Loading manuals...

Mpow Bluetooth Headphones Manual and Pairing Instructions


The Mpow Bluetooth headphones are made to be durable, lightweight, and stylish. They're perfect for any activity. However, they can't do much if you don't know how to use them. Below you'll find instructions on pairing your Mpow Bluetooth Headphones with the device of your choice (phone, tablet, laptop).

These instructions are general for Mpow Bluetooth devices, for your specific device, please browse the Mpow instructions here or search at the bottom.

Charging The Headset

You must charge the headset fully(more than 6 hours) before using the headset for the first time.

  1. Connect the USB charging cable to the USB charge port of the headphone.
  2. The indicator light will turn red when charging.
  3. The full charge takes about 2 hours.
  4. The red indicator light goes out and turns blue when charging is completed.

Low-voltage Alert

When the indicator turns red and alert tone “battery low” sounds indicate that the battery has run out, need to charge as soon as possible.

Power On/off The Headset

Power on: Press the “MPOW” button about 3 seconds until the blue indicator flash. You will also hear the indication voice “Power On”.

Power off: Press the “MPOW” button for about 3 seconds until the red indicator light flash and then goes off. You will also hear the indication voice “Power Off”.

Pair To Your Smartphone

  1. Press the “MPOW” button for about 5 seconds until the red and blue lights start flashing alternately.
  2. Turn on the Bluetooth function of your phone. Search for the Bluetooth devices and select “MPOW SWIFT”
  3. Enter the code “0000” if needed.
  4. If paring is successful, the blue light indicator starts flashing. You will also hear the indication voice “connected.”

Remark:

1. Please make sure the headphone is off before pair.
2. It will connect to the pre-set phone automatically when turns on. (Please make sure the Bluetooth function of your phone is on.)

Connect Two Bluetooth Devices At The same Time

  1. Pair the Bluetooth headphone to the first phone.
  2. After pair successfully, turn off the headset, and also disable the Bluetooth function of the first phone.
  3. Pair the Bluetooth headphone to the second phone.
  4. After pair successfully, turn on the Bluetooth function of the first phone. Select the “MPOW SWIFT” and click “connect”.
  5. Two phones will both connect the headphone at the same time.

Answering A Call

For Iphone Users

Selection 1. Press the “MPOW” button.
Selection 2. Press the “Answer” button of your iPhone and check your iPhone call menu. Look for the audio source and select the headphone “MPOW SWIFT”.

For Android User

Selection 1. Press the “MPOW” button.
Selection 2. Press the “Answer” button of your phone.

Ending A Call

Press the “MPOW” button.

Rejecting A Call

Double press the “MPOW” button to reject the call when the call is ringing.

Redialing The Last Called Number

Double press the “MPOW” button

Muting The Call

  1. Double press the “MPOW” button to activate the mute function when talking.
  2. Double press the “MPOW” button to cancel the mute function when muting.

Playing Music

When you are listening to the music, you can press the buttons “Play, Pause, Previous Song, Next song” to select your optimal performance and control the volume.

  1. Play/Pause: Short press the MPOW button.
  2. Next Song: Long press the button “ – ”.
  3. Previous Song: Long press the button “ + ”.
  4. Volume Up: Short press the button “ + ”.
  5. Volume Down: Short press the button “ – ” 
Mpow Bluetooth Headphones Manual and Pairing Instructions Image

Manufactured by MPow

(all MPow manuals)