The Mpow Bluetooth headphones are made to be durable, lightweight, and stylish. They're perfect for any activity. However, they can't do much if you don't know how to use them. Below you'll find instructions on pairing your Mpow Bluetooth Headphones with the device of your choice (phone, tablet, laptop).
Sections in this Manual
These instructions are general for Mpow Bluetooth devices, for your specific device, please browse the Mpow instructions here or search at the bottom.
Charging the headset
You must charge the headset fully(more than 6 hours) before using the headset for the first time.
- Connect the USB charging cable to the USB charge port of the headphone.
- The indicator light will turn red when charging.
- The full charge takes about 2 hours.
- The red indicator light goes out and turns blue when charging is completed.
Low-Voltage alert
When the indicator turns red and alert tone “battery low” sounds indicate that the battery has run out, need to charge as soon as possible.
Power on/off the headset
Power on: Press the “MPOW” button about 3 seconds until the blue indicator flash. You will also hear the indication voice “Power On”.
Power off: Press the “MPOW” button for about 3 seconds until the red indicator light flash and then goes off. You will also hear the indication voice “Power Off”.
