dyson Hot & Cool Fan Heater Manual

dyson Hot andamp; Cool Fan Heater

ASSEMBLY

Remote control docks magnetically.

Align the black arrows. Then twist clockwise until it clicks and locks.

DYSON CUSTOMER CARE
THANK YOU FOR CHOOSING TO BUY A DYSON APPLIANCE
After registering your free 2 year guarantee, your Dyson appliance will be covered for parts and labour for 2 years from the date of purchase, subject to the terms of the guarantee. If you have any questions about your Dyson appliance, call the Dyson Helpline with your serial number and details of where/when you bought the appliance.
Most questions can be solved over the phone by one of our trained Dyson Helpline staff. Alternatively, visit www.dyson.com for online help, general tips and useful information about Dyson. Your serial number can be found on your rating plate which is on the base of the appliance. Note your serial number for future reference.

IMPORTANT SAFETY INSTRUCTIONS

BEFORE USING THIS APPLIANCE READ ALL INSTRUCTIONS AND CAUTIONARY MARKINGS IN THIS MANUAL AND ON THE APPLIANCE
When using an electrical appliance, basic precautions should always be followed, including the following:

WARNING
THE HEATER AND THE REMOTE CONTROL BOTH CONTAIN MAGNETS.

Pacemakers and defibrillators may be affected by strong magnetic fields. If you or someone in your household has a pacemaker or defibrillator, avoid placing the remote
control in a pocket or near to the device.
Credit cards and electronic storage media may also be affected by magnets and should be kept away from the remote control and the top of the heater.

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

This heater is hot when in use and for a short period after use. To avoid burns, do not let bare skin touch hot surfaces. When moving the heater hold it by the base, not the
air loop amplifier.
Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains, at least 0.9m (3 feet) from the front of the heater and keep them away from
the sides and rear when the heater is plugged in.
Extreme caution is necessary when any heater is used by or near children or infirm persons and whenever the heater is left operating and unattended.
Do not allow to be used as a toy. Close attention is necessary when used by or near young children. Children should be supervised to ensure that they do not play with the
heater or remote control.
This heater and remote control are not intended for use by young children or infirm persons with reduced physical, sensory or reasoning capabilities, or lack of experience
and knowledge, unless they have been given supervision or instruction by a responsible person concerning use of the heater to ensure that they can use it safely.
The base must be fitted securely before operating. Do not dismantle or use without the base fitted.
Suitable for dry locations ONLY. Do not use outdoors or on wet surfaces. Do not use in bathrooms, laundry areas and similar indoor locations. Never locate the heater
where it may fall into a bath or other water container. Do not use or store where it may get wet or in the immediate surroundings of a bath, a shower or a swimming pool.
A heater has hot parts inside. Do not use it in areas where petrol, paint, or flammable liquids are used or stored or where their vapours are present. Do not use in
conjunction with or directly next to an air freshener or similar products.
Do not locate directly below a mains electricity supply socket.
Always plug directly into a wall socket. Never use with an extension cable as overloading may result in the cable overheating and catching fire.
Do not handle any part of the plug or heater with wet hands.
Do not unplug by pulling on the cable. To unplug, grasp the plug, not the cable.
Do not stretch the cable or place the cable under strain. Do not run the cable under carpeting. Do not cover the cable with throw rugs, runners, or similar coverings. Do not route the cable under furniture or appliances. To avoid a tripping hazard arrange the cable away from traffic area so that it will not be tripped over.
Do not use with a damaged cable or plug. If the supply cable is damaged it must be replaced by Dyson or its service agent or similarly qualified persons in order to avoid
a hazard.
To disconnect the heater, turn the controls off, then remove the plug from the socket. Always unplug the heater when not in use.
Do not use if the heater malfunctions or has been dropped or damaged in any manner. Contact the Dyson Helpline or return to an authorised service facility for examination and/or repair.
To prevent a possible fire, do not use with any opening or exhaust blocked, and keep free of dust, lint, hair, and anything that may reduce airflow. Do not put any object
into the inlet grill or the exhaust opening as this may cause an electric shock or fire, or damage the heater.
Do not use on soft surfaces, such as a bed, where openings may become blocked.
Use only as described in this Dyson Operating Manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
In order to avoid overheating and fire hazard, do not cover the heater.
Choking hazard: the remote control unit contains a small battery. Keep the remote control away from children and do not swallow the battery. If the battery is swallowed
seek medical advice at once.
The heater should be positioned so the airflow is directed away from any walls or room corners.
Unplug when not in use for extended periods and before maintenance or servicing.

IMPORTANT SAFETY FEATURES
For your safety this heater is fitted with automatic cut-out switches that operate if the heater tips over or overheats. If the switches operate, unplug the heater and allow it to cool. Before restarting the heater, check and clear any blockages and ensure the heater is on a solid level surface.

READ AND SAVE THESE INSTRUCTIONS
THIS DYSON APPLIANCE IS INTENDED FOR HOUSEHOLD USE ONLY.

MARKING FOR NAME & CONTENT OF HAZARDOUS SUBSTANCES OR ELEMENTS

The table is complied in accordance to SJ/T 11364 standard.
O: Indicate that this hazardous substance contained in all of the homogeneous materials for this part is within the limit requirement in GB/T 26572.
X: Indicate that this hazardous substance contained in at least one of the homogeneous materials used for this part exceed the limit requirement in GB/T26572.
Hazardous substance contained is exempted under EU RoHS directives exemption list (2011/65/EU).
Disclaimer: The environment safe use period is declared based on the normal temperature & humidity used conditions.

Note 1: “O” Indicate that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
Note 2: “–” indicates that the restricted substance corresponds to the exemption.
Note 3: “Exceeding 0.1 wt%” and “exceeding 0.01 wt%” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition.

Controls

Clearing blockages

Ensure the heater is unplugged and has been allowed to cool.
Look for blockages in the air inlet holes and in the small aperture inside the air loop amplifier.
Use a soft brush to remove debris.

Cleaning

Unplug from the mains electricity supply. Allow to cool for 1 to 2 hours before cleaning if the heater has been in use. To clean, wipe with a dry or damp cloth. Do not use detergents or polishes.

Caution: hot when in use

This heater is hot when in use and for a short period after use.
Do not let bare skin touch hot surfaces.
If children are present, consider positioning the heater out of their reach.

Battery replacement

Battery type CR 2032. Press the end of the remote to release the battery.

USING YOUR DYSON HEATER
PLEASE READ THE ‘IMPORTANT SAFETY INSTRUCTIONS’ IN THIS DYSON OPERATING MANUAL BEFORE PROCEEDING,

OPERATION

The base must be fitted securely before operating. Do not dismantle or use without the base fitted.
The heater will not operate unless the target temperature is above the room temperature.
Each time the heating mode is selected, it conducts a short calibration cycle. Airflow will be automatically controlled during this cycle. Once the calibration cycle is complete, it will revert to the selected airflow speed.
The heater will not oscillate when the control buttons are pressed.
For your safety, this heater is fitted with automatic cut-out switches that operate if the heater tips over or overheats. If the switches operate, unplug the heater and allow it to cool. Before restarting the heater, check and clear any blockages and ensure the heater is on a solid level surface.
If power is interrupted an E1 failure message will be displayed. The heater will need to be turned off and then on again. If the problem persists, call the Dyson Helpline.
Do not carry out any maintenance or repair work other than that shown in this Dyson Operating Manual, or advised by the Dyson Helpline.
Do not lubricate any part of this heater.
As an auto-off feature, when in heating mode, the product will automatically cut out after 8 hours of use and will return to standby mode. To restart the machine, use the power button on either the remote control or on the appliance.

TILT FUNCTION
Carefully hold the base and the top of the air loop amplifier. Tilt forward or backward for the required airflow angle.

CLEANING

Turn the heater into stand by on/off mode.
Unplug from the mains electricity supply.
Allow to cool for 1 to 2 hours before cleaning if the heater has been in use.
To clean, wipe with a dry or damp cloth only.
Do not use detergents or polishes to clean the heater.

STORAGE

When not in use, unplug from the mains electricity supply.
Store the heater in a dry location and arrange the cable away from the traffic area so that it will not be tripped over or damaged.

BATTERY REPLACEMENTCAUTION:

Turn the heater into stand by mode and unplug from the mains electricity supply before replacing the battery.
Ensure the polarity is correct when installing the battery.
Do not attempt to dismantle or charge the battery. Keep away from fire.
Follow battery manufacturers’ instructions when installing new batteries (battery type CR 2032).

TROUBLESHOOTING

Remember: Always unplug from the mains electricity supply before inspecting for problems.
If the heater will not operate, first check the mains socket has electricity supply and that the plug is properly inserted into the socket.
If you are still experiencing problems, call the Dyson Helpline.

GUARANTEE TERMS and CONDITIONS

If you have any questions about your Dyson appliance, call the Dyson Helpline with your serial number and details of where/when you bought the appliance. Most questions can be solved over the phone by one of our trained Dyson Helpline staff. Alternatively, visit www.dyson.com for online help, general tips and useful information about Dyson.
If your Dyson appliance needs a service, call the Dyson Helpline so we can discuss the available options. If your Dyson appliance is under guarantee, and the repair is covered, it will be repaired at no cost.
Your serial number can be found on your rating plate which is on the base of the appliance. PLEASE REGISTER AS A DYSON APPLIANCE OWNER
To help us ensure you receive prompt and efficient service, please register as a Dyson appliance owner. This will confirm ownership of your Dyson appliance in the event of an insurance loss, and enable us to contact you if necessary.

LIMITED 2 YEAR GUARANTEE
TERMS AND CONDITIONS OF THE DYSON 2 YEAR LIMITED GUARANTEE

WHAT IS COVERED

The repair or replacement of your Dyson appliance (at Dyson’s discretion) if it is found to be defective due to faulty materials, workmanship or function within 2 years of purchase or delivery (if any part is no longer available or out of manufacture, Dyson will replace it with a functional replacement part).

WHAT IS NOT COVERED

Dyson does not guarantee the repair or replacement of a product as aresult of:

Accidental damage, faults caused by negligent use or care, misuse, neglect, careless operation or handling of the appliance which is not in accordance with the Dyson Operating Manual.
Use of the appliance for anything other than normal domestic household purposes.
Use of parts not assembled or installed in accordance with the instructions of Dyson.
Use of parts and accessories which are not genuine Dyson components.
Faulty installation (except where installed by Dyson).
Repairs or alterations carried out by parties other than Dyson or its authorised agents.
Damage from external sources such as transit, weather, electrical outages or power surges.
Failures caused by circumstances outside Dyson’s control.
Damage as a result of use not in accordance with the rating plate.
Blockages – please refer to the Dyson Operating Manual for details on how to look for and clear blockages.
Normal wear and tear, such as the battery.
Use of the appliance outside the country of purchase. If you are in any doubt as to what is covered by your guarantee, please contact Dyson.

SUMMARY OF COVER

The guarantee becomes effective from the date of purchase (or the date of delivery if this is later).
You must provide proof of (both the original and any subsequent) purchase/delivery before any work can be carried out on your Dyson appliance. Without this proof, any work carried out will be chargeable. Keep your receipt or delivery note.
All work will be carried out by Dyson or its authorised agents.
Any parts which are replaced will become the property of Dyson.
The repair or replacement of your Dyson appliance under guarantee will not extend the period of guarantee.
The guarantee provides benefits which are additional to and do not affect your statutory rights as a consumer.

ABOUT YOUR PRIVACY
Dyson may use this information for future marketing and research purposes (including sending commercial electronic messages) and may disclose it to third parties for the purposes of providing the services you have requested or to our business partners or professional advisers. If you wish to access your personal information or see our full privacy policy, please contact the Dyson Helpline.

DISPOSAL INFORMATION
Dyson products are made from high grade recyclable materials. Please dispose of this product responsibly and recycle where possible.
PRODUCT INFORMATION
Please note: Small details may vary from those shown.
Net weight: 2.43kg

FAQS

What’s new about the Dyson purifier range and how is it different from other purifiers?

Dyson engineers are perfectionists. Channelling our relentless dissatisfaction, we have re-engineered our latest’s purifiers to be fully sealed to HEPA H13 standard. Capturing 99.97% of ultrafine particles and preventing pollutants from leaking back into the air you breathe.

Why can’t I control the temperature or activate heating via the Dyson Link app?

This machine is compliant with safety standard UL 1278, as required by the US government. For this reason, heating and temperature control are not available in the Dyson Link app. Please use your machine’s remote control instead.

What is HEPA H13?

HEPA grades refer to filter efficiency at a certain particle size. HEPA H13 is a filter with a 99.95% removal efficiency of particles down to 0.1 microns per liter of air. Dyson filters also capture 99.97% of particles down to 0.3 microns in size including common pollutants such as allergens, bacteria, viruses, pollen, and mold spores.

How often should I replace my filter?

We recommend replacing the HEPA+Carbon filter roughly every 12 months, depending on how often you use it. That’s because over time filters can become clogged with pollutants and even let unpleasant odors back into the room. The machine will alert you when it’s time to change filters. A filter life reading can be found on the LCD screen and via the Dyson Link app.⁵

Will it heat a bedroom well in the winter, so that I can keep central air at 65 in winter, but maybe 70 in my bedroom?

Absolutely! My husband and I have one in our sizable master bedroom. The rest of our house will be around 62 and our bedroom stays 75 degrees all through the night.

Does this have wifi and connect to dyson app?

No, it has no Wi-Fi capabilities.