Loading manuals...

PARKSIDE PSBSAP 20-Li B2 Cordless Impact Drill 20V Manual


PARKSIDE PSBSAP 20-Li B2 Cordless Impact Drill 20V Manual Image

PSBSAP 20-Li B2 Cordless Impact Drill 20V
Instruction Manual

http://www.lidl-service.com

CORDLESS IMPACT DRILL 20V 
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device.
Translation of the original instructions

All Parkside tools and the chargers PLG 20 A1/A4/C1/A2/C2/ A3/C3/PDSLG 20 A1 of the X20V Team series are compatible with the PAP 20 A1/A2/A3/B1/B3 battery pack.

Charging times 2 Ah Battery pack
PAP 20 Al/B1
3 Ah Battery pack
PAP 20 A2
4 Ah Battery pack
PAP 20 A3/B3
Charging currents
max. 2,4 A
Charger PLG 20 Al/A4/C1
60 min 90 min 120 min
24A 24A 24A
max. 3,5 A
Charger PLG 20 A2/C2
45 min 60 min 80 min
35A 35A 35A
max. 4,5 A
Charger PLG 20 A3/C3
35 min 45 min 60 min
38A 45A 45A
max. 4,5 A
Charger
35 min 45 min 60 min
3,8 A 4,5 A 4,5 A

Introduction

Congratulations on the purchase of your new tool. You have chosen a high-quality product. The operating instructions are part of this product. They contain important information about safety, usage and disposal. Before using the product, please familiarise yourself with all operating and safety instructions. Use the product only as described and for the range of applications specified. Please also pass these operating instructions on to any future owner.
Intended use
This tool is intended for screwing in and removing screws as well as drilling in wood, metal, ceramic and plastic and impact drilling in bricks and masonry. It is not suitable for impact drilling in natural stone such as granite. The light on this tool is intended to illuminate the immediate work area of the tool. Use this product only as described and for the areas of applications specified. The tool is not intended for commercial use. Any other usage or modification of the tool is deemed to be improper and carries a significant risk of accidents. The manufacturer accepts no responsibility for damage attributable to misuse.

Features

Additional handle
Depth stop
Teeth on the depth stop
Mounting ring for the additional handle
Screw for the depth stop
Speed selector switch
Rotation direction switch/lock
ON/OFF switch/speed control
Belt clip
LED work light
Torque selection ring w Chuck
Fig. A
Battery pack*
Release button for the battery pack
High-speed charger *
Battery display LED
Battery charge level button
Red charge control LED
o Green charge control LED

Package contents

  • 1 cordless impact drill 20V
  • 1 additional handle
  • 1 depth stop
  • 1 carrying case
  • 1 set of operating instructions

Technical data

Cordless Impact Drill 20V PSBSAP 20-Li B2

Rated voltage 20 V Direct Current (DC)
Gears 2-speed gearbox
Rated idle speed 1st gear: n0 0–400 rpm
2nd gear: n0 0–2000 rpm
Stroke frequency 1st gear: n00–7200 rpm
2nd gear: n0 0–36000 rpm
Max. torque 80 Nm
Torque levels 1–21 + 1 drill setting/ + 1 hammer setting
Chuck capacity max. Ø 13 mm
Max. drill diameter 65 mm for wood
16 mm concrete
(without stones)
13 mm for steel

Battery PAP 20 B1*

Type
Rated voltage
Capacity
Cells 5
LITHIUM-ION
20 V  Direct Current(DC)
Ah
5

High-speed charger PLG 20 C2*
INPUT

Rated voltage
Rated power consumption
Fuse (internal)
230–240 V ∼, 50 Hz (AC)
consumption 85
3.15 A  T3.15A

OUTPUT

Rated voltage
Rated current
Charging time
Protection class
21.5 V Direct Current (DC)
3.5 A
approx. 45 min
II /Double insulation (double insulation)

* BATTERY AND CHARGER ARE NOT INCLUDED
Noise emission value
Noise measurement value determined in accordance with EN 62841. The A-rated noise level of the power tool is typical:

Sound pressure level
Uncertainty K
Sound power level
Uncertainty K
LPA = 89 dB (A)
KPA = 5 dB
LWA = 100 dB (A)
KWA = 5 dB

Vibration emission value
Total vibration values (vector total of three directions) determined in accordance with EN 62841:
Impact drilling in concrete a = 6.1 m/s2
Uncertainty K = 1.5 m/s2
Wear ear muffs!
NOTE
The vibration emission values and the noise emission values given in these instructions have been measured in accordance with a standardised test procedure and can be used for the comparison of the power tool with another tool.
The specified total vibration values and the noise emission values can also be used to make a provisional load estimate.
warning 2 WARNING!
Depending on the manner in which the power tool is being used and, in particular, the kind of workpiece being worked, the vibration and noise emission values can deviate from the values given in these instructions during the actual use of the power tool.
Try to keep the vibration load as low as possible. Measures to reduce the vibration load are, e.g. wearing gloves and limiting the working time. Wherein all states of operation must be included (e.g. times when the power tool is switched off and times where the power tool is switched on but running without load).
Starkey Standard Charger & Custom-Consult General power tool
manual carefully safety warnings

warning 2 WARNING!
Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

  1. Work area safety
    a) Keep the work area clean and well lit. Cluttered or dark areas invite accidents.
    b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks that may ignite dust or fumes.
    c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
  2. Electrical safety
    a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.
    b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
    c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
    d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
    e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
    f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.
  3. Personal safety
    a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
    b) Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions will reduce personal injuries.
    c) Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.
    d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key attached to a rotating part of the power tool can result in personal injury.
    e) Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
    f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
    g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
    h) Do not allow yourself to get lulled into a false sense of security and do not ignore the safety rules for power tools, even if you are familiar with the power tool after repeated use. A careless action can cause severe injury within a fraction of a second.
  4. Power tool use and care
    a) Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
    b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
    c) Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.
    d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
    e) Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
    f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
    g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.
    h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
  5. Use and handling of the cordless electrical power tool
    a) Charge a rechargeable battery using only the charger recommended by the manufacturer. Chargers are often designed for a particular type of rechargeable battery unit. There is a risk of fire if the battery charger specified for a particular type of battery is used with other batteries.
    b) Only the rechargeable battery units supplied are to be used with an electrical power tool. The use of other rechargeable battery units may lead to the danger of injury or fire.
    c) When they are not being used, store rechargeable battery units away from paperclips, coins, keys, nails, screws or other small metal objects that could cause the contacts to be bridged. Short-circuiting the contacts of a rechargeable battery unit may result in heat damage or fire.
    d) Fluids may leak out of rechargeable battery units if they are misused. If this happens, avoid contact with the fluid. If contact occurs, flush the affected area with water. Seek additional medical help if any of the fluid gets into your eyes. Escaping battery fluid may cause skin irritation or burns.
    e) Do not use a damaged or modified battery. Damaged or modified batteries may behave unexpectedly and cause fires, explosions or pose a risk of injury.
    f) Do not expose a battery to fire or excessively high temperatures. Fire or temperatures in excess of 130°C (265°F) can cause an explosion.
    g) Follow all instructions regarding charging and never charge the battery or the cordless tool outside of the temperature range given in the operating instructions. Incorrect charging or charging outside of the permissible temperature range can destroy the battery and increase the risk of fire.
    warning 2 CAUTION! RISK OF EXPLOSION! Never charge non-rechargeable batteries.
    Protect the rechargeable battery from heat (for example, from continuous exposure to sunlight), fire, water and moisture. There is a risk of explosion.
  6. Service
    a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
    b) Never try to repair damaged batteries. Maintenance of batteries should only be carried out by the manufacturer or an approved customer service centre.

Safety instructions for drills

Safety instructions for all work

Wear ear muffs when hammer drilling.
Exposure to loud noise can lead to hearing loss.
Use the additional handle(s). Loss of control can lead to injuries.
Hold the tool by the insulated gripping surfaces when performing work where the screws or the accessory tool may hit hidden power lines. If the accessory tool or the screws come into contact with a live wire, this may make exposed metal parts of the power tool live and result in an electric shock.
Collect any dust that is produced; for example, using a vacuum cleaner.
Safety information for using long drill bits
Do not use a higher rotational speed than the maximum permissible speed. At higher speeds, the drill bit can bend slightly if allowed to turn freely without being in contact with the workpiece and this can lead to injuries.
Always start drilling at a low speed and with the drill bit in contact with the workpiece. At higher speeds, the drill bit can bend slightly if allowed to turn freely without being in contact with the workpiece and this can lead to injuries.
Do not exert excessive pressure and only apply pressure along the length of the drill bit (no lateral pressure). Drill bits can bend and break which can lead to a loss of control and injuries.
Original accessories/attachments
Use only the accessories and attachments which are specified in the operating instructions and are compatible with the tool.
warning 2 WARNING!
Do not use any accessories that are not recommended by PARKSIDE. This can lead to electric shock and fire.|
Safety guidelines for battery chargers

  • This tool may be used by children aged 8 years and above and by persons with limited physical, sensory or mental capabilities or lack of experience and knowledge, provided that they are under supervision or have been told how to use the tool safely and are aware of the potential risks.
  • Do not allow children to use the tool as a toy.
  • Cleaning and user maintenance tasks may not be carried out by children unless they are supervised.
  • To avoid potential risks, damaged mains cables should be replaced by the manufacturer, their customer service department or a similarly qualified person.

indoor use only. The charger is suitable for indoor use only.
warning 2 WARNING!
To avoid potential risks, damaged mains cables should be replaced by the manufacturer, their customer service department or a similarly qualified person.
warning 2 ATTENTION!
This charger can only charge the following batteries: PAP 20 A1/PAP 20 A2/ PAP 20 A3/PAP 20 B1/PAP 20 B3.
A current list of battery compatibility can be found at www.Lidl.de/Akku.

Before use

Charging the battery pack (see fig. A)
warning 2CAUTION!
Always unplug the tool before you remove the battery pack or connect the battery pack to the charger.
NOTE

  • Never charge the battery pack if the ambient temperature is below 10°C or above 40°C. If a lithium-ion battery is going to be stored for an extended period, the charge level should be checked regularly. The optimum charge level is between 50% and 80%. The storage climate should be cool and dry and the ambient temperature should be between 0°C and 50°C.
  • Connect the battery pack 13 to the high-speed charger 15 (see fig. A).
  • Insert the power plug into the socket. The green charge control LED 19 lights up briefly, then the red charge control LED18 lights up.
  • The green charge control LED 19 indicates that the charging process is complete and the battery pack 13 is ready for use.

warning 2 ATTENTION!

  • If the red charge control LED 18 flashes, this means that the battery pack13 has overheated and cannot be charged.
  • If the red and green charge control LEDs 18/19 both flash, this means that the battery pack13 is defective.
  • Push the battery pack 13 back into the tool.
  • Switch off the charger for at least 15 minutes between successive charging sessions. Also, disconnect the power plug from the mains power socket.

Inserting/removing the battery pack
Inserting the battery pack
Set the rotation direction switch 7 to the middle position (lock). Push the battery pack e into the handle until it clicks into place.
Removing the battery pack
Press the release button r and remove the battery pack 13
Checking the battery charge level
Press the battery charge level button 17 to check the status of the battery. The status/ remaining charge will be shown on the battery display LED 16 as follows: RED/ORANGE/GREEN = maximum charge RED/ORANGE = medium charge RED = low charge ­ charge the battery
Additional handle
NOTE

  • For safety reasons, you should never use this tool without the additional handle 1 attached.
  • Loosen the strap on the additional handle 1 by turning it clockwise.
  • Slide the mounting ring for the additional handle 4 over the chuck 12
  • Turn the additional handle 1 to the required position.
  • Afterwards, twist the additional handle 1 anticlockwise again to tighten it.

Depth stop

  • Undo the screw on the depth stop 5.
  • Fit the depth stop 2 into the additional handle 1.
  • Make sure that the teeth on the depth stop 3 points upwards and downwards.
  • Pull the depth stop 2 out until the distance between the tip of the drill and the tip of the depth stop corresponds with the required drilling depth.
  • Tighten the screw on the depth stop 5 to lock the depth stop 2 into place.

Changing tools
Your cordless impact drill driver has a fully automatic spindle lock.
When the motor is stopped, the power train is locked so that the chuck w can be opened by turning. After you have attached the desired tool and tightened it by turning the chuck, you can continue working. The spindle lock is released automatically when the motor is started (by pressing the ON/OFF switch 8).
Torque selection/selecting the operating mode
You can set the torque using the torque selection ring 11 or by choosing between the drill setting and the hammer drill setting IT.

  • Select a low level for small screws or soft materials.
  • Select a high level for large screws, hard materials or removing screws.
  • Select the drill setting for drilling work by adjusting the torque selection ring to the position IT.
  • Select the hammer drill setting for hammer drilling work by adjusting the torque selection ring to the position IT.

2-speed gearbox
warning 2 CAUTION! Operate the speed selector switch 6 only when the tool is at a standstill. Otherwise, the tool could be damaged.
In the first gear (speed selector switch 6 in position 1),
you can reach a speed of approx. 400 rpm and high torque. This setting is suitable for all screwing work. In the second gear (speed selector switch 6 in position 2), you can reach a speed of approx. 2000 rpm for carrying out drilling work.

Operation

Switching on/off
Turn on Press and hold the ON/OFF switch 8 to start the tool. The LED work light 0 lights up when the ON/OFF switch 8 is pressed lightly or fully. This provides illumination of the work area in poor lighting conditions.
Switching off
Release the ON/OFF switch 8 to switch off the tool.
Setting the rotational speed
Pressing the ON/OFF switch 8 lightly yields a low speed. Increasing the pressure increases the speed.
NOTE
The integrated motor brake ensures that the tool stops quickly.
Changing the direction of rotation
Change the direction of rotation by pushing the rotation direction switch 7 to the right or left.
Tips and tricks
instructions Tip! How to do things correctly.

  • Before the operation, check whether the screw or drill bit is correctly fitted, i.e. centred in the chuck.
  • Screw bits are labelled according to their dimensions and their shape. If you are uncertain, always check first whether the bit fits tightly in the screw head without any play.

Torque

  • Smaller screws/bits can be damaged if you set too high a torque or too high a speed.

Hard screw joints (in metal)

  • Particularly high torques occur, e.g. in metal screw joints when using drive sockets. Select a low rotational speed.

Soft screw joints (e.g. in softwood

  • Here, too, use a low speed to avoid damaging the wood surface when it comes into contact with the metal screw head. Use a countersink. Small screws can be screwed directly into softwood without predrilling.

When drilling in wood, metal and other materials, observe the following:

  • Use a high speed for drill bits with a small diameter and a low speed for drill bits with a large diameter.
  • Select a low speed for hard materials and a high speed for soft materials.
  • Mark the spot where you want to drill using a centre punch or nail. Select a low rotational speed when starting.
  • Pull the rotating drill bit from the hole repeatedly to remove dust and chips and clear the hole.

Drilling in metal

  • Use a metal drill (HSS). For optimum results, you should cool the drill bit with oil. Metal drill bits can also be used to drill into plastics. Start with a 3 mm drill bit and then increase the size until the desired hole diameter is achieved.

Drilling in brick
Uses a carbide-tipped masonry drill (max. recommended drill diameter 16 mm).
Drilling in wood
Use a wood drill with a lathe centre; for deep holes, use an auger bit; for large-diameter holes, use a Forstner bit.

Maintenance and cleaning

warning 2  WARNING! RISK OF INJURY! Always switch the tool off and remove the battery before carrying out any work on it.
The cordless impact drill driver is maintenance-free.

  • The tool must always be kept clean, dry and free from oil or grease.
  • Never allow liquids to get into the tool.
  • Use a dry cloth to clean the housing. Never use petrol, solvents or cleansers which can damage plastic.
  • If a lithium-ion battery is going to be stored for an extended period, the charge level should be checked regularly. The optimum charge level is between 50% and 80%. The optimum storage environment is cool and dry.

NOTE
Replacement parts not listed (such as switches) can be ordered via our Service Hotline.
Disposal
Recycle IconThe packaging is made from environmentally friendly material which can be disposed of at your local recycling plant.
Dustbin Icon Do not dispose of power tools in the normal domestic waste!
European Directive 2012/19/EU requires that worn-out power tools be collected separately and recycled in an environmentally compatible manner.
Dustbin Icon Do not dispose of batteries in your normal household waste!
Remove the batteries from the tool before disposal. Defective or worn-out rechargeable batteries must be recycled according to Directive 2006/66/EC. Take the battery pack and/or tool to a nearby collection facility.
Please contact your local authority or town council for information about disposal options for used power tools/battery packs.
Dispose of the packaging in an environmentally friendly manner. Note the labelling on the packaging and separate the packaging material components for disposal if necessary. The packaging material is labelled with abbreviations (a) and numbers (b) with the following meanings: 1­7: plastics, 20­22: paper and cardboard, 80­98: composites.
Your local community or municipal authorities can provide information on how to dispose of the worn-out product.
The product is recyclable, subject to extended producer responsibility and is collected separately.

Kompernass Handels GmbH warranty
Dear customer,
This appliance comes with a 5-year warranty valid from the date of purchase. In the event that this product has any defects, you, the buyer, have certain statutory rights. Your statutory rights are not limited in any way by the warranty described below.
Warranty conditions
The warranty period starts on the date of purchase. Please keep your receipt in a safe place. This will be required as proof of purchase.
If any material or manufacturing fault occurs within 5 years of the product’s date of purchase, we will either repair or replace the product for you or refund the purchase price (at our discretion). This warranty service requires that you present the defective appliance and the proof of purchase (receipt) within the 5-year warranty period, together with a brief written description of the fault and of when it occurred.
If the defect is covered by the warranty, your product will either be repaired or replaced by us. The repair or replacement of a product does not signify the beginning of a new warranty period.
The X 20 V Team Series battery pack comes with a 3-year warranty valid from the date of purchase.
The warranty period and statutory claims for defects
The warranty period is not prolonged by repairs effected under the warranty. This also applies to replaced and repaired components. Any damage and defects present at the time of purchase must be reported immediately after unpacking. Repairs carried out after the expiry of the warranty period shall be subject to a fee.
Scope of the Warranty
This appliance has been manufactured in accordance with strict quality guidelines and inspected meticulously prior to delivery.
The warranty covers material faults or production faults. The warranty does not extend to product parts subject to normal wear and tear or to fragile parts which could be considered as consumable parts such as switches or parts made of glass.
The warranty does not apply if the product has been damaged, improperly used or improperly maintained. The directions in the operating instructions for the product regarding the proper use of the product are to be strictly followed. Uses and actions that are discouraged in the operating instructions or which are warned against must be avoided.
This product is intended solely for private use and not for commercial purposes. The warranty shall be deemed void in cases of misuse or improper handling, use of force and modifications/repairs which have not been carried out by one of our authorised service centres.
The warranty period does not apply to

  • Normal reduction of the battery capacity over time
  • Commercial use of the product
  • Damage to or alteration of the product by the customer
  • Non-compliance with safety and maintenance instructions, operating errors
  • Damage caused by natural hazards

Warranty claim procedure

  • To ensure quick processing of your case, please observe the following instructions:
  • Please have the till receipt and the item number (IAN) 367231_2101 available as proof of purchase.
  • You will find the item number on the type plate on the product, an engraving on the product, on the front page of the operating instructions (below left) or on the sticker on the rear or bottom of the product.
  • If functional or other defects occur, please contact the service department listed either by telephone or by e-mail.
  • You can return a defective product to us free of charge to the service address that will be provided to you. Ensure that you enclose the proof of purchase (till receipt) and information about what the defect is and when it occurred.

http://www.lidl-service.com

  • You can download these instructions along with many other manuals, product videos and installation software at www.lidl-service.com.
  • This QR code will take you directly to the Lidl service page (www.lidl-service.com) where you can open your operating instructions by entering the item number (IAN) 367231_2101.

warning 2 WARNING!

  • Have your tools repaired by the Service Centre or a qualified electrician and only use genuine replacement parts. This will ensure that the safety of the tool is maintained.
  • Ensure that the power plug or the mains cable is replaced only by the manufacturer of the tool or by an approved customer service provider. This will ensure that the safety of the tool is maintained.

Service
Service Great Britain
Tel.: 0800 404 7657
E-Mail: [email protected]
Service Ireland
Tel.: 1890 930 034 (0,08 EUR/Min., (peak)) (0,06 EUR/Min., (off peak))
E-Mail: [email protected]
IAN 367231_2101
Importer
Please note that the following address is not the service address. Please use the service address provided.
KOMPERNASS HANDELS GMBH
BURGSTRASSE 21
44867 BOCHUM
GERMANY
www.kompernass.com

Translation of the original Conformity Declaration
We, KOMPERNASS HANDELS GMBH, document officer: Mr Semi Uguzlu, BURGSTR. 21, 44867 BOCHUM, GERMANY, hereby declare that this product complies with the following standards, normative documents and EC directives:
Machinery Directive (2006/42/EC)
EC Low Voltage Directive (2014/35/EU, charger only)
EMC (Electromagnetic Compatibility) (2014/30/EU)
RoHS Directive (2011/65/EU)*
* The manufacturer bears full responsibility for compliance with this conformity declaration. The subject of the declaration described above meets the requirements of Directive 2011/65/EU of the European Parliament and Council of 8 June 2011 on the limitations of the use of certain dangerous substances in electrical and electronic tools.
Related harmonised standards
EN 62841-1:2015
EN 62841-2-1:2018/A11:2019
EN 60335-2-29:2004/A11:2018
EN 60335-1:2012/A2:2019
EN 62233:2008 EN 55014-1:2017/A11:2020
EN 55014-2:2015
EN IEC 61000-3-2:2019
EN 61000-3-2:2014
EN 61000-3-3:2013/A1:2019
EN 61000-3-3:2013
EN IEC 63000:2018
Type/tool designation: Cordless Impact Drill 20V PSBSAP 20-Li B2
Year of manufacture: 06­2021
Serial number: IAN 367231_2101
Bochum, 10/06/2021

Semi Uguzlu –
Quality Manager –CE SYMBOL
We reserve the right to make technical changes in the context of further product development.
Ordering a replacement battery
If you want to order a replacement battery for your tool, you can do so easily via the Internet on www.kompernass.com or by telephone.
Due to limited stocks, this item may sell out in a relatively short time.
NOTE Online ordering of replacement parts is not possible in all countries.
In this case, please contact the Service hotline.
Telephone ordering
Service Great Britain Tel.: 0800 404 7657
Service Ireland Tel.: 1890 930 034 (0,08 EUR/Min.; peak · 0,06 EUR/Min.; off-peak)
To ensure fast processing of your order, have the article number of your tool to hand (e.g. IAN 367231_2101) in case of questions. The article number can be found on the type plate or the title page of these instructions.



More Manuals From PARKSIDE