EDIFIER Bluetooth Active noise cancelling Stereo Headphones W380NB Manual

Bluetooth Active noise cancelling Stereo Headphones

Model: W380NB

Bluetooth® Active noise cancelling Stereo Headphones

www.edifier.com

Product Description and Accessories

There are different size of ear tips attached in the package, please select the suitable ones to wear.

Note: Images are for illustrative purposes only and may differ from the actual product.

Charge

During using, if only red light flashes, it indicates the headphones are at low battery level, please use them after fully charged.

Charging time: around 2.5 hours for a full charging
Red light lit = charging Red light off =fully charged
Rated input: 5V 500mA

Warning: The rechargeable batteries that provide power for this product must be disposed properly for recycling. Do not dispose of batteries in fire to prevent an explosion.

If not used for long periods of time, please charge the product with lithium battery at least once per three months.

Power ON/OFF

Noise Cancellation ON/OFF

Note: Noise cancellation is enabled by default when the headphones are powered on, and only at this time can this button achieve functions stated above.

Bluetooth Connection

When powered on and not connected, double press the multi-function button, wait until the red and blue light flashes alternately, then the headphones enter pairing state;
When powered off, press and hold the multi-function button for 5 seconds, wait until the red and blue light flashes alternately, then the headphones enter pairing state;
Set mobile phone to search and connect to “EDIFIER W380NB”, after pairing is successful, the blue light will flash slowly.

Connect to Two Bluetooth Devices Simultaneously

Pair the headphones with the first device;
Restart the headphones; press and hold the multi-function button for 5 seconds to enter pairing state and pair with the second device;
Operate the first device to pair with the headphones again, then they are successfully connected to two devices simultaneously.

Functional Operation Instructions

Music Playback

Call

Clear pairing records: when powered on and not connected, press and hold the “+” and “-” buttons simultaneously for 5 seconds, wait until the blue light flashes rapidly, then the pairing records have been cleared.

FAQs

Red light instead of blue light Flashes.

The headphones are at low battery level, please recharge the headphones.

Red light is off during charging.

Ensure the charging device is correctly connected with the headphones.
When the headphones have not been used for long periods of time, the battery will enter sleep state, it needs to charge about 30 minutes and then the red light will be lit.

No sound

Check if the headphones are operating.
Check if the headphones volume are at an appropriate level.
Check if the headphones are correctly connected with mobile phone.
Check if the headphones are operating within a normal working range.

The call quality of the headphones are not good.

Check if mobile phone is in an area with strong signal.
Please ensure the headphones are within effective distance (10m) and no obstacle between the headphones and mobile phone.

When playing music, cannot control pause/play/previous track/ next track via the headphones.

Please ensure the paired device support AVRCP (Audio Video Remote Control Profile) profile.

Maintenance

Keep the product away from humid places to avoid affecting internal circuit. Do not use the product during intense exercise or with much sweat to prevent sweat from dropping into the product to make damage.
Do not put the product in places exposed to sun or with high
temperature. High temperature will shorten service life of electronic
components, damage battery and make plastic components deformed.
Do not put the product in cold places to avoid damaging internal circuit board.
Do not dismantle the product. Non-professional personnel may damage the product.
Do not drop, strongly vibrate, strike the product with hard object to avoid damaging internal circuit.
Do not use drastic chemicals or cleaner to clean the product.
Do not use sharp objects to scratch product surface to avoid damaging shell and affecting facade.

NOTICE:
For the need of technical improvement and system upgrade, information contained herein may be subject to change from time to time without prior notice.

Products of EDIFIER will be customized for different applications.

Pictures and illustrations shown on this manual may be slightly different from actual product. Images are for illustrative purposes only and may differ from the actual product.