Loading manuals...

onn Glass Screen Protector Manual


onn Glass Screen Protector Manual Image

onn Glass Screen Protector

Cleaning

Remove the case from your device to avoid interference with application.

Clean the Screen

Clean the device screen with the wet wipe.

Dry the Screen

Dry with the microfiber cloth. Ensure the screen is completely dry before proceeding.

Remove Dust

Use the dust removal sticker to remove any fine particles from the device screen.

Application Tabs

Apply the Application Tabs

Apply the two application guiding tabs to the front of the screen protector.
Note: Do not apply them to the tab labeled “1-Back”.

Device without Home Button

Device with Home Button

Screen Protector Application

Remove Safety Film

Using the tab labeled “1-Back”, peel away to expose the adhesive, removing completely.
Note: Do not touch adhesive on the glass.

Place the Screen Protector

Hold the application guiding tabs and align over the device screen. Once in position lower onto the device.
Tip: If you need to reposition, gently lift up and reapply.

Attach the Screen Protector

Press firmly down along the center to adhere the screen protector.

Final Steps

Remove the Application Tabs

Peel off the application tabs.

Remove Air Bubbles

If there are any air bubbles, remove them by starting from the center and pushing firmly outward toward the edges.
Note: Small bubbles may dissipate over the next 48 hours.


More Manuals From onn