Honeywell Home RTH9585WF1004 Wi-Fi Smart Color Thermostat
view all Honeywell thermostat manual
Quick reference: home use
Connecting to your Wi-Fi network
- If thermostat is asking if you want to connect to a Wi-Fi network, touch Yes. If thermostat is not asking if you want to connect to a Wi-Fi network, Touch MENU > Wi-Fi Setup.
- Touch the name of the network you want to use. The thermostat displays a password page.
- Using the keyboard, touch the characters that spell out your home network password.
NOTE: If your home network is not shown on the list, touch Rescan. - Touch Done. The thermostat displays “Connecting to your network. Please wait…” then shows a “Connection Successful” screen.
- Touch Next to display the registration information screen.
- Note your Thermostat MAC and Thermostat CRC. You need these numbers to complete online registration.
Disconnecting your Wi-Fi network
If you need to disconnect the thermostat from your Wi-Fi network (for example, you’re replacing your router), follow these steps:
- Touch MENU.
- Select Wi-Fi Setup.
- Touch Disconnect from Network. The thermostat will display a question to confirm your selection.
- Touch Yes to confirm that you want to disconnect from the network.
- Touch OK to display the menu.
Reconnecting your Wi-Fi network
- Touch MENU.
- Select Wi-Fi Setup.
- Touch the name of the network you want to use. The thermostat may display a password page.
- To enter a password, touch characters to spell out your home network password, then touch Done.
- The thermostat displays “Connecting to your network. Please wait…” then a “Connection Successful” screen.
- Touch Next.
- If your thermostat is registered, you will see your signal strength and other status information. Touch Done.
- If the screen displays “Register Online for Remote Access,” follow instructions in 69-2814EFS.
Setting the time/date
- Touch the current time. The screen displays Set Time/Set Date.
- Touch Set Time or Set Date.
- Touch p or q until the proper time/date is displayed.
- Touch Done to save or Cancel to ignore changes.
Setting system mode
- Touch SYSTEM to display system settings.
- Touch desired option: Heat, Cool, Off, Automatic, Emergency Heat (heat pumps with aux. heat).
- Touch Done to save and exit.
NOTE: The Automatic and Emergency Heat system settings may not appear, depending on how your thermostat was installed.
Adjusting program schedules
- Touch MENU.
- Select Create/Edit Schedule.
- Touch View/Edit to view the full schedule and make a quick adjustment.
- Touch Guide Me to create a schedule by answering simple questions.
Product Manuals
Search online for Resideo 33-00269 for the User Guide.
Videos
Search online for Smart Thermostat 9000.
Need Help?
For assistance please visit http://honeywellhome.com
CAUTION: Equipment damage hazard
To prevent possible compressor damage, do not operate cooling system when outdoor temperature is below 50°F (10°C).
This thermostat contains a Lithium battery which may contain Perchlorate material. Perchlorate Material— special handling may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
Troubleshooting
If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and easily.
Display is blank
- Check circuit breaker and reset if necessary.
- Make sure power switch at heating and cooling system is on.
- Make sure furnace door is closed securely.
“Wait” appears on the screen
- Compressor protection feature is engaged. Wait 5 minutes for the system to restart safely, without damage to the compressor.
Heating or cooling system does not respond
- Touch SYSTEM to set system to Heat. Make sure the temperature is set higher than the Inside temperature.
- Touch SYSTEM to set system to Cool. Make sure the temperature is set lower than the Inside temperature.
- Check circuit breaker and reset if necessary.
- Make sure power switch at heating and cooling system is on.
- Make sure furnace door is closed securely.
- If “Wait” is displayed, the compressor protection timer is on. Wait 5 minutes for the system to restart safely, without damaging the compressor (see page 16 in 33-00269).
Resideo Technologies, Inc.
1985 Douglas Drive North, Golden Valley, MN 55422
33-00538EFS—01 M.S. 05-20 | Printed in United States
©2020 Resideo Technologies, Inc. All rights reserved.
The Honeywell Home trademark is used under license from Honeywell International, Inc.
This product is manufactured by Resideo Technologies, Inc. and its affiliates.