CORSAIR Scimitar RGB Elite
GETTING TO KNOW YOUR MOUSE
A — LEFT CLICK BUTTON
B — MIDDLE CLICK BUTTON
C — RIGHT CLICK BUTTON
D — OPTICAL GAMING SENSOR
E — SIDE KEYPAD BUTTONS
F — USB CONNECTION CABLE
G — PROFILE CYCLE BUTTON
H — DPI CYCLE BUTTON
I — PTFE GLIDE PADS
J — KEYPAD SLIDER LOCK
SETTING UP YOUR MOUSE
> Turn on your computer and connect the mouse to available USB 2.0 or USB 3.0 port on your computer.
> Download the iCUE software from www.corsair.com/downloads.
> Run the installer program and follow instructions for installation.
ADJUSTING THE KEY SLIDER
Patented Key Slider™ control system lets you reposition the 12 side buttons to comfortably fit your grip. To adjust the keypad slider, please follow the steps below:
> Insert the included Allen key into the keypad slider lock located at the bottom of the mouse and turn it counterclockwise to unlock the keypad.
> Move keypad to desired position and turn the Allen key clockwise to lock the keypad.
ONBOARD PROFILES
Three onboard profile slots hold predefined DPI settings, button assignments and lighting effects. All those settings can be fully customized using iCUE software and stored back in onboard memory.
| PROFILE #1 | PROFILE #2 | PROFILE #3 | ||
| ONBOARD PROFILE STATUS LED | RED | GREEN | BLUE | |
| DPI STAGE STATUS | ||||
| STAGE #1 | RED | 800 DPI | 400 DPI | 800 DPI |
| STAGE #2 | WHITE | 1500 DPI | 800 DPI | 1500 DPI |
| STAGE #3 | GREEN | 3000 DPI | 1500 DPI | 4500 DPI |
| STAGE #4 | PURPLE | 6000 DPI | 3000 DPI | 9000 DPI |
| STAGE #5 | CAPRI | 9000 DPI | 6000 DPI | 18000 DPI |
| KEYPAD SLIDER MAPPING | ||||
| BUTTON 1 | 1 | 1 | 1 | |
| BUTTON 2 | 2 | 2 | 2 | |
| BUTTON 3 | 3 | 3 | 3 | |
| BUTTON 4 | 4 | 4 | 4 | |
| BUTTON 5 | 5 | 5 | 5 | |
| BUTTON 6 | 6 | 6 | 6 | |
| BUTTON 7 | 7 | 7 | 7 | |
| BUTTON 8 | 8 | 8 | 8 | |
| BUTTON 9 | 9 | 9 | 9 | |
| BUTTON 10 | 0 | 0 | 0 | |
| BUTTON 11 | – | – | – | |
| BUTTON 12 | = | = | = | |
NOTE ON ENVIRONMENTAL PROTECTION
After the implementation of the European Directive 2012/19/EU in the national legal system, the following applies:
> Electrical and electronic devices may not be disposed of with domestic waste.
> Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose or point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilizing old devices, you are making an important contribution to protecting our environment.
