Set up your Magic Keyboard, Magic Mouse, or Magic Trackpad with your Mac

If your Apple wireless devices came with a new iMac, turn the devices on to begin using them. If you bought the devices separately or if you need to pair them with your Mac again, follow these steps.

Magic Keyboard, Magic Mouse, and Magic Trackpad work wirelessly with your Mac via Bluetooth when they’re paired and turned on.

If your devices came with a new iMac, they’re already paired with the computer. Just turn them on when you first turn on your Mac. To make sure that your device is turned on, check its power switch. If green is visible, the device is on.

If you bought your devices separately — or if they’ve become unpaired from your Mac — follow the steps below to pair them.

How to set up your wireless device

Follow these steps to set up your Magic Keyboard, Magic Mouse, or Magic Trackpad:

1. Connect a Lightning to USB Cable¹ or a USB-C to Lightning Cable to the Lightning port on the device² and connect the other end of the cable to your Mac.
2. Make sure that the device’s power switch is in the ON position. (Green is visible under the switch when the device is on.)
3. Choose Apple menu  > System Preferences, then click Bluetooth to open the Bluetooth preferences window. When the device pairs with your Mac, it appears in the list of devices.
4. Check the Bluetooth preferences window to see your device’s charge level. When the device is charged, unplug it for wireless use.

If your device won’t connect

If you’re unable to connect your device, learn what to do.

How to set up earlier Apple wireless devices

If your Apple wireless device doesn’t have a Lightning port, use a wired mouse or trackpad — or the built-in trackpad if you’re using a Mac notebook — then follow these steps to set up your earlier Apple wireless devices (such as the Apple Wireless Keyboard, Magic Mouse, and Magic Trackpad):

1. Turn on your device.
2. Wait until your device’s LED starts blinking, which means that it’s in Discoverable Mode. (If the LED is on but not blinking, your device is already paired with another host. To unpair it, choose Apple menu > System Preferences, then click Bluetooth. Hover the pointer over the device you want to remove, then click the button  that appears next to the device’s name. Turn the device off, then start again at step 1.)
3. Choose Apple menu > System Preferences, then click Bluetooth.
4. Wait while your Mac searches for your device. When your device appears in Bluetooth preferences, click Pair¹.

Published Date: May 21, 2021