TIMEX Atomic Digital Clock User Guide
NOTE: A clear protective film is applied to the LCD at the factory that must be removed prior to using this product. Locate the clear tab and simply peel to remove.
USER GUIDE
Thank you for purchasing this quality TIMEX ® brand product. Please read these instructions COMPLETELY to fully understand the features and functions of this clock, and to enjoy its benefts. Make sure to keep this guide handy for future reference.
To receive product information, register your product online. It’s quick & easy! Log on to http://www.chaneyinstrument.com/ProductReg.aspx
Package Contents:
(1) Atomic Digital Clock
(1) Wireless Outdoor Temperature Sensor
(1) User Guide
What You’ll Need:
(8) AA Batteries
WHAT IS AN ATOMIC CLOCK?
An Atomic clock is a timepiece that maintains accuracy up to one second per million years using the most precise method of time synchronization, radio signals. In North America, the National Institute of Standards and Technologies (NIST) operates an Atomic clock in Fort Collins, Colorado, that transmits the time codes via the radio station WWVB.
This quality TIMEX ® clock includes a built-in receiver that picks up the Atomic radio signal from WWVB. To maintain the best possible reception, place the unit so that the backside faces in the general direction of Colorado. What’s more, the IntelliTime ® technology built into this clock makes for hassle-free automatic setting and resetting for daylight saving time.
PLEASE NOTE: Due to solar radiation in the atmosphere, the atomic clock signal is weaker during the day. Most synchronization will happen at night when there is less interference.
BASIC SETUP
- Battery Installation – BEGIN WITH THE OUTDOOR WIRELESS SENSOR
- Initial Setup – once the batteries are installed, the clock will power up. The display will appear as follows:
The clock will initially set itself to the correct time and date, defaulting to EST (Eastern Standard Time). It will also begin displaying the temperatures. The clock will begin searching for the Atomic signal.
Note: The clock will adjust for daylight saving time, even if it is unable to receive the WWVB signal
After the clock acquires the Atomic signal (this may take 24-48 hours) the time, date and daylight saving time changes will update automatically, giving you maintenance-free operation and accuracy to the split second - Choosing Your Time Zone
- Press and HOLD the SET button until you see the selection of seven time zones flashing on the LCD screen then RELEASE.
- Press the UP ARROW repeatedly until you reach your time zone, then press SET
In the event you wish to manually change the clock settings, please use the instructions on page 5.
Battery Choice and Temperature Range:
extended periods of extreme cold temperatures (below -4°f/ -20°c) can cause alkaline batteries to function improperly. this may cause the outdoor wireless sensor to stop transmitting temperature readings. we recommend using lithium batteries in extreme low temperature conditions to ensure continued operation of the outdoor sensor.
For the digital atomic clock we recommend only alkaline batteries.
Placement of the Clock:
Place the clock in an area free of dirt and dust. To help ensure an accurate indoor temperature measurement, be sure to place the main unit out of direct sunlight, and away from any heat sources or vents in your home.
This clock may be hung on a wall using the integrated wall-hanging hole, or you may place the unit on a tabletop or other fat surface using the swing-out stands.
Placement of the Outdoor Sensor:
The wireless temperature sensor MUST BE PLACED OUTDOORS to capture and relay the outdoor temperature to the clock display unit. You may place your wireless temperature sensor outside up to 100 feet (30m) from the clock, as shown.
The sensor is water resistant and is designed for outdoor use. However, to extend the life of the product, place it in an area protected from harsh weather elements. To ensure an accurate temperature reading, be sure the sensor is out of direct sunlight and away from any heat sources.
Future Forecast Icon
The future forecast feature automatically gives you the predicted weather forecast icon for the next 12 to 24 hours based on an advanced algorithm that analyzes barometric pressure changes and temperature. This weather forecaster will provide the most accurate forecast that a single stations instrument can provide.
Weather Trend Icon
The “Weather Trend” directional arrow icon will indicate one of three barometric pressure trend directions. This will give an additional indicatin of future weather conditions
Wireless Signal Reception Icons
The main unit has a signal reception icon near the outdoor temperature display area. If there are a low number of “bars” present, you may experience no temperature display (“–”) or inaccuracy. In either case, you may need to relocate one of both of the units. If most or all 4 of the bars are present, wireless reception is good and no action is required.
SETTING THE CLOCK MANUALLY
TROUBLESHOOTING
Product Specifications
- Indoor Temp. Range = 32°F to 140°F (0°C to 60°C)
*NOTE: indoor unit should not be placed in conditions under 32˚F - Outdoor Temp. Range = -40°F to 158°F (-40°C to 70°C)
- Atomic Clock Frequency = WWVB 60Khz 433Mhz – Radio Signal Synchronizes daily in optimal conditions 100′ (30m) Radio Frequency Transmission Range
- Power Requirements = (8) “AA” Alkaline Batteries
BATTERY SAFETY:
Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals. PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
Please DO NOT return product to the retail store. For technical assistance and product return information, please call customer care @ 877-221-1252 Monday – Friday — 8:00 a.m. – 4:30 p.m. CST
Timex ® is a registered trademark of Timex Corporation in the U.S. and other countries.
Manufactured and serviced by
Chaney Instrument Co.
Lake Geneva, WI 53147
www.chaneyinstrument.com
© 2010 Chaney Instrument Co.
INST – 75329T 070110
This device complies with part 15 of the FCC rules and RSS-210 of IC rules subject to the following two conditions:
1- This device may NOT cause harmful interference, and
2- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, There is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment.
Patent numbers: 5.978.738: 6.076.044: 6.597.990
