Loading manuals...

OLIGHT Warrior Mini Flashlight Manual

OLIGHT Warrior Mini Flashlight Manual Image


Thank you for purchasing this Olight Product. Please read this manual carefully before use and keep it for future reference!



* All above specifications are test results based on ANSI/NEMA FL1-2009 Standard. The tests are performed using the battery included in the flashlight.


Before first use, please unscrew the body and remove the insulating film. If the battery needs to be replaced, make sure that the positive end of the new battery faces the flashlight head when you put it in.

1 x customized 3500mAh 18650 rechargeable lithium battery


NOTE: If using moonlight mode, the battery indicator will only display when the battery level is below 5%.


Parameter Specification
Charging cable USB type-A – magnetic charging connector, length: 0.5m
Input USB A – Type DC 5V 2A
Charging pattern CC&CV
Maximum charging
Voltage of fully
charged battery
Time to fully charge 3.5 hours (For reference only. When the USB power source is insufficient to provide 5V 1.5A power capacity, the charging time will be longer)
Charge indication Red: charging Green: full (over 95%) or disconnected with a flashlight


* Before the first use please fully charge the product.
* Connect the USB end of the magnetic charging cable to an external USB power source, then attach the other end of the cable to the charging port of the light (best charging efficiency with a 7.5W (5V 1.5A) USB power source). The red indicator means charging, while the green indicator means charging completed (battery level>95%).
* Only charge with standard MCC3, not compatible with other MCC.


  • DO NOT throw the light directly into human eyes. This may cause temporary blindness or permanent damage to the eyes.
  • DO NOT cover the flashlight’s head or stand the flashlight on its head when it is on. The radiation energy may cause damage to the flashlight itself, or even result in the burning of flammable objects nearby.


  • DO NOT activate turbo mode repeatedly under high temperature to prevent the flashlight body from overheating and hurting the user’s hand.
  • The tail switch may not work while immersed in seawater or other conductive media. Please try to keep it clean and dry.
  • DO NOT use non-protected rechargeable batteries.
  • If the product is left unused or carried and transported, please lock the button to avoid accidentally activating the flashlight.


  • When the flashlight is turned off, moonlight, low, medium, or high mode will be memorized and become the default mode when the light is turned on again (high mode will only be memorized for 10 minutes. After that, the memorized mode will revert to the medium setting).
  • The turbo mode will slowly step down to high mode in 4 minutes in normal temperature.
  • DO NOT short-circuit the tail switch cap with the ring surrounding it. The short circuit in this case will result in an electric discharge of below 3mA between them and may lead to a complete battery drain if it is in this state for too long.



ON/OFF: Single-click the side switch to turn the light ON/OFF. When the light is turned on again, it will return to the previously memorized mode.
CHANGE BRIGHTNESS LEVEL: When the flashlight is on, press and hold the side switch and it will start from the present brightness level, automatically cycle through Low, Medium, and High mode. The mode is selected when the side switch has been released. ( Please note: moonlight and turbo are not in the automatic cycle ).
MOONLIGHT MODE: When the flashlight is off, press and hold the side switch for over one second to access the moonlight mode. If the memorized mode is moonlight, simply click the switch to access it.
TURBO AND RETURN: fast double click on the side switch to enter into Turbo, double click again to return. If memory mode were High or Medium, the output is Medium; if memory mode were Low or Moonlight, the output is memory mode.
STROBE: Quickly triple-click the side switch to enter the strobe mode. To quit this mode, single click or press and hold the side switch.
LOCKOUT/UNLOCK: When the flashlight is off, press and hold the side switch ( for about 2 seconds ) to access the button lockout mode ( the flashlight will enter the moonlight mode first and will then switch off to signal the lockout mode ). Under the lockout mode, press and hold the side switch for less than one second. The red indicator below the side switch will be on for two seconds to signal that the light is still in lockout mode. To unlock it, keep holding the side switch for over one second until the moonlight mode is on again.
The flashlight produces different output settings by pressing lightly or hard on the tail switch (please refer to the following program configurations).
CONFIGURATION 1 (FACTORY DEFAULT SETTING) : Half-press for Medium, hard press for Turbo; Single press the tail switch (press and release quickly) to turn the flashlight on or off;
Press and hold the tail switch for momentary-on. Release to turn off.
CONFIGURATION2: Half press for Turbo, hard press for Strobe, release switch to turn the flashlight off.
Switch between configuration 1 and configuration 2 by pressing hard then holding tail switch and single press on side switch at the same time; when you release tail switch, the Configuration will be selected.


Within 30 days of purchase: Contact the original seller for repair or replacement.
Within 5 years of purchase: Contact Olight for repair or replacement.
Battery warranty: Olight offers a one year warranty for all rechargeable batteries.
MCC magnetic USB charging cable: One year.
For any of the fragile or low-value fittings not covered above, like lanyard and clip, you can contact the post-sale in 30 days after the purchase, if it has any quality drawback or damage under normal use conditions. If such drawback or damage occurs 30 days after the purchase or under abnormal use conditions,  we will only offer conditional quality assurance as appropriate.



EU-Declaration of Conformity can be found here:

USA Customer Support [email protected]
Global Customer Support
Customer-[email protected]
Visit www.olightworld.com to see our complete product line of portable illumination tools.

Dongguan Olight E-Commerce Technology Co., Ltd
4th Floor, Building 4, Kegu Industrial Park, No 6
Zhongnan Road, Changan Town, Dongguan City,
Guangdong, China.

More Manuals From OLIGHT