M1-S Pro Bluetooth Helmet Intercom Headset
Operation Manual
Attention
Thank you for purchasing FODSPORTS M1-S PRO Bluetooth stereo headsets. For best experiences, please read manual before use.
Sound volume warning
Long period or too loud may hurt hearing ability.
Disassemble or modification
The M1-S PRO is precisely made in the factory. Any disassemble or modification may damage the device. Please do not tear any of the safety regulation and serial number sticker from the device, that will void warranty. Please contact us at [email protected] if needed.
Warranty:
In normal use, we offer one year warranty from the date of purchase. Any disassemble, modification, will void warranty.
1. Outlook (e.g. M1-S PRO)
Functions
Switch On: When device is off, press intercom button and function button at samelimefor3 seconds.
Switch Off: When device is on, press intercom button and function button at samelimefor3
Power Detect: When device is on, short press volume”-‘ button and volume”+’ button at same time.
Voice control function {Only If your cellphone is equipped) : Short press function button once.
Switch on external wired device such as speed detector : when device IS on, long press volume•-• button and volume”+’ button at same time for 3 seconds.
Cellphone Function
Answering call: Short press function button once.
Hangup call : After call, short press function once.
Refuse call : After call, short press function button once.
Redial : Short press function button twice.
Volume up : Press volume’,” button while talking.
Volume down : Press volume”-” button while talking.
Switch manual/automatic answering calls : While in standby, press and hold the intercom button and volume ” +” / “-” button at the same time for 3 seconds.
Device Pair Up
Pairing mode : When device is on, long press function button for 5 seconds. Search mode When device is on, long press intercom button for 5 seconds. Remark, pairing mode is for pairing up to other devices like cellphone, gps Search mode is for pairing up with other Ml-S PRO.
Music Function
Play : When device is on, short press volume”+” button twice.
Pause : When music playing, short press volume”+” button twice.
Volume up : When playing music, short press volume”+” button once.
Volume down : When playing music, short press volume”: button once.
Play previous : When playing music, long press volume”+” button for 2 seconds.
Play next : When playing music, long press volume “-” button for 2 seconds.
Intercom Function
Switch intercom on : when device on : short press intercom button once.
Switch off : when talking, short press intercom button once.
Volume up : when talking, short press volume’,” button once.
Volume down : when talking, short press volume”, button once.
Special Function
Update mode : Plug in the Data & power cable, press volume “-” button and function button at same time for 5 seconds.
Memory clear : When device is on, press volume “+” button and function button at same time for 5 seconds.
2. Recharge
For first time use, please recharge the device until red light is off.
- Use data and power cable plug to the socket, connect to power source.
Bike usb chargers are not recommended, unsterilized circuit may damage the device. - When connecting to power source, red light appears in function button. When recharge complete, red light is off. Complete recharge is about 2 hours.
Low power notification
When power lower than 10%, Red light flash in the function button and voice message will remind power lower than 10%, please recharge immediately.
Power Detect Function
M1-S PRO has power detection function, when device is on, short press volume”-” button and volume”+” button at same time. Recorded voice message will remind
Power over 90%
Power over 50%
Power lower 50%
Power lower than 10% please recharge immediately
Voice control function( only if your cellphone is equipped): short press function button once
Switch on external wired devices such as speed detector … : when device is on, long press volume”-” button and volume”+” button at same time for 3 seconds.
3. On / Off
1. Switch on : long press function and intercom button at same time for
3 seconds. until blue light flash in function button. Voice message says “welcome to the Fodsports bluetooth communication system”.
2. Switch off : When the device is on, long press function and intercom button at same time for 3 seconds, until red light flash in function button. The device will detect power and voice message will says “power off’.
4. Pair Up To Different Devices
M1-S PRO can pair to different Bluetooth devices.
Pairing Mode
Search Mode
It’s search mode, voice message shows “Searching” sound.
5. Pairing With Cellphone
Remark, when pairing complete, please check both cellphone audio and media audio are all chosen, otherwise call or music can’t be processed.
6. Telephone Function
M1-S PRO is set to automaticity answer incoming calls, when incoming calls, beside rings, blue light flashes. Push function button to answer and push function button to hang up.
When talking, press volume”+” button and volume”-” button to adjust volume.
When the device is on, short press function button twice, will redial, blue light flashes.
*Only redial last call out number
7. Voice Command
When your M1-S PRO is paired up with your cellphone, when both device are on, short press function button once, will automatically switch on the voice command function
*Cellphone must be equipped with this function
8. Music Selections Functions
Play/Pause
Play music: When cellphone and M1 -S paired up, when both devices are on, short press volume”+” button twice, will play music.
Pause: When playing music, short press volume”+” button twice, will pause.
Previous
Long press volume”+” button for 2 seconds, will play previous music in your cellphone music list.
Next
Long press volume”-” button for 2 seconds, will play next music stored in your cellphone music list.
9. Wire Connecting
Long press volume”+” button and volume”-” button for 3 seconds.
M1-S PRO equipped with wire connection function in order to connect to devices without bluetooth. As long as the device is connected by 3.5mm aux out, all can transmit voice signal to M1 -S PRO.
When device wire connected by 2.5mm to 3.5mm cable to M1-S PRO, long press volume”+” button and volume”-” button for 3 seconds to switch on the connection.
* When wired mode is switched on, it will keep it on until switch off the M1-S PRO.
10. Operating Scenario 1:
One person use, pair to cellphone + Bluetooth GPS device + Bluetooth speed detector
*After M1-S PRO paired with gps, if don’t switch off gps’s bluetooth, its will interference the pairing when pairing to speed detector. Recommended to switch gps bluetooth off, after pair up to detector, switch the bluetooth back on.
11. Operating scenario 2:
Two persons intercom, and pairing to cellphone + Bluetooth GPS + speed detector or radio
Passenger Procedure:
Step 1: switch rider headset to search mode, passenger headset to pairing mode. When both headset stop red+blue light flashes, they are paired.
Step 2: switch rider headset to pairing mode, cellphone search this M1-S PRO and pair it up.
Step 3: keep riders headset in pairing mode, use bluetooth gps to search rider’s headset and pair it up.
Step 4: use 2.5mm to 3.5mm aux in to connect speed detector or radio to M1 -S PRO, and switch M1-S PRO to Wire Connecting, all audio integrade complete.
Please read STEP 9. For Wire Connecting.
12. Operating Scenario 3:
Two persons intercom, rider using cellphone + Bluetooth GPS passenger using Bluetooth Speed detector
Pairing Procedure
Step 1: switch rider headset to search mode, passenger’s headset switch to pairing mode, when red and blue light stop flash, intercom pairing complete. At same time instantly switch on intercom.
Step 2: Set rider headset to pairing mode, use cellphone to search rider’s headset to complete pair up.
Step 3: set rider’s headset to pairing mode, use bluetooth gps to search rider’s headset and complete.
Step 4: set passenger’s headset to pairing mode, use Bluetooth speed detector to search passenger headset and complete pair up.
13. Multiple Intercom
Multiple intercom pairing procedure
*Numbers of device which the headset can be paired 8 x M1-S PRO (A, B, C D}, multiple intercom connections, the connection will occupy channels, thus only unit A can connect to the other two Bluetooth devices, the others B, C, D can only connect to one Bluetooth device.
M1-S PRO equipped multiple intercom function, support 8 units talk same time,but recommended 4-6 units,pairing procedure as follow.
Step 1: switch on both A and B unit, long press A unit intercom button to search mode, Then long press unit B function button to pairing mode. When blue light on both intercoms, pairing complete.(You should press the intercom button on B unit to end the talking if you need to pair with more than 2 units.in order to new pairing later)
Now A and B unit pairing complete.
Step 2: When B C units on power on status. long press unit B intercom button to search mode, Then long press unit C function button to pairing mode. When blue light on both units, pairing complete.(You should press intercom button on B units if you need 3 units talk same time, then 3 units will light on blue same lime. Or you should press intercom button on C unit to end the talking if you need to pair with more than 3 units)
Three unit pairing complete.
Step 3: When C D units on power on status, Long press unit C intercom button, then long press unit D function button. When blue light on both units, pairing complete.(You should press intercom button on B C units if you need 4 units talk same lime, then 4 units will light on blue same time. Or you need to press intercom on D unit to end the talking if you need to pair with more than 4 units) Pis repeat above steps if you need to pair with 5 or 6 or 7 or 8 units.
Four units pairing complete.
*Interruption
In multiple intercom mode, if there is an incoming call caused one of unit away from the connection. After call, will reconnected automatically. If interruption is caused by distance or bad signal. Please press intercom button to reconnect.
Multiple intercom reconnect procedure
M1-S PRO will remember paired units. But after switch off and want to reconnect again, please follow the procedure.
Step 1: switching off all four units and all bluetooth device connected to the headset.
Step 2: switch on C and D unit, press C unit intercom button to connect to D unit.
Step 3: switch on B unit, press B unit intercom button to connect to C and D unit.
Step 4: switch on A unit, press A unit intercom button to connect to B, C and D unit. After all four unit reconnected, switch on original connected bluetooth devices.
14. QandA
Q1 : No sounds from one or two side speaker.
A1 : Check device plug, needs to firmly connected.
Q2 : Can it be recharged from bike USB charger while riding?
A2.1 : Not recommended, unstablized power source will cause damage on internal circuit, may cause unable to recharge/can’t fully charged/can’t switch on.
A2.2 : Power bank is a good choice.
Q3 : When using radio, not transmission or continuous transmission.
A3 : Pis check whether plug the 2.5mm pin deeply enough. this pin built in waterproof parts, It is easily misunderstand it have been pluged well because of a little resistance.
Q4 : New device can’t switch on.
A4 : Recharged at least 30mins before use.
FAQs:
Frequently Asked Questions
Why are my two speakers or one side speaker unavailable/no sound?
A: 1. Please check if the headphone cable is inserted in the correct direction.
2. Please make sure the headphone cable is fully inserted into the interface.
Why is my microphone unavailable/no sound?
The microphone part is detachable and can replace the soft/boom microphone, so please check if this part is inserted tightly.
2. Please check if the headphone cable is inserted in the correct direction.
Why are my speakers volume low?
Different locations of speakers will cause differences in volume, please install the speaker as close to your ears as possible. If the distance is too far, the volume will be reduced. You can use the thickened pad in the package to achieve it.
Why is the volume of the intercom really low?
Please note that both the volume of the intercom or the volume of listening to music can be adjusted with the volume +- button, if you think the intercom volume is too low, you can press “+” button to increase the intercom volume.
Technical Specification
| Manufacturer | Fodsports |
| Brand | FODSPORTS |
| Item Weight | 40g |
| Product Dimensions | 4cm*2.5cm*8cm |
| Item model number | M1-S Pro |
| Batteries | 900 mAh battery |
| Manufacturer Part Number | M1-S Pro |
| Maximum Number of Speakers | |
| special Features | |
| Max number of speakers | |
| Reminder | |
| Handsfree Bluetooth Headset | |
| Waterproof | |
| Bluetooth and chips: | |
| Maximum Intercom Distance | |
| Stereo Music/Audio | |
| Applicable Helmet Type |
