AUKEY EP-T10 True Wireless Bluetooth Headset
Product specification
Product number: AUKEY Series EP-T10
Drive unit: 6mm graphene moving coil
Bluetooth version: Hengxuan Technology Chip BES 2300L/5.0
Audio decoding: SBC、AAC
Battery Info: 5V/500mA
Play Time: About 6-7 hours
The number of times the charging compartment recharges the headset: About 3.5 Next
Charging time: About 1 hour for earphones / 1.5 hours for charging compartment
Weight: A single headset is about 2.3g / the charging compartment is about 58g
Instructions
Bluetooth pairing:
- Take out the left and right earphones at the same time, you will hear the voice prompt of “pairing” from the right earphone, and the LED the indicator light will flash white quickly
- Use device Bluetooth to search for “Aukey EP T10” and click pairing
- Single ear mode: only the right ear is available, first clear the previous pairing record, take out the right ear, and click on the device Click the pairing “Aukey EP-T10”
- Smart sleep: automatically shut down within 5 minutes without connection
Reset method:
- Please delete the Bluetooth connection record on the phone first
- Put the earphones back into the charging compartment, and after confirming that the earphones are bright white, press and hold the LOGO for five seconds at the same time.
A flashing white light indicates that the reset is complete, - Take out both earphones at the same time and wait for the right ear to flash white light quickly to reconnect.
Instructions
- Switch on/off: Take out/put back the charging box
- Adjust the volume level: long press the left ear (down)/right ear (up)
- Switch tracks: tap the left ear 2 times (top)/right ear 2 times (bottom track)
- Play/pause, answer/hang up: tap the left/right ear once
- Voice assistant, rejecting a call: Tap the left/right ear 3 times. Voice assistant: Long press the left/right ear for 2 seconds to reject the call
