AFTERSHOKZ OpenMove Wireless Open-Ear Headphone manual

AFTERSHOKZ OpenMove Wireless Open-Ear Headphone

OVERVIEW

How to Set Up Open Move

Charge
Charge the headphones with the included USB-C charging cable. The LED indicator will change from red to blue when charging is complete.
Pair
Begin with your headphones powered off. Enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
Connect
Open your device’s Bluetooth®menu and select “OpenMove by AfterShokz.” Audrey will say “connected” and the LED indicator will flash blue one time.
Let us take care of you! Protect your headphones against defects.
Make sure to register your OpenMove at Aftershokz.com

Multifunction Button (A)

Function	Action	Prompt / “Audrey Says™”
Play/pause music	Click once	One beep
Skip to the next song	Double-click while music is playing	One beep
Skip to the previous song	Triple-click while music is playing	One beep
Switch language	Double-click while on pairing	English
Answer call	Click once	Two beeps
End call	Click once	One beep
Answer call waiting and hang up on current caller	Press and hold for 2 seconds	One beep
Reject a call	Press and hold for 2 seconds	Two beeps
Activate device’s voice assistant	Press and hold for 2 seconds	Device beep
Redial last number	Double-click (when idle)	“Redial last number”

Volume+ / Power Button (B); Volume- Button (C)

Function	Action	Prompt / “Audrey Says™”
Power on	Press and hold volume+ for 2 seconds	“Welcome to AfterShokz”
Power off	Press and hold volume+ for 3 seconds	“Power off”
Mute	Press and hold both buttons for 2 seconds while on a call	“Mute on” or “Mute off”
Switch EQ	Press and hold both buttons for 3 seconds while music is playing	“Standard mode / Vocal booster mode / Earplug mode”
Check battery status	Click the volume+ or volume button while music is paused	“Battery high/Battery medium/ Battery low/Charge me”
Adjust volume	Click the volume+ or volume- button to adjust volume while music is playing	One beep

Speciﬁcations

Model number	AS660	Frequency response	Frequency response
Speaker type	Bone conduction transducer	Speaker sensitivity	Speaker sensitivity
Bluetooth® version	Bluetooth® v5.0	Microphone sensitivity	-40 ± 2dB
Wireless range	10 m	Frequency band	2402 – 2480MHz
Battery	Rechargeable Li-Polymer battery	Battery capacity	135 mAh
Continuous play	Up to 6 hours	Standby time	Up to 10 days
Charge time	2 hours	Charge voltage	5.25V ± 5%
Charge type	USB-C	Speaker impedance	8.0 ± 0.5ohm
Water resistance	IP55	Maximum RF output power	4dBm
Weight	29 g	Warranty	2 years
Compatible proﬁles	HSP, HFP, A2DP AND AVRCP

LED Indicator

Solid red	Charging
Solid blue	Charging complete
Flashes red and blue	Pairing mode
Flashes blue	Incoming call
Flashes red every 2 minutes	Low battery

Multipoint Pairing

Multipoint pairing allows OpenMove to be connected to two devices at once, allowing users to seamlessly transition between the two.

Begin with your headphones powered off.
Press and hold volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
Press and hold the multifunction button and volume+ button for 3 seconds. Audrey says “multipoint enabled”.
Open your first device’s Bluetooth®menu and select “OpenMove by AfterShokz.” Audrey says “connected”.
Turn your headphones off.
Re-enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
Open your second device’s Bluetooth®menu and select “OpenMove by AfterShokz.” Audrey says “connected”.
Turn your headphones off.
Turn your headphones on. Your headphones are now connected to both devices. Audrey says “connected” and “device 2 connected”.
To turn off multipoint pairing: Press and hold the multifunction and volume – buttons for 3 seconds when pairing. Audrey says”multipoint disabled”.

More information: bit.ly/aftershokzpairing

How to Reset Your Headphones

Begin with your headphones powered off.
Enter pairing mode by pressing and holding volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.
Press and hold the multifunction button, volume+ button, and volume- button(all three buttons) simultaneously for 3-5 seconds, until you hear two beeps or feel vibrations.
Turn your headphones off. OpenMove is now reset and can be re-paired to your device.

Optional Accessories

Earplugs (D)
Use earplugs with headphones in environments where it is safe to block out ambient noise, such as on a train or airplane.

Roll earplugs firmly between fingers and place in ears.
To adjust EQ settings for earplugs, press and hold volume+ and volume- buttons simultaneously while music is playing. Continue through options until “earplug mode.”
Switch EQ to other settings when you take out the earplugs.

Manufacturer

AfterShokz LLC
3200 Gracie Kiltz Lane, 4th floor, Austin, TX 78758

8000500039(A0)

Pdf Download Resources

AFTERSHOKZ OpenMove Wireless Open-Ear Headphone [pdf] User Guide
Read more: https://manuals.plus/aftershokz/openmove-wireless-open-ear-headphone-manual#ixzz7cupOPJlg

FAQ’S

My headphones won’t charge. What should I do?

Make sure your headphones are fully charged. If they still won’t charge, please contact us at 1-800-843-4287 and we will be happy to assist you.

My headphones won’t pair. What should I do?

Make sure your headphones are powered off. If they still won’t pair, please contact us at 1-800-843-4287 and we will be happy to assist you.

My headphones won’t connect to my device. What should I do?

Make sure your device is in pairing mode and that the OpenMove is powered off. If they still won’t connect, please contact us at 1-800-843-4287 and we will be happy to assist you.

Are AfterShokz OpenMove waterproof?

OpenMove are rated IP55 in terms of waterproofness, therefore, they can be exposed to light sweat/ moisture and dust but we do not recommend showering with them.

Can I wear AfterShokz in shower?

No, they are water-resistant but not waterproof. You could and almost definitely would damage these in the shower. They might work in a bath if you’re not going to dunk your head.

Can I use AfterShokz with Iphone?

Yes, I have two Aftershokz headphones, including the OpenComm headset, and they both pair easily with my Apple iphone and mini ipad.

Can AfterShokz be used to make/take calls?

Yes. All our wireless models are equipped with dual noise canceling microphones for making and taking phone calls when paired with a smartphone or other Bluetooth-enabled device.

Can you sleep with AfterShokz?

Believe it or not, many people use their AfterShokz headphones to sleep! Turn out the lights, throw on some white noise, and get comfy. If you sleep with a snoring partner or you have pets running around that could disturb your shut-eye, your earplugs will definitely come in handy!

Does AfterShokz turn off automatically?

The right earpiece features two buttons to control the volume. The volume-up button also doubles as the power button. Long-press it to turn the device on and off—which you’ll want to remember, since the headphones don’t turn themselves off automatically.

Where is mute button on AfterShokz?

The volume up and down buttons. Pressing and holding the volume up turns the headset on or off. Pressing both for two seconds will mute/unmute the mic when on a call.

How do you check an AfterShokz battery?

You can check the battery status by powering on your headphones and clicking volume+ or volume- while no music is playing. Audrey will say “Battery High,” “Battery Medium,” “Battery Low” or “Charge Me.”

What does purple light mean on AfterShokz?

Purple light means it’s dead.

How do you reset Bluetooth headphones?

Unplug the headphones from their charging port. Press and hold the power button for 10 seconds. Wait for the LED light to blink to indicate that you have successfully reset your headphones.