Ninja Cooking cheat sheet
Installing and removing the pressure lid
Place the pressure lid on top of the unit with theon the lid and the on the base lined up evenly. Turn the lid clockwise until it locks in place. To unlock the pressure lid,
turn it anticlockwise. Lift it up and away from you, as some steam will remain in the unit and escape when the lid is opened
Here’s what’s in the box
Using your Foodi functions
Why are there 2 lids?
- The two-lid design allows you to pressure cook and crisp in the same pot.
- Use both lids to unlock a world of delicious, TenderCrisp meals.
Getting started with pressure cooking? Try this water test to practice with pressure.
- Add 70Oml water to cooking pot.
- Lock Pressure Lid.
- Turn valve to SEAL.
- Push PRESSURE, select high (HI), set time to 2 minutes, and press START/STOP.
- Moving lights and some steam release indicate pressure is building. When pressurized, countdown will begin.
- When the Foodi” beeps, turn valve to VENT for quick release.
Cleaning and Maintenance
Cleaning: Dishwasher & Hand-Washing
The unit should be cleaned thoroughly after every use.
Removing & Reinstalling the silicone Ring
To remove the silicone ring, pull it outward, section by section, from the silicone ring rack. The ring can be installed with either side facing up. To reinstall, press it down into the rack section by section. After use, remove any food debris from the silicone ring and anti-clog cap.
Keep the silicone ring clean to avoid odour.
Washing it in warm, soapy water or in the dishwasher can remove odour. However, it is normal for it to absorb the smell of certain acidic foods. It is recommended to have more than one silicone ring on hand. You can purchase additional silicone rings on ninjakitchen.eu
NEVER pll out the silicone ring with excessive force, as that may deform it and the rack and affect the pressure-sealing function. A silicone ring with cracks, cuts, or other damage should be replaced immediately.
NEVER clean the cooker base or pressure lid in the dishwasher. Inspect the pressure Ilid to ensure there is no debris blocking the valves.
