly.

1.  Place the earbuds into the charging case and make sure they are being charged.
2.  Press and hold the button on both earbuds for 3 seconds until the LED indicators flash red 3 times and then turn white.

All the memory data will be cleared.

 TECHNICAL SPECIFICTIONS

• Compression ratio:
  4:1
• Word depth:
  Support 16bit and 24bit
• Decoding delay:
  Sample rate 48kHz<2ms
• Dynamic range:
  16bit>92dB, 24bit>120dB
• Data rates:
  352kbps
• Decode mode:
  Stereo

Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.

FREQUENTLY ASKED QUESTION

• A: I’m not sure, but they work great with my Samsung Note 20. Probably would work okay with another Samsung.
• Q: A: Yes, I have mine paired with Apple, Android, and Windows devices and usually switch between them all pretty seamless. There is the rare occasion when I have to ‘remove’ device and reconnect after switching but it’s easy. Just remove the earbuds, turn off Bluetooth, turn it back on and pair the devices again. Hope this helps.
• Q: A: The water resistance level of Life P2 Mini is IPX5. Yes, you can use the Life P2 Mini for running.
• Q: A: If your laptop has bluetooth, it should pair. What you then use the laptop for is your business.
• Q: A: The sound quality of Life P2 Mini is better than Life P2 since the Life P2 Mini has 10mm dynamic drivers.
• Q:
• A: I can’t keep Apple ear buds in place. These stay in place when I am walking, but don’t think they would if I were running, even with the smallest ear tips. That said, they are truly a great sounding budget earbuds.
• Q: A: Yes, the Life P2 Mini is compatible with iPhone devices.
• Q: A: I use only one, I put the left bud in the right ear and turn the stem up, lock it under the fold there. It stays great, even in a call. Or jogging
• Q: A: The Life P2 Mini doesn’t support the Soudncore APP but you can quick triple-tap the right earbud to switch 3 EQ modes(Signature–Bass Booster–Podcast)
• Q: A:Yes, you can pair the Life P2 Mini with your TV and listen to it.
• Q: A: The dimension of the charging case is 61.7mm*43.85mm*31.35mm.
• Q: A: Just about 30 feet or about 35 to 40 feet open field as per my own experience.
• Q: A: Yes
• Q: A: Yes, the Life P2 Mini work with iPhone.
• Q: A: Yes, the Life P2 Mini are good for running.
• Q: A: Excellent in my experience. To test, I called a number and left a voicemail, and then listen to it.