Loading manuals...

Govee RGB LED Strip Lights H613D Manual


Page 2 of 2 « Previous

Installing Your Device

Before You Install

Unpack the box and check all items listed in the packing list. Power on the strip light and check whether it lights up.

Installing Steps

Installing steps 1 to 4

Pairing Your Device with the Govee Home App

What You Need

  • A smartphone or tablet running iOS 8.0 (or above) or Android 4.3 (or above).

Pairing Instructions

  1. Download the Govee Home app from the App Store (iOS devices) or Google Play (Android devices).
  2. Turn on Bluetooth on your smartphone.
  3. Open the app, tap the “+” icon in the top right corner and search for “H613D”.
  4. Tap the device icon and follow the on-screen instructions to complete pairing.
App store logos
App Store or Google Play

Specifications

Specifications table

Troubleshooting

  1. The adhesive tape is not strong enough.
    • Make sure the installation surface is clean and dry.
    • Firmly press over the strip after sticking.
  2. Cannot connect to Bluetooth.
    • Do not skip Bluetooth connection in the app.
    • Ensure Bluetooth on your smartphone has been turned on.
    • Your smartphone may be incompatible with the Govee Home app. Try using a different smartphone then reconnect.
    • Power the strip lights and your smartphone Bluetooth off then on, then try again.
    • Ensure that your smartphone is within 1m/3.28ft of the strip lights when connecting.
    • Clear any obstructions that are between the strip lights and your smartphone.
  3. The strip lights does not display the full selected color/Some LED beads do not light up.
    • Please contact the Govee support team for rapid product replacement.
  4. Cannot sync the strip lights to the beat of my music.
    • Move the control box closer to the music source.
    • Clean the mic on the control box then try again.

Customer Service

  • Warranty: 12-Month Limited Warranty
  • Support: Lifetime Technical Support
  • Official Website: www.govee.com

Social media handles

FCC Statement

This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  1. Reorient or relocate the receiving antenna.
  2. Increase the separation between the equipment and receiver.
  3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  4. Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Non-replaceable light source
Not intended for illumination. Only used for creating ambiance.

  1. Do not connect the rope light to the supply while it is in the packing or wound onto a reel;
  2. Do not use the rope light when covered or recessed into a surface;
  3. Do not open or cut the rope light

Responsible party :

  • Name: GOVEE MOMENTS(US) TRADING LIMITED
  • Address: 13013 WESTERN AVE STE 5 BLUE ISLAND IL 60406-2448
  • Contact information: https://www.govee.com/support

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Shenzhen Intellirocks Tech. Co., Ltd. is under license.

Govee is a trademark of Shenzhen Intellirocks Tech Co.,Ltd. Copyright ©2021 Shenzhen Intellirocks Tech Co.,Ltd. All Rights Reserved.

App QR code

For FAQs and more information, please visit: www.govee.com


More Manuals From Govee