MODEL: MAMP1
Home Theater-Stereo System, Wireless Connection, MP3/USB/SD Readers, FM Radio, Power amplifier
USER MANUAL
Please read these operating instructions carefully before use.
They will acquaint you fully with its features.
This product adopts highly advanced digital techniques, high powered, four-channel outputs to be the media center of your living room. It includes an AM/FM tuner, MP3/wireless connection input headphone jack. This hybrid amplifier also has sub-out and pre-outs for a variety of applications.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK. DON’T EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.
THIS DEVICE IS INTENDED FOR CONTINUOUS OPERATION!
*Designs and specifications are subject to change without notice.
FEATURES
- PRE-Amp with FM Tuner
- CPU management of all functions, remote sensor digital fluorescent output displays all the functions
- Separate gain control of pre-amp
- FM Quartz synthesized Tuner, auto station seek and store, 30 stations storage, with both manual and automatic tuning
- Wireless connection/MP3 Input
- Digital karaoke system
- Overheat, over current protection
- Wireless connection receiver features that make listening to music more convenient Before you can use a wireless connection device, it must be paired and connected. Make sure that Wireless receive is activated on your device before you begin the If you need a username, please search for the wireless connection network name: Moukey MAMP1
PRECAUTIONS
- Power Source: The unit should be connected to a power supply AC-115/60Hz, AC-230V/50Hz.
- Ventilation: The unit should be situated so that its location or position does not interfere with its proper ventilation. Place the unit at least 10cm away from the walls.
- Water and moisture: The unit should not be used near water-for example, near a swimming pool, in a wet basement, etc.
- Electric Shock: If a metal objects, such as a hair pin or a needle, comes into contact with the inside of this appliance, a dangerous electric shock may result. For families with children, never permit children to put anything, especially metal, inside this unit.
- Enclosure Removal: Do not open the unit as this might result in damage to the circuitry or electrical shock. If a foreign object should get into the unit, contact your dealer or service company.
- Abnormal Smell: If an abnormal smell or smoke is detected, immediately turn the power OFF and pullout the power cord. Contact your dealer or nearest service station.
Fm remote operations steps:
- Press TUNER MODE on the remote control
- Pres MODE, and select FM
- Press PRE/NEXT to select the stations you don’t want to keep;
- Press AUTO to automatically search
OPERATION
- POWER
Use this button to turn ON or OFF the speakers.
Caution: Make sure that all connections are properly connected and the main volume is set to minimum level before turning ON the unit. - INPUT SELECT
Select the input source: CD/DVD, USB, Wireless Connection - MICROPHONE VOLUME: MIC VOL
Adjust “MIC VOL” knob to increase or decrease the karaoke volume - ECHO
Adjust “ECHO” to get a satiable echo e_ect. - TREBLE/BASS
Turn TREBLE/BASS knob to adjust treble/bass tone master channel. - MASTER VOLUME
You can adjust MASTER VOLUME from turning the right volume up, turn the left volume down.
CONTROLS and FUNCTIONS FRONT PANEL
- HEADPHONE JACK: Headphone connect to this jack.
- MIC INPUT JACKS 1 KARAOKE MIC: Connect to these jacks.
- MIC INPUT JACKS 2 KARAOKE MIC: Connect to these jacks.
- MIC VOLUME: Adjusts the volume level. Turn the knob clockwise to increase the MIC volume .
- ECHO CONTROL: Turn the knob to adjust the MIC echo level.
- BASS: Turn BASS knob to adjust bass tone master channel.
- TREBLE: Turn TREBLE knob to adjust treble tone master channel.
- BALANCE: Master balance knob
- AUDIO INPUT JACKS: Connect the audio output jacks of AUX to these jacks.
- INPUT: This is used to select the input sources: DVD/CD/AUX/MP3/Wireless Connection/FM
- POWER SWITCH: Press to switch the power unit ON or OFF.
- USB/SD: Card input
- MODE: This is used to select the input sources MP3/Wireless Connection/FM
- W: This is used to select the input sources Wireless Connection
- PREV: Used to select the Previous station which has been kept in the system
- PLAY/PAUSE: play/pause song button on USB/SD card
- NEXT:Used to select the next station which has been kept in system
- FUNCTION DISPLAYED LED WINDOW
- FOLDER/TRACK: This is used to select the mp3 prev/next
- MASTER VOLUME CONTROL: Adjusts the volume level. Turn the knob clockwise to increase the volume.
BACK PANEL FUNCTIONS
- AUDIO INPUT JACKS: Connect the audio output jacks of DVD to these jacks.
- AUDIO INPUT JACKS: Connect the audio ouput jacks of CD to these jacks.
- LINE: LINE OUTPUT JACKS:Connect the RECORD input jacks to these jacks.
- TUNER ANT: Connect for FM antennas.
- SPEAKER OUTPUT TERMINALS:Connect your speaker system to these terminals.
- 115/230 SWITCH: According to power voltage,push this button to the station of the 115V or 230V.
- POWER CORD: Connect to AC 115V/60Hz & 230V/50Hz
REMOTE CONTROL
When the panel output knob is adjusted to MP3 / W gear, the remote control function will work
- Under the mode of USB/FM/W mode -press this key to TURN ON /OFF
- MODE: press the “MODE” to change the model (USB →FM→ W)
- In the model of USB or SD playing,press this key you can get three functions: “ONE” is Single song loop ; “ALL” is all the song loop ; cancel loop
- FM ch-:Next channel in FM mode
- Equalizer: Under USB,W, FM playback, press this key to loop 5 kinds of equalizer effects
- FM ch+: Previous channel in FM mode
- Previous song in USB/W mode
- Under USB/W playback,press this key one time is a pause,press again will recover Under FM playback,press this key to search channel automatically.
- Next song in USB/W mode
- Decrease volume in USB.W.FM mode
- Increase volume in USB.W.FM mode
The function of digital key
In USB or FM mode, digital buttons can quickly select music and radio stations.
For example: to select the first song in USB, press 01; if you want to select the first radio station (after it has been automatically searched), press 01.
Remote Controller operation
- The remote controller should be operated within 6 meter and the scope of 30° in front of receiver.
- Make sure that there is no big obstacle between remote controller and machine.
- The remote sensor should be far away from the light, high amounts of light can affect its performance.
SAFETY INSTRUCTIONS
- Make sure that all connections are properly connected and the main volume is set to minimum level before turning ON the unit.
- When more than one pair of speakers are used, (specially the main speaker output) make sure that the speakers used are of the same wattage and impedance, otherwise the unit maybe damaged under high power or long-term operation.
- To avoid humming sounds and unwanted noise, make sure that all the wires are properly inserted.
- For speaker cords, strip off the vinyl coating and twist the wire tip. Push down the pink jack or loosen the screw terminal, before inserting the wire tip, then fasten it and tighten the screw. Be careful not to let the wires stick out of the terminal otherwise this may cause short circuit when wires of different terminals contact each other.
- After the unit is turned ON, adjust the main volume to the desired level same with bass and treble volume, etc.
Features:
- Home Theater Amplier Receiver System
- Ability to Connect External Devices & Speakers
- Built-in Wireless receive for Wireless Music Streaming
- MP3 Digital Audio File Support
- USB Flash & SD Memory Card Readers
- FM Radio with LED Display
- (2) 1/4’’ Microphone Inputs
- RCA (L/R) Audio Input/Output
- Banana Binding Post Speaker Output Jacks
- Front Panel Button Control Center
- Echo, Bass, Treble, Sub, Mic Volume Adjustable
- Includes Remote Control & Power Cable Wireless Connection Connectivity:
- Instantly Receives Wireless Music Streaming
- Works with all of Your Favorite Devices (iPhone, Android, Smartphone, iPad, Tablet, etc.)
- Wireless Connection Version: 5.0 Wireless connection name: Moukey MAMP1 Technical Specs:
- Peak power : 110 x 2 watts
- Frequency Response:20Hz-20KHz(+/-2dB)
- T.H.D.: <1%
- Signal-to-Noise Ratio: 80dB
- Input Sensitivity: 400mV Aux, 6mV Mic
- Radio Station Memory: 30 Presets
- Maximum USB/SD Card Support Size: Up to 32 GB
- Digital Media File Support: MP3, WMA,WAV,FLAC,APE.
- Power: 115/230V, Switchable
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.