Anker Soundcore Liberty 2 Pro
Product specification
Product number : Anker Soundcore liberty 2 Pro
Drive unit : 11mm moving coil iron monolith
Bluetooth version : 5.0
Audio decoding : SBC、AAC、aptX
Battery capacity : Charging compartment 500mAh, headset 65mAh*2
Endurance : 32 hours, 8 hours per ear
The number of times the charging compartment recharges the headset : About 4th hours
Charging Time :
Charge for 1.5 hours, support Qi wireless charging;
Fast charge function: charge for 10 minutes, listen for 2 hours
Weight : 5.1g per ear, 42.3g charging compartment
Instructions
Bluetooth pairing
- After taking out both ears, wait for the right ear to flash white light quickly and the left ear to flash white light slowly
- Turn on the phone’s Bluetooth pairing “Soundcore Liberty 2 Pro”
(You have to wait another 3-5 seconds and another window will pop up, click to pair “Soundcore Liberty 2 Pro-L” Only completed) - Single ear mode: Both left and right ears can be switched directly without re-pairing Put one ear back into the charging compartment, it will be in monaural mode, take it out again, it will return to binaural mode
- A small step: After opening the charging compartment, press the rear circular button for 3-5 seconds, and wait for the right ear to flash white light quickly.
To re-pair the device directly
Reset method
- Delete the device pairing record on the phone
- Put the headset back into the charging compartment and close it and wait for 5 seconds
- After opening the charging compartment, press the round button behind the charging compartment for 10 seconds
- Until the headset flashes red light 3 times, the reset is successful and you can re-pair
Instructions
- Switch on/off: take out/put back the charging box;
Long press for 1 second to turn on, long press for 5 seconds to turn off - Adjust the volume: APP or connected device
- Switch tracks: tap the left/right ear twice
- Play/pause, answer/hang up: tap the left/right ear once
- Reject the call: Long press the left/right ear for 1 second
(The above operations are all preset by the original factory, and the demo opportunity may be different due to changes during the trial period) - SoundcoreAPP: can change button functions, adjust EQ and HeardID
- Charging compartment power display: one light flashing is <30%, one light is on and one light is flashing for 30%-70%, Two lights are on and the third light is flashing at >70%, and all lights are on at 100%
