Loading manuals...

beper Heated Electric ICE Scraper Manual

beper Heated Electric ICE Scraper Manual Image

beper Heated Electric ICE Scraper User Guide

For further information and/or for instructions for use in other languages , please visit: beper.com


Read the following instructions carefully, since they give you useful safety information about installation, use and maintenance and help you avoid mishaps and possible accidents.

  • Remove the packing and make sure that the appliance is intact, with special attention to the supply cable.
  • The elements of the packing (plastic bags, polystyrene, etc) do not have to be accessible to the children, in order to preserve them from danger sources. It is recommended not to throw these packing material in the domestic waste, but to deliver them to the appropriate station of collection or destruction refusals, asking eventually information to the manager of the Sanitation Department of your own municipality.
  • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
  • Before connecting the appliance make sure that the mains voltage corresponds to the data specified on the label.
  • The appliance can be damaged if the voltage is not correct.
  • If the plug does not suit the socket, let it be replaced with another suitable plug by qualified personnel only, which shall also ensure that the section of the socket cables is suitable for your appliance power absorption.
  • Generally, the use adaptors multiple plugs and/or extensions is not recommended; should they be necessary, please use only simple or multiple adaptors and extensions in compliance with the safety rules in force, making sure that the capacity absorption limit marked on the simple adaptors and the extensions and the maximum power limit marked on the multiple adaptor are not exceeded.
  • Do not use the appliance if the cable or the plug shows any damages.
  • Do not use the appliance after a possible irregular working. In this case, switch it off and do not break it open. Refer to an authorized
  • Beper after-sale service for repair and require original spare parts only. Failing to follow these instructions may impair the safety of your appliance.
  • This appliance is to be destined to its special purpose only. Any other use is to be considered as improper and thus dangerous. The manufacturer cannot be responsible for any damages deriving from improper, wrong or incautious use.
  • This appliance is for household use only.
  • To protect against electric shock, do not immerse cord, plug or any parts of the appliance into water or other fluids.
  • Do not use the appliance near explosives, highly flammable materials, gases or burning flames.
  • Do not allow children, disabled people or every people without experience or technical ability to use the appliance if they are not properly watched over. Close supervision is necessary when any appliance used by or near children.

Product description

  1. Ice scraper plug
  2. Scraper blade
  3. Squeegee Blade
  4. Heating element
  5. Light
  6. On/Off switch
  7. Extension button

Use instructions

Insert the item’s plug into the cigarette lighter socket (12V) of your vehicle.
Allow the heating element to warm for approx. 2- 3 minutes.
Hold the ice scraper over the frozen surface of the windshield or car window for a few seconds.
Once the ice layer begins to melt, scrape the ice with the scraper blade and move to another area.

Note: do not leave the ice scraper in one location for over two minutes.

Important: the heating element should never make direct contact with glass or other surfaces of the vehicle.

To remove any ice residue or water drops, use the squeegee blade found on the upper part of the scraper. Unplug the ice scraper from the socket and allow it to cool down for 3-5 minutes before storing.

Warning icon Caution

  • The heating element can get very hot and can cause burns and start a fire.
  • Be very careful not to place the heating element on to skin, clothing, or any surface of the vehicle.
  • Do not leave the ice scraper unattended when plugged in.
  • Never place the ice scraper directly on windshield or car window glass, or any other vehicles interior surfaces.
  • Do not use on plexiglass or on plastic window of convertibles.

Cleaning and maintenance

Make sure the ice scraper is unplugged and completely cold before proceeding with any cleaning operation.
Clean any ice or moisture residue with a soft cloth; make sure to dry thoroughly before storing.
Use a slightly damp cloth to clean the outer surface of the ice scraper.

Important: never clean the ice scraper under tap water.

Technical data

  • Power: 18 W
  • Adapter: 12V

For any improvement reasons, Beper reserves the right to modify or improve the product without any notice.

The European directive 2011/65/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment. The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.


This appliance has been checked in the factory. From the date of original purchase a 24 month guarantee applies to material and production defects. The purchase receipt and the guarantee certificate must be submitted together in case of claim to guarantee.

The guarantee is valid only with a guaranty certificate and proof of purchase (fiscal receipt) indicating the date of purchase and the model of the appliance

For any technical assistance, please contact directly the seller or our head office in order to preserve the appliance’s efficiency and NOT TO void the guarantee. Any intervention on this appliance by non-authorized persons will automatically void the guarantee.


If the appliance shows defects as a result of faulty material and/or production during the period of guarantee, we guarantee repair free of charge on condition that:

  • The appliance has been used properly and for the purpose for which it has been intended.
  • The appliance has not been tampered with, otherwise it is not maintainable.
  • The purchase receipt shall be presented.
  • The appliance showing a fair wear and tear shall not be covered by this guarantee.

Therefore, any part that could be accidentally broken or having visible signs of use in consumable products (such as lamps, batteries, heating elements…) the aesthetic parts are excluded from the guarantee, and any defect whatsoever resulting from non-respect of the rules for use, negligence in usage and/or maintenance of the appliance, carelessness, wrong or improper installation, damage during transport and any other damage not attributable the supplier.

For every defect that could not be repaired within the guarantee period, the appliance will be replaced free of charge.

In any case, if the part to be replaced for defect, breakage or malfunction is an accessory and/or a detachable part of the product, Beper reserves the right to replace only the very part in question and not the entire product

Contact your distributor in your country or after sales department beper.
E-mail [email protected] which will forward your enquiries to your distributor.



Via Salieri, 30 – 37050 – Vallese di Oppeano – Verona
Tel. 045/7134674
Fax 045/6984019


More Manuals From beper