The Xfinity Digital Transport Adapter Remote Setup Guide will show you how to setup your remote so that you can control it from anywhere in the world. It's really easy to do, and once you've finished setting up your remote, you'll have access to over 300 channels of movies, TV shows, sports games and more! Included in these instructions is the important codes list so that you can pair the remote with another device.
Sections in this Manual
Manufactured by Xfinity
Xfinity Digital Transport Adapter
Enjoy your XFINITY® TV right away!
Program your remote to get started.
Digital Transport Adapter Remote Control
It’s simple to program your remote.
Your remote is already programmed to control your digital adapter. To control your TV, follow the steps below to program your remote.
HERE’S HOW
- Install the batteries.
- Find the manufacturer’s code for your TV (see the other side).
- Turn on your TV.
- Press and hold the SET button until the red light flashes twice, then release.
- Enter the first manufacturer’s code you found in step 2. The red light will flash twice.
- Press the POWER button. If the TV turns off, make sure that the VOL+/- and MUTE buttons also work. If so, you’re all set!
- If not, repeat these steps using the next manufacturer’s code (you may need to try several codes to find the one that works). If you still can’t find a code that works, see the “Can’t Find Your Code?” section.
CAN’T FIND YOUR CODE?
If you can’t program your remote using the codes on the back, follow the steps below.
- Turn on your TV.
- On your remote, hold SET until the red light flashes twice, then release.
- Enter 9-9-1 and the red light will flash twice.
- Press CH+ multiple times until the TV turns off.
- Once the TV turns off, press SET.
What your remote can do
