MONOPRICE 2 Outlet 57-Watt USB-C Power Strip
This 2-Outlet 57-Watt USB-C® Power Strip features two AC power outlets, one USB Type-C® port, and two USB Type-A ports. The USB-C® port can provide up to 45 watts of Power Delivery (PD) 3.0, while the Type-A ports can delivery a total of 2.4 amps/12watts of Battery Charging (BC) for mobile devices. The AC outlets support up to 10 amps/1250 watts of power to connected AC devices.
- Two AC power outlets rated for a total of 10 amps/1250 watts at 125 VAC
- USB-C® port supports up to 45 watts of Power Delivery (PD) 3.0
- Two USB Type-A ports support a total of up to 2.4 amps/12 watts of Battery Charging (BC) for mobile devices
- Accurate limited current output
- Over current, short circuit, and over temperature protection circuits with auto recovery
- Overload and over voltage protection
- Intelligent LED for PD charging
Monoprice is pleased to provide free online support. For order related issues, contact the Customer Service department through the Live Chat link on our website www.monoprice.com or via email at [email protected]
For technical issues, contact the Technical Support department through the online chat button on our website www.monoprice.com or by sending an email to [email protected]
Check the website for support times and links.
Please take an inventory of the package contents to ensure you have all the items listed below. If anything is missing or damaged, please contact Monoprice Customer Service for a replacement.
- 1x 2-Outlet 57-Watt USB-C® Power Strip
- 1x Quick User’s Guide
|Input Power||125 VAC, 60Hz|
|Outputs||2x AC, 1x USB Type-C®, 2x USB Type-A|
|AC Output Power||125 VAC, 60Hz, 10 amps/1250 watts|
|USB Type-C Output Power||5V/3A, 9V/3A, 12V/3A, 20V/2.25A|
|USB Type-A Output Power (total)||5 VDC, 2.4A|
|Over Current Protection||Yes|
|Over Voltage Protection||Yes|
|Short Circuit Protection||Yes|
|Over Temperature Protection||Yes|
|Ripple and Noise||≤ 200mV|
|Line Regulation||± 5%|
|Operating Temperature||+32 ~ +77°F (0 ~ +25°C)|
|Storage Temperature||-4 ~ +185°F (-20 ~ +85°C)|
|Operating Humidity||20 ~ 90% RH, noncondensing|
|Storage Humidity||5 ~ 95% RH, noncondensing|
|Dimensions||ø4.2″ x 1.2″ (ø106 x 30 mm)|
Notice for FCC}
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Modifying the equipment without Monoprice’s authorization may result in the equipment no longer complying with FCC requirements for Class B digital devices. In that event, your right to use the equipment may be limited by FCC regulations, and you may be required to correct any interference to radio or television communications at your own expense.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Notice for Industry Canada
This Class B digital apparatus complies with Canadian ICES-003.