Sections in this Manual
Clock and Sleep Timer
Setting the Clock
- If in Radio Mode, press and hold the Power/Source/Al Off button to turn the unit off.
- Press and hold the Clock/Mem button until the display begins to blink, then release the button.
- Press the Hour button to adjust the hour. The PM indicator will light when the hour is set in the PM.
- Press the Min button to adjust the minute.
- Press the Clock/Mem button to finish setting the time.
Setting the Sleep Timer
Note: There may be up to a 1-minute deviation in the sleep timer.
- Press the Snooze/Sleep button repeatedly to set the sleep timer ( 90, 80, 70, 60, 50, 40, 30, 20, 10 or OFF ).
- Once the set sleep time has expired the clock radio will automatically power off.
Alarm
Setting the Alarm
- If in Radio Mode, press and hold the Power/Source/Al Off button to turn the unit off.
- Press the AL1 or AL2 button until the display begins to blink.
- Press the Hour button to adjust the hour. The PM indicator will light when the hour is set in the PM.
- Press the Min button to adjust the minute.
- Press the AL1 or AL2 buttons repeatedly to switch between Radio and Buzzer.
- Once the set alarm time is reached, the alarm will sound.
- To set the other alarm, follow the above steps and choose the alarm not currently set.
Disabling the Alarm
• Press the AL1 or AL2 buttons repeatedly until the indicator is no longer lit.
Snooze and Alarm Reset
After the alarm sounds:
• Press the Snooze/Sleep button to delay the alarm for several minutes.
• Press the Power/Source/Al Off button to turn the alarm off until the set alarm time is reached again.
Radio
Tuning the AM or FM Radio
- Press the Power/Source/Al Off button to turn the clock radio on.
- Press the Power/Source/Al Off button again to switch between AM and FM Radio Mode.
- Press the Tun+/- buttons to adjust the radio to the desired frequency.
- Press and hold the Tun+/- buttons to search for the next available frequency.
- Press the Vol+/- buttons to adjust the volume.
- Press and hold the Power/Source/Al Off to turn the radio off.
Saving and Tuning to a Station as a Preset
- Tune to the desired station.
- Press the Clock/Mem button to cycle through preset radio stations.
- Press Tun+/Tun- to select which preset you want to save the station to. Up to 10 stations can be saved.
- Press the Clock/Mem to save the selected station.
- To cycle through presets press the Clock/Mem button and press the Tun+/Tun- to select which preset you want to listen to.
Radio Reception
A wired FM antenna is built into the clock radio and exits from the rear of the unit. To improve radio reception, adjust the position of the antenna, or if need be, adjust the position of the clock radio.
FAQs
How do you set a digital radio clock?
Setting the Time of the Clock Radio
Plug the power cord of the clock radio into a working electrical outlet.
On the clock radio, press and hold the CLOCK button for 2 seconds.
Release the CLOCK button.
Press the TIME SET+ or TIME SET- button to select the hour.
Press the CLOCK button.
How do I turn off the alarm on my clock radio?
To deactivate the alarm on the AM/FM clock radio, press the ALARM SET A or ALARM SET B button. NOTE: The ALARM A or ALARM SET B indicator will disappear from the upper left-hand corner of the display indicating that ALARM A or ALARM B is no longer activated
How do you set a clock?
Set time, date & time zone
Open your phone’s Clock app .
Tap More. Settings. To pick your home time zone: Tap Home time zone. To automatically update your timezone: Tap Change date & time. Set time zone automatically. To update your timezone based on your location: Tap Change date & time Set time zone automatically.
Does this radio have a clock?
Yes, it does.
How do I turn on the radio?
Press the power button to turn it on.
How do I turn off the radio?
Press and hold the power button until the unit turns off.
How do I set the alarm?
To set the alarm, press and hold the alarm button until you hear a beep, then use the volume up/down buttons to set your alarm time. Once you have set your alarm time, press and hold the alarm button again until you hear a beep, then press and release the power button to confirm your settings. To cancel your alarms, press and hold the snooze/alarm cancel button until you hear a beep, then press and release the power button to confirm your settings.
What happens if I try to set an alarm for a time that has already passed?
The alarm will not sound as it is already too late in that case. It will still sound if you try to set an alarm for a time in the future though!
Where are my alarm settings?
Set an alarm
Open your phone’s Clock app.
At the bottom, tap Alarm.
Pick an alarm. To add an alarm, tap Add . To reset an alarm, tap its current time.
Set the alarm time. On the analog clock: slide the hand to the hour you want. Then slide the hand to the minutes you want.
Tap OK.
Why don’t I hear my alarm in the morning?
If you don’t actually hear your alarm, you could just naturally be a heavy sleeper. According to Dr. Guy Meadows, co-founder and clinical lead at Sleep School, research suggests that deep sleepers have more sleep spindles, a form of brain activity during non-rapid eye movement (NREM) sleep.
How do you set AM and PM on a digital clock?
To change the clock format, click the ••• to the right of the clock and then click the switch next to 24-hour clock. When you switch to the 12-hour format, the AM/PM unit will display for a moment and then fade away to keep the interface clean.
What is the name of the dots on a digital clock?
It’s a colon; this is one of its uses. It’s a colon.
