Voice Assistant
Step 1: Long press the MFB on either earbud for 2 seconds to activate the voice assistant
Step 2: The respective voice assistant screen pops up and you may place your commands at ease.
Tips: You may try the following commands,
- What is the weather?
- Play a song
- Set a reminder
Smart Power Off
Step 1: After usage, remove both the earbuds from your ears
Step 2: Place the earbuds back inside the charging case in correct orientation and close the case lid.
Step 3: The earbuds will automatically switch o (and enter into charging mode.)
Manual Power Off
Step 1: Long press the MFB on either earbud for 5 seconds in order to manually switch o the earbuds. Please note that this powers o both the earbuds
Step 2: Please keep the earbuds back into the charging case to charge the earbuds.
Basic Functions
- Voice Assistant: Long press the MFB on either earbud for 2 seconds to activate the voice assistant
- Answer/Hang Up Call: Single press the MFB on either earbud to answer an incoming call and once again to hang up an ongoing call
- Reject Call: Long press the MFB for 2 seconds to reject incoming calls.
- Play/Pause Music: Single press the MFB on either earbud to play a song or to pause one
- Next Track: When playing music, double press the right earbud’s MFB in order to skip to the next song on the playlist
- Previous Track: When playing music, double press the left earbud’s MFB in order to return to the previous song on the playlist
Note: Volume cannot be controlled via earbuds and can only be adjusted via phone/media device.
Factory Reset
Primary Method :
NOTE: (Before performing reset, clear “Airodpes 138” from pairing device history by forgetting device)
- Step 1: Place the earbuds inside the case and close the lid.
- Step 2: Take out both the earbuds, and triple tap on their MFBs (Multifunction
Button) simultaneously to perform reset indicated by red LED which gets emitted for 1 second. - Step 3: Place back the earbuds inside the case in their correct orientation.
- Step 4: Open the case lid, and refer to “first time pairing” or perform connection via IWP method. (Refer to user manual)
Congratulations, your Airdopes 138 has been reset!
Secondary Method :
NOTE: (Before performing reset, clear “Airdopes 138” from pairing device history by forgetting device)
- Step 1: Place the earbuds inside the case and close the lid.
- Step 2: First, take out one earbud and triple tap on its MFB to perform reset. Then take out the other earbud and triple tap on its MFB to perform reset. Both the individual resets when performed successfully are indicated by emitting of red LED for 1 second.
- Step 3: Place back both the earbuds inside the case in their correct orientation.
- Step 4: Open the case lid, and refer to “first time pairing” or perform connection via IWP method. (Refer to user manual)
