HALO Bassinest swivel sleeper Manual

HALO Bassinest Swivel Sleeper Instruction Manual

Adult assembly required. Keep small parts away from children. Styles and colors/colours may vary.

Electronics panel not available on Essentia models.

IMPORTANT: Read all instructions before assembly and use of this product. Keep instructions for future reference.

Recommended for infants up to 20 lbs.

Tools required: #2 Phillips screwdriver (not included)

Batteries required: 3 AA (not included)
Not required on Essentia series.

WARNING!

FAILURE TO FOLLOW THESE WARNINGS AND THE INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

Read and follow instructions before assembly and use. If you do not have instructions, DO NOT use this product. Call 1-888-999-HALO or visit www.Halosleep.com.
Before each use, inspect the HALO Bassinest® swivel sleeper for damaged hardware, loose or missing components or sharp edges. DO NOT use the Bassinest swivel sleeper if any parts are missing or broken. Contact or write HALO Innovations, Inc. for replacement parts and instructional literature if needed. DO NOT substitute parts.
Discontinue use of this product when the child is showing signs of being able to pull up, rollover, push up or sit up unassisted, or is able to move out of the security of the walled sleep area.
Never leave child unattended.
This product is not intended to be resold after use or returned to a retailer. Due to safety concerns, HALO Innovations, Inc. cannot be held responsible for any product that has been resold after use or returned to a retailer.

FALL HAZARD

To help prevent falls, do not use this product when the infant begins to push up on hands and knees or has reached 20 pounds, whichever comes first. Always check that the bassinet is securely locked on the base/stand by pulling upwards on the bassinet bed.

SUFFOCATION HAZARD–INFANTS HAVE SUFFOCATED:

In gaps between extra padding and side of the bassinet/cradle/crib.
On soft bedding.
Use only the pad provided by manufacturer. NEVER add a pillow, comforter, or another mattress for padding.
NEVER place additional objects in the Bassinest swivel sleeper.
ALWAYS ensure the pad is positioned correctly. Do not create any pockets between the pad and mesh sides.
To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise advised by your physician.
If a sheet is used with the pad, use only the one provided by the bassinet, crib or cradle manufacturer or one specifically designed to fit the dimension of the bassinet, crib or cradle mattress.
Never use plastic shipping bags or other plastic film as a mattress cover not sold or intended for that purpose. They can cause suffocation.
Discard all plastic packing materials immediately after opening.
Product is designed and is approved for use with one baby only. Do not use with more than one child at a time.

STRANGULATION HAZARD

Strings can cause strangulation! DO NOT place items with a string around a child’s neck, such as hood strings or pacifier cords. DO NOT suspend strings over a bassinet/crib/cradle or attach strings to toys.
DO NOT place the Bassinest swivel sleeper near a window or patio door where cords from blinds or drapes can strangle an infant.

INJURY HAZARD

Never place more than one infant to sleep in the Bassinest swivel sleeper.
Never carry the Bassinest swivel sleeper with an infant in it.
Young children should not be allowed to play unsupervised in the vicinity of the Bassinest swivel sleeper
Always remove child from the Bassinest swivel sleeper before adjusting height.
When using Bassinest swivel sleeper sleep area on the base, always ensure that the sleeping area is secure to its base before use.
The Bassinest swivel sleeper should be placed on a horizontal floor.
Not for use in an automobile.
Be aware of the risk of open fires and other sources of strong heat, such as electric bar fires, gas fires, etc. in the near vicinity of the Bassinest swivel sleeper.
Do not place anything in the Bassinest swivel sleeper to elevate the mattress. The American Academy of Pediatrics states that elevation can result in the infant sliding to the foot of the crib into a position that might compromise respiration and is therefore not recommended.

HALO BASSINEST® SWIVEL SLEEPER – ASSEMBLY INSTRUCTIONS – IMPORTANT!

Please keep these instructions for future reference. Please read these instructions before assembly and use of this product.

Adult assembly required.
Tools not included.

Remove contents from carton and discard all packaging.
Electronics panel and screws not included on Essentia models.

Using a #2 Phillips screwdriver attach legs to underside of base using 8 new large screws provided. Tighten securely.

Assemble the sleep area by fully opening the top flaps and side panels to expose the railing poles. Start by attaching railing marked “A” into sidewall opening marked “A”, and push together until spring pin engages. Repeat process with remaining railings and sidewall openings. Note that only one rail and sidewall connection will have a letter indicator.

Railing “clicks” when properly assembled.
Pull on railing to ensure it is properly locked in place.

It is necessary to detach fabric cover from fastener strip before inserting sidewall.
Slide bottom of sidewall into opening in base. Repeat on other side.
Sidewall “clicks” when properly installed. Pull on sidewall to ensure it is properly locked in place.

On both ends of the Bassinest fold the fabric cover over the sidewall and secure using the fastener strip. Then fold the fabric flaps over top and bottom of sidewall and attach using the fastener tabs.

Install batteries in Soothing Center.
(Not on Essentia models).

Attach Soothing Center to the bottom of the sleep surface using the small screws provided. Tighten securely.
(Not on Essentia models).

Attach sleep area to base. Check to make sure no red stripe is visible on the post to confirm correct assembly.

Add Mattress: Mattress comes with coordinated fitted sheet.
Please remove and wash sheet before use. Use only mattress and sheet especially designed for the Bassinest swivel sleeper.
DO NOT machine wash the mattress – instead wipe the surface clean with a damp cloth.

USE INSTRUCTIONS

To adjust height: Place by bed so that two legs are parallel to the side of the bed and one leg is under the bed. Release adjustment lever. Pull up on Bassinest bed to increase the height or push down on bed to lower. When bed is at desired height, close adjustment lever. Never adjust bed height with your baby in the bed.

To unlock retractable wall: On both ends of the Bassinest swivel sleeper, slide locking mechanisms out of sidewall notches as shown until front wall moves freely. It is not necessary to remove the fabric covering to access the locks. NOTE: If lock is difficult to use, lift up on retractable wall slightly and adjust lock as desired.

To use retractable wall: Push down gently on front railing. Retractable wall automatically returns to its upright position when pressure is removed.

To lock retractable wall: On both ends of the Bassinest swivel sleeper, slide locking mechanisms into sidewall notches as shown until front wall is immobilized.

To remove bed from base: Push and hold release button while lifting to remove from post. Never remove sleep area from base with your baby in the bed. Never use sleep area when not attached to Bassinest base.

To use storage pockets: Pull elastic band at top of pocket to open. Insert items for storage and easy access. Release to close. Do not store sharp objects or objects weighing more than 5 lbs.

To move the Bassinest swivel sleeper: DO NOT attempt to move the Bassinest with your baby in the Bassinest. First remove the bed from the base or post. Move the base to the desired location and reattach the bed. Do not try to move the Bassinest swivel sleeper by lifting, pulling or pushing the bed while it is attached to the base or post.

SOOTHING CENTER OPERATION

(NOT AVAILABLE ON ESSENTIA MODELS)

NOTE: TO OPERATE, THREE (3) AA BATTERIES MUST BE INSTALLED.
SEE ASSEMBLY INSTRUCTIONS FOR MORE INFORMATION.

PREMIERE Model

(A) Floor Light: Activate the floor light by pushing the downward-facing bulb button. To turn off, push the button a second time. If not turned off manually, the floor light will automatically shut off after 15 minutes.
(B) Nightlight: Activate nightlight by pressing upward-facing bulb button. Press a second time to increase brightness. Press a third time to turn off. If not turned off manually, light will automatically shut off after 15 minutes.
(C) Soothing Sounds: Activate soothing sounds by pushing the play button. Press play button multiple times to cycle through sound options (heartbeat, white noise, babbling brook, rainforest). Press a final time to turn off soothing sounds. If not turned off manually, soothing sounds will automatically shut off after 30 minutes.
(D) Volume: Press for Low volume. Press a second time for High volume. Press a third time to turn off soothing sounds. If not turned off manually, soothing sounds will automatically shut off after 30 minutes
(E) Vibration: Activate vibration by pushing the vibration button. Press a second time for stronger vibration. Press a third time to shut off. If not turned off manually, vibration will automatically shut off after 30 minutes.

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.

HALO BASSINEST® SWIVEL SLEEPER – CARE AND MAINTENANCE INSTRUCTIONS

Remove the sheet from the mattress and wash the sheet before use.
The sheet is machine washable. Machine wash in warm water with like colors/colours. Do not use bleach. Tumble dry on low setting.
The Bassinest swivel sleeper base, sleep area and mattress should be cleaned regularly by using a mild cleaning solution and a damp cloth. Do not use bleach. Do not machine wash mattress. Do not use harsh or abrasive cleaners. Rinse clean with water to remove residue. Allow to dry completely before replacing sleep pad and/or use.
When not in use: clean unit as instructed. Store in a clean, dry location. Do not store outdoors or in a damp environment.
Do not attempt to unscrew the sleep surface board or remove the lining cover from the board. This is not meant to be disassembled.
If there is a large spill, spray a mixture of vinegar and water into the sides and wipe under the lining cover as much as you can until the spill or odor is gone. Let the top air dry before use.
Do not submerge the Bassinest sleep surface board or walls in water.

BATTERY SAFETY INFORMATION (BATTERIES NOT INCLUDED)

In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:

Do not mix old and new batteries or batteries of different types: Alkaline, standard (carbon zinc), or rechargeable (nickel-cadmium).
Insert batteries as indicated inside battery compartment.
Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of product in a fire. The batteries inside may explode or leak.
Never short-circuit the battery terminals.
Use only batteries of the same or equivalent type as recommended.
Do not charge non-rechargeable batteries.
Remove rechargeable batteries from the product before charging.
If removable, rechargeable batteries are used, they are only to be charged under adult supervision.

WARRANTY

The HALO Bassinest® swivel sleeper is covered by a 1-year limited warranty.
Visit www.halosleep.com/halo-bassinest-1-year-limited-warranty/ for details.

CUSTOMER SERVICE

: Please contact your retailer.
: Please contact HALO.
Our friendly, specially trained support team will be happy to assist you with any concerns you may have regarding your new HALO Bassinest® swivel sleeper.