Aigital 1200Mbps WiFi Extender
User Manual
What’s the Function of this WiFi Extender?
— Extend your home existing wifi range to larger areas to achieve signal full coverage.
— Dual Band, can extend both 5G network and 2.4G network.
How to Set Up this WiFi Extender?
- Plug this wifi extender into socket (Note: No need connect any Ethernet Cable to your home original router)
- On phone / computer connect to the wifi signal “WiFi-2.4G-xxxx” or “WiFi-5G-xxxx”. (Note: wifi-2.4G-xxxx and wifi-5G-xxxx are open wifi, no need password to connect, after connected, it shows No Internet Access)
- Open browser and type in IP address 192.168.188.1 in the address bar. Click “Go”. (Note: If your phone prompts you that current WLAN network is unavailable and let you switch, Please Click “NO” or “CANCEL”)
- Type in login password: admin
- Scan and select your home wifi (Note: Please make sure your home wifi signal can reach to this wifi extender)
- Type home wifi’s password in the Wireless Password blank (Note: Please make sure the password must be typed correctly, it’s the wifi password in step 5 you selected)
- Set new WiFi Extender’s SSID and Password, click “Next” (Note: You can set any wifi name and password for 5G and 2.4G network)
- Have a check, it will be your wifi extender’s wifi name and password, if no problem, click “Start Connect”.
- Wait. Close the page or browser, then re-search the new wifi and connect to it.
Want to have Wired Connection? See below:
If you want to have wired connection, please just connect this wifi extender and your wired device via Ethernet cable and get access into internet directly. It has 2 LAN ports, you can connect at least 2 wired devices.
Forget the password or failed setup? Reset it
Press and hold the reset button for 10 seconds,”WiFi-2.4G-xxxx” or “WiFi-5G-xxxx” will become open and unsecured again.
More Inquiries? Contact with us, we are here:
Email: support@aigital
Manufacturer Website: aigital.cn
Skype: [email protected]
