Loading manuals...

Omron 3 Series BP7100 Manual


Omron 3 Series BP7100 Manual Image

Omron 3 Series BP7100 (Upper Arm Blood Pressure Monitor) Manual

Introduction

Thank you for purchasing the OMRON BP7100 Blood Pressure Monitor. This new blood pressure monitor uses the oscillometric method of blood pressure measurement. This means this monitor detects your blood movement through your brachial artery and converts the movements into a digital reading.

Safety Instructions

This instruction manual provides you with important information about the OMRON BP7100 Blood Pressure Monitor. To ensure the safe and proper use of this monitor, READ and UNDERSTAND all of these instructions. If you do not understand these instructions or have any questions, contact 1-800-634-4350 before attempting to use this monitor. For specific information about your own blood pressure, consult with your physician.

Intended Use

This device is a digital monitor intended for use in measuring blood pressure and pulse rate in adult patient population. The device detects the appearance of irregular heartbeats during measurement and gives a warning signal with readings. Environments of Use: Home Patient Population: Adult

Receiving and Inspection

Remove this monitor from the packaging and inspect for damage. If this monitor is damaged, DO NOT USE and contact 1-800-634-4350.

Symbols Glossary

For symbol information, visit: OmronHealthcare.com/symbols-glossary

Important Safety Information

Please read the Important Safety Information in this instruction manual before using this monitor. Please follow this instruction manual thoroughly for your safety. Please keep for future reference. For specific information about your own blood pressure, CONSULT WITH YOUR PHYSICIAN. Warning: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

  • DO NOT use this monitor on infants, toddlers, children or persons who cannot express themselves.
  • DO NOT adjust medication based on readings from this blood pressure monitor. Take medication as prescribed by your physician. ONLY a physician is qualified to diagnose and treat high blood pressure.
  • DO NOT use this monitor on an injured arm or an arm under medical treatment.
  • DO NOT apply the arm cuff on your arm while on an intravenous drip or blood transfusion.
  • DO NOT use this monitor in areas containing high frequency (HF) surgical equipment, magnetic resonance imaging (MRI) equipment, computerized tomography (CT) scanners or in oxygen rich environments. This may result in incorrect operation of the monitor and/or cause an inaccurate reading.
  • Consult with your physician before using this monitor if you have common arrhythmias such as atrial or ventricular premature beats or atrial fibrillation; arterial sclerosis; poor perfusion; diabetes; pregnancy; pre-eclampsia or renal disease. NOTE that any of these conditions in addition to patient motion, trembling, or shivering may affect the measurement reading.
  • NEVER diagnose or treat yourself based on your readings. ALWAYS consult with your physician.
  • To help avoid strangulation, keep the air tube away from infants, toddlers or children.
  • This product contains small parts that may cause a choking hazard if swallowed by infants, toddlers or children.

Battery Handling and Usage

Caution: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury to the user or patient, or cause damage to the equipment or other property.

  • Keep batteries out of the reach of infants, toddlers or children.
  • Stop using this monitor and consult with your physician if you experience skin irritation or discomfort.
  • Consult with your physician before using this monitor on an arm where intravascular access or therapy, or an arteriovenous (A-V) shunt, is present because of temporary interference to blood flow which could result in injury.
  • Consult with your physician before using this monitor if you have had a mastectomy.
  • Consult with your physician before using this monitor if you have severe blood flow problems or blood disorders as cuff inflation can cause bruising.
  • DO NOT take measurements more often than necessary because bruising, due to blood flow interference, may occur.
  • ONLY inflate the arm cuff when it is applied on your upper arm.
  • Remove the arm cuff if it does not start deflating during a measurement.
  • DO NOT use this monitor for any purpose other than measuring blood pressure.
  • Do not use a mobile phone or other devices that emit electromagnetic fields, near the monitor. This may result in incorrect operation of the monitor.
  • DO NOT disassemble or attempt to repair this monitor or other components. This may cause an inaccurate reading.
  • DO NOT use in a location where there is moisture or a risk of water splashing this monitor. This may damage this monitor.
  • DO NOT use this monitor in a moving vehicle such as in a car.
  • DO NOT drop or subject this monitor to strong shocks or vibrations.
  • DO NOT use this monitor in places with high or low humidity or high or low temperatures. Refer to section 5.
  • Ensure this monitor is not impairing blood circulation by observing the arm while measurement is occurring.
  • DO NOT use this monitor in high-use environments such as medical clinics or physician offices.
  • DO NOT use this monitor with other medical electrical (ME) equipment simultaneously. This may result in incorrect operation of the monitor and/or cause an inaccurate reading.
  • Avoid bathing, drinking alcohol or caffeine, smoking, exercising and eating for at least 30 minutes before taking a measurement.
  • Rest for at least 5 minutes before taking a measurement.
  • Remove tight-fitting, thick clothing from your arm while taking a measurement.
  • Remain still and DO NOT talk while taking a measurement.
  • ONLY use the arm cuff on persons whose arm circumference is within the specified range of the cuff.
  • Ensure that this monitor has acclimated to room temperature before taking a measurement. Taking a measurement after an extreme temperature change could lead to an inaccurate reading. OMRON recommends waiting for approximately 2 hours for the monitor to warm up or cool down when the monitor is used in an environment within the temperature specified as operating conditions after it is stored either at the maximum or at the minimum storage temperature. For additional information of operating and storage/transport temperature, refer to section 5.
  • DO NOT crease the arm cuff or the air tube excessively.
  • DO NOT fold or kink the air tube while taking a measurement. This may cause an injury by interrupting air flow.
  • To unplug the air plug, pull on the plastic air plug at the base of the tube, not the tube itself.
  • ONLY use the arm cuff, batteries and accessories specified for this monitor. Use of unsupported arm cuffs and batteries may damage and/or may be hazardous to this monitor.
  • ONLY use the approved arm cuff for this monitor. Use of other arm cuffs may result in incorrect readings.
  • Inflating to a higher pressure than necessary may result in bruising of the arm where the cuff is applied. NOTE: please refer to “If your systolic pressure is more than 210 mmHg” in section 3 of this instruction manual for additional information.
  • Read and follow the “Important information regarding Electromagnetic Compatibility (EMC)” in section 9 of this manual.
  • DO NOT insert batteries with their polarities incorrectly aligned.
  • ONLY use 4 “AA” alkaline or manganese batteries with this monitor. DO NOT use other types of batteries. DO NOT use new and used batteries together.
  • Remove batteries if this monitor will not be used for a long period of time.
  • If battery fluid should get in your eyes, immediately rinse with plenty of clean water. Consult with your physician immediately.
  • If battery fluid should get on your skin, wash your skin immediately with plenty of clean, lukewarm water. If irritation, injury or pain persists, consult with your physician.
  • DO NOT use batteries after their expiration date.
  • Periodically check batteries to ensure they are in good working condition.

1. Know Your Monitor

Contents:

Monitor, arm cuff, instruction manual, quick start guide

Monitor:

A. Display                B. START/STOP button C. Memory button   D. Battery compartment E. Air jack

Arm cuff:

F. Arm cuff (Arm circumference 9″ – 17″ (22 – 42 cm)) G. Air plug     H. Air tube

Display:

I. Memory symbol                 J. Systolic blood pressure K. Diastolic blood pressure   L. Low battery symbol M. Heartbeat symbol (Flashes during measurement.) N. Irregular heartbeat symbol      O. Movement error symbol P. Pulse display / Memory number   Q. Deflation symbol

1.1 Display symbols
Irregular Heartbeat Symbol (

When the monitor detects an irregular rhythm two or more times during the measurement, the irregular heartbeat symbol will appear on the display with the measurement values. An irregular heartbeat rhythm is defined as a rhythm that is 25% less or 25% more than the average rhythm detected while the monitor is measuring the systolic and diastolic blood pressure. If the irregular heartbeat symbol displays with your measurement results, we recommend you consult your physician. Follow the directions of your physician.

Movement Error Symbol (

The movement error symbol is displayed if you move your body during the measurement. Please remove the arm cuff, and wait 2 – 3 minutes. Take another measurement, remain still during measurement.

Classification of BP (Blood Pressure)

ACC/AHA 2017 Hypertension guidelines define categories of BP in adults as below: Categories of BP in Adults* 

  • Individuals with Systolic BP and Diastolic BP in 2 categories should be designated to the higher BP category.

BP indicates blood pressure (based on an average of ≥ 2 careful readings obtained on ≥ 2 occasions). Source: ACC/AHA 2017 High Blood Pressure Clinical Practice Guideline Warning: NEVER diagnose or treat yourself based on your readings. ALWAYS consult with your physician.

1.2 Blood Pressure Measurement Tips

To help ensure an accurate reading, follow these directions:

  • Stress raises blood pressure. Avoid taking measurements during stressful times.
  • Measurements should be taken in a quiet place.
  • It is important to take measurements at the same times each day. Taking measurements in the morning and in the evening is recommended.
  • Remember to have a record of your blood pressure and pulse readings for your physician. A single measurement does not provide an accurate indication of your true blood pressure. You need to take and record several readings over a period of time.

Caution:

  • Avoid bathing, drinking alcohol or caffeine, smoking, exercising and eating for at least 30 minutes before taking a measurement.
  • Rest for at least 5 minutes before taking a measurement.

2. Preparation

2.1 Battery Installation
  1. Remove the battery cover.
  2. Insert 4 “AA” batteries as indicated in the battery compartment.
  3. Replace the battery cover.

Notes:

  • When the low battery symbol ( ) appears on the display, turn the monitor off, then replace all batteries at the same time. Long life alkaline batteries are recommended.
  • The measurement values continue to be stored in memory even after the batteries are replaced.
  • Disposal of used batteries should be carried out in accordance with local regulations.

3. Using the Monitor

3.1 Applying the Arm Cuff

Caution: Remove tight-fitting, thick clothing from your arm while taking a measurement. 

  1. Insert the air plug into the air jack securely.
  2. Wrap the arm cuff firmly in place around your left upper arm. The bottom edge of the arm cuff should be 0.5 inch (1 to 2 cm) above the elbow. Air tube is on the inside of your arm and aligned with your middle finger.
  3. Secure closed with the fabric fastener.

Notes:

  • When you take a measurement on the right arm, the air tube will be at the side of your elbow. Be careful not to rest your arm on the air tube.
  • The blood pressure can differ between the right arm and the left arm, and the measured blood pressure values can be different. OMRON recommends to always use the same arm for measurement. If the values between both arms differ substantially, please check with your physician which arm to use for your measurements.
3.2 How to Sit Correctly

To take a measurement, you need to be relaxed and comfortably seated, under comfortable room temperature. Avoid bathing, drinking alcohol or caffeine, smoking, exercising or eating 30 minutes before taking a measurement.

  • Sit in a chair with your legs uncrossed and feet flat on the floor.
  • Sit with your back and arm supported.
  • The arm cuff should be placed on your arm at the same level as your heart, with the arm resting comfortably on a table.
3.3 Taking a Measurement

Notes:

  • To stop the measurement, press the START/STOP button once to deflate the arm cuff.
  • Remain still and quiet while taking a measurement.
  1. Press the START/STOP button. The arm cuff will start to inflate automatically
  2. Remove the arm cuff.
  3. Press the START/STOP button to turn the monitor off. The monitor automatically stores the measurement result in its memory. It will automatically turn off after 2 minutes. Note: Wait 2-3 minutes before taking another measurement. Waiting between measurements allows the arteries to return to the condition prior to taking a measurement.
3.4 Using the Memory Function

The monitor automatically stores the results up to 14 sets. Note: If the memory is full, the monitor will delete the oldest value.  To View the Measurement Values Stored in Memory

  1. Press the button. The Memory number appears for a second before the pulse rate is displayed. The newest set is numbered “1”.
  2. Press the button repeatedly to view the values stored in memory.
To Delete All the Values Stored in Memory
  1. Press the button, while the memory symbol appears.
  2. While holding the button down, press the START/STOP button for more than 3 seconds. Note: You cannot partially delete the values stored in memory.

4. Error Messages and Troubleshooting

4.1 Error Messages

4.2 Troubleshooting

5. Maintenance

5.1 Maintenance

To protect your monitor from damage, please follow the directions below:

  • Changes or modifications not approved by the manufacturer will void the user warranty.
  • DO NOT disassemble or attempt to repair this monitor or other components. This may cause an inaccurate reading.
5.2 Storage

Store your monitor and other components in a clean, safe location.

  1. Unplug the air plug from the air jack.
  2. Gently fold the air tube into the arm cuff.

Note:

  • Do not bend or crease the air tube excessively.
5.3 Cleaning
  • Do not use any abrasive or volatile cleaners.
  • Use a soft dry cloth or a soft cloth moistened with neutral soap to clean your monitor and arm cuff, and then wipe them with a dry cloth.
  • Do not wash or immerse your monitor and arm cuff or other components in water.
  • Do not use gasoline, thinners or similar solvents to clean your monitor and arm cuff or other components.
5.4 Disposal
  • Dispose of your monitor, other components and optional accessories according to applicable local regulations.
  • Unlawful disposal may cause environmental pollution.
5.5 Optional Medical Accessories

Arm cuff Arm circumference 7″ – 9″ (17 – 22 cm) CD-CS9 (Model: HEM-CS24)

Arm circumference 9″ – 17″ (22 – 42 cm) CD-WR17 (Model: HEM-RML31)

6. Specifications

Model BP7100 HEM-7121-Z2 Display LCD digital display Cuff pressure range Pressure: 0 to 299 mmHg Measurement range Pressure: 20 to 280 mmHg Pulse: 40 to 180 beats / min. Accuracy Pressure: ±3 mmHg Pulse: ± 5% of display reading Inflation Fuzzy-logic controlled by electric pump Deflation Automatic pressure release valve Measurement method Oscillometric method IP classification IP 20 Rating DC6 V 4 W Power source 4 “AA” batteries 1.5 V Battery life Approximately 1000 measurements (using new alkaline batteries) Durable period (Service life) Monitor: 5 years Cuff: 5 years Operating conditions +50 °F to +104 °F (+10 °C to + 40 °C) / 15 to 90% RH (non-condensing) / 800 to 1060 hPa Storage / Transport conditions -4 °F to +140 °F (-20 °C to +60 °C) / 10 to 90% RH (non condensing) Weight Monitor : Approximately 8.8 oz. (250 g) not including batteries Arm cuff : Approximately 6 oz. (170 g) Dimensions Monitor : Approximately 4.0″ (w) × 3.1″ (h) × 5.1″ (l) (103 mm × 80 mm × 129 mm) Arm cuff : Approximately 5.7″ × 23.4″ (air tube: 29.5″) (145 mm × 594 mm (air tube: 750 mm)) Cuff circumference applicable to the monitor 7″ to 17″ (170 to 420 mm) (included arm cuff 9” to 17” (220 to 420 mm)) Memory Up to 14 Readings Contents Monitor, arm cuff, instruction manual, quick start guide Applied part Type BF (arm cuff) Protection against electric shock Internally powered ME equipment Notes:

  • These specifications are subject to change without notice.
  • This monitor is clinically investigated according to the requirements of ISO 81060-2:2013. In the clinical validation study, K5 was used on 85 subjects for determination of diastolic blood pressure.
  • This monitor has not been validated for use on pregnant patients.
  • IP classification is degrees of protection provided by enclosures in accordance with IEC 60529. This monitor is protected against solid foreign objects of 12.5 mm diameter and greater such as a finger.

Pictogram on the Product

FAQS

What sizes are available?

The standard cuff fits a wide range of diameters.

Where can I buy a small cuff adult with.7” upper srm?

Search Amazon for Omron Blood Pressure Monitor Upper Arm Children/Adult Kid Small Cuff 17-22cm CS2

compressed tube There is a complete bend in the tube as if it has been compressed/folded. Will this impact the readings?

Yes. Any constriction in the tube will compromise the readings.

does this come with instructions in spanish as well as english? can we get a spanish owner’s manual?

You can also download the Spanish version instructions online. Omron BP1500

Does this monitor come with a warranty?

Yes, the monitor comes with a 1 year warranty.

Does this monitor have a memory feature?

Yes, the Omron 3 Series has a memory feature that stores the last 20 readings.

Can I use this monitor on my wrist?

No, this monitor is designed to be used on the upper arm.

How do I clean this monitor?

To clean the monitor, use a soft cloth and mild soap. DO NOT submerge in water or place in the dishwasher. DO NOT use alcohol or other cleaning agents. DO NOT use abrasive cleaners. DO NOT place near open flame or excessive heat.

Can I use this monitor if I have an implanted pacemaker or defibrillator?

No, you cannot use this device if you have an implanted pacemaker or defibrillator.

does omron have a unit that has date and time?

This particular model does not.

Does this model pair with Samsung health?

No, it is not a digital device, there is no way to transmit any data to the app, but there is a memory function that can store BP readings in the device

Does it indicate when batteries are low?

This particular model has a low battery symbol. It flashes when the batteries are low.

Does the screen light up?

If you have followed the directions correctly, the results for blood pressure and pulse will clearly show on the screen.

Where are the wrist ormon?

Sure

what is the series of this omron blood pressure monitor?

Series 3 Model #BP-710N

Do the make a smaller cup for the Omron BP5100?

Omron makes a “Small D-Ring Cuff” (CD-CS9) that fits smaller arms (7″ – 9″). The standard cuff is 9″ -17″ (22 – 42 cm). Note that the small cuff is only 2 inches but the standard cuff has an 8″ range, so it must be changed out if you are switching from an adult to a smaller person.

Is this made in USA?

No. It is not made in the USA.

is this product latex free?

Yes it is!


More Manuals From Omron