KMART Balance Bike
Instruction Manual
Congratulations in purchasing Kmart balance bike. The aim of the balance bike is to assist in the development of your child’s balance, coordination, and steering, as well as to build strength and motor skills. Your child will be able to learn how to ride with ease.
Please pay attention to the following safety guidelines.
Important Safety Information:
- Recommended for children 2 years+.
- Check all parts are in good condition and that screws and tyres are tightened correctly.
- Protective gear should always be worn when riding any bike (helmet, protectors for knees, elbows and wrists).
- Always ensure that appropriate footwear is worn whilst riding this bike.
- Maximum weight is 20kgs
- Only one person to ride this bike at any given time
- This bike is not intended for stunting or tricks.
- Do not use on roadways, always ride in a safe environment such as a park or private property.
- This balance bike is not constructed for uneven paths, stairs, steep hills, or other rocky surfaces, Damage may be done to the bike and to the rider. Only use on flat surfaces.
- Adult supervision is required at all times.
- Check the child’s feet can rest on the ground whilst astride the balance bike by adjusting the seat height before allowing child to ride this bike.
- Parents or carers should ensure that children are properly instructed in the use of the balance bike.
Maintenance
- Clean with a soft cloth and a little water with washing liquid.
- The product must not be stored in places with high temperatures, intensive sunlight, excessive dust and must be kept dry.
WARNING: Item to be assembled by an adult only. Choking hazard contains small assembly components with functional sharp points and edges.
FOR AU/NZ: IMPORTED FOR KMART
STORES IN AUSTRALIA AND NEW ZEALAND.
FOR USA: IMPORTED BY ANKO RETAIL INC.
19500 ALDERWOOD MALL PARKWAY
LYNNWOOD WA 98036 USA.
MADE IN CHINA
| Packing list |  Push the stem into the front tube down to the Packing list marker. Fix the screw tightly so the handle bar AckIng Ils stem is secured tightly and will not move. |
 Push the seat post into the seat tube until it reaches the marker. Fix the screw tightly so the saddle doesn’t move. |
 Turn bike upside down and rest the handlebars on the floor. Set the front wheel between the forks and fix the screw tightly. The safety pins of the washer must be placed in the designated hole. |
 Bike is now assembled. Check and maintain tightening of screws on a regular basis. |
Tools needed: 14mm wrench(not included in the packing list) |
