SAMSUNG SWA-8500S 2.0 Speaker System Wall Mountable manual

SAMSUNG SWA-8500S 2.0 Speaker System Wall Mountable

Specifications

Item Weight
1.54 pounds
Product Dimensions
‎3 x 3 x 5.7 inches
Batteries
‎3 AAA batteries
Speaker Type
Surround
Recommended Uses For Product
Movies
Mounting Type
Bar Mount, Plug Mount, Wall Mount
Brand
SAMSUNG

Introduction

Feel the force of the surround sound. The wireless rear speaker attachment kit will boost your surround sound, taking it to the next level for more dramatic entertainment, thanks to the ease of wireless and simple connection with the Samsung soundbar. 20Hz–20 kHz is the frequency range. Samsung SWA-8500S Wireless Rear Speakers will enhance your current audio setup. Connect the additional speakers wirelessly via Wi-Fi to get great sound all around and to enjoy the immersive, clutter-free experience. Feel the strength and depth of your favorite films and TV shows by adding a new level to your home audio experience.

What’s In the Box?

Wireless Receiver Module
Surround Speaker (2EA)
Power Cord (3903-001117)
Speaker Cable (2EA) (AH81-02137A)

Safety Information

Thank you for purchasing this product (SWA-8500S).

This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
CAUTION
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.
This symbol indicates that important literature concerning operation and maintenance has been included with this product.

Class II product
This symbol indicates that a safety connection to electrical earth (ground) is not required.’

AC voltage
The rated voltage marked with this symbol is AC voltage.

DC voltage
The rated voltage marked with this symbol is DC voltage.

Caution
Consult Instructions for use: This symbol instructs the user to consult the user manual for further safety-related information.

The slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.
Do not place this apparatus in a confined space, such as a bookcase, or built-in cabinet, unless proper ventilation is provided.
Do not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.–
Do not place vessels (vases etc.) containing water on this apparatus.
A water spill can cause a fire or electric shock.
Do not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, ina wet basement, or near a swimming pool, etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.
Do not overload wall outlets, extension cords or adaptors beyond their capacity, since this can result in fire or electric shock.
Route power-supply cords so that they are not likely to be walked on or pinched by items placed on or against them. Pay particular attention to cords at the plug end, at wall outlets, and the point where they exit from the apparatus.
To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power-line surges.
Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local electrical supply.
Never insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.
To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.
Make sure to plug the power cord in until it is firmly seated. When unplugging the power cord from a wall outlet, always pull on the power cord’s plug. Never unplug by pulling on the power cord. Do not touch the power cord with wet hands.
If this apparatus does not operate normally in particular, if there are any unusual sounds or smells coming from it – unplug it immediately and contact an authorized dealer or service center.
Maintenance of Cabinet.
Before connecting other components to this product, be sure to turn them off.
Be sure to pull the power plug out of the outlet if the product is to remain unused or if you are leaving the house for an extended period of time (especially when children, elderly, or disabled people will be left alone in the house).
Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat or the insulation to deteriorate.
Contact an authorized service center for information if you intend to install your product in a location with heavy dust, high or low temperatures, high humidity, chemical substances, or where it will operate 24 hours a day such as in an airport, a train station, etc. Failing to do so may cause serious damage to your product.
Use only a properly grounded plug and wall outlet.
- An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)
To turn this apparatus off completely, you must disconnect it from the wall outlet. Consequently, the wall outlet and power plug must be readily accessible at all times.
Do not allow children to hang on the product.
Store the accessories (battery, etc.) in a location safely out of the reach of children.
Do not install the product in an unstable location such as a shaky self, a slanted floor, or a location exposed to vibration.
Do not drop or strike the product. If the product is damaged, disconnect the power cord and contact a service center.
To clean this apparatus, unplug the power cord from the wall outlet, and then wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air fresheners, lubricants, or detergent. These chemicals can damage the appearance of the product or erase the printing on the product.
Do not expose this apparatus to dripping or splashing. Do not put objects filled with liquids, such as vases, on the apparatus.
Do not plug multiple electric devices into the same wall socket. Overloading a socket can cause it to overheat, resulting in a fire.

WARNING

TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES AND OTHER ITEMS WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.
This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

FCC NOTE (for U.S.A)

Class B FCC Statement
The included module(s) has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures

Reorienting or relocating the receiving antenna.
Increasing the separation between the equipment and receiver.
Connecting the equipment to an outlet that is on a different circuit than the radio or TV.
Consulting the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated so there is at least 8 inches (20 cm) between the radiator and your body. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.

FCC Caution

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions, use shielded cables and connectors for connections.

Precautions

Ensure that the AC or DC power supply in your house complies with the power requirements listed on the identification sticker located on the back of your product. Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation (3~4 inches). Make sure the ventilation slots are not covered. Do not place the unit on amplifiers or other equipment which may become hot. This unit is designed for continuous use. To fully turn off the unit, disconnect the AC plug from the wall outlet.
Do not expose the unit to direct sunlight or other heat sources. This could lead
to overheating and cause the unit to malfunction.
Unplug the Power cord from the AC wall socket if the unit malfunctions. Your product is not intended for industrial use. It is for personal use only. Condensation may occur if your product has been stored in cold temperatures. If transporting the unit during the winter, wait approximately 2 hours until the unit has reached room temperature before using it.
If the electricity supplied to your home is rated at 240V AC, use a suitable plug adapter to connect this unit to your electrical outlets.

Important Safety Instructions

Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference.

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including AV receivers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where it exits the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when you intend to leave it unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

NOTES

Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
Weight and dimensions are approximate.
For more information about the power supply and power consumption, refer to the label attached to the product.
Dispose of unwanted electronics through an approved recycler.
To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect or call (877) 278 – 0799

Open Source License Notice

To send inquiries and requests regarding open sources, contact Samsung via Email ([email protected])

Connecting the SWA-8500S to a Soundbar

Connect the Wireless Receiver Module to 2 Surround Speakers
Use the speaker cables to connect two surround sound speakers to the Wireless Receiver Module. The speaker cables are color-coded.
When connecting the speaker cables to the Wireless Receiver Module, follow these steps
Insert the grey plug into the grey jack on the Wireless Receiver.
Insert the blue plug into the blue jack on the Wireless Receiver.
When connecting the speaker cables to the surround speakers, follow these steps
Match the speaker cable connected to the grey jack to the speaker with the grey label.
Match the speaker cable connected to the blue jack to the speaker with the blue label.
Insert the red and black colored ends of each speaker cable into the red and black jacks of the appropriate speakers.
The labels are on the backs of the speakers.
Check the standby status after plugging into an electrical outlet
Plug the Wireless Receiver Module power cord into an electrical outlet and into the Wireless Receiver Module to turn on the Wireless Receiver Module. The LINK LED indicator (blue LED) on the Wireless Receiver Module blinks. If the LED does not blink, refer to step 7 on page 9.

Turn off the Soundbar
Turn off the Soundbar using the Soundbar’s remote control or by pressing the (Power) button on the main Soundbar unit.

The image of the Soundbar may differ from your Soundbar, depending on the model.

Configure “ID SET” using the Soundbar’s remote control
Press the VOL button on your remote control for 5~6 seconds until the “ID SET” message appears on your Soundbar display.

The image of the Soundbar may differ from your Soundbar, depending on the model.

Turn on the Soundbar
Turn on the Soundbar using the Soundbar’s remote control or by pressing the (Power) button on the main Soundbar unit.

The image of the Soundbar may differ from your Soundbar, depending on the model.

Check if the LINK LED is solid blue (connection complete)

The LINK LED indicator stops blinking and glows a solid blue when a connection is established between the Soundbar and the Wireless Receiver Module.

If the SWA-8500S does not connect, take the necessary steps according to the LED Indicator’s status

Frequently Asked Questions

How stable is the connection with the soundbar? Has anyone experienced gaps in the playback?
The wireless connection from our sound bar to the receiver for the rear speakers has been solid. We have experienced absolutely no gaps or dropped connections. I did have to raise the volume for the surround speakers (do this in the soundbar settings) to the max which is 6. We are amazed at the quality of the sound. Well pleased with the purchase.
How long are the cables or can I make my own?
The speaker wires are more like 10 feet long. Both of them. If you want to run one speaker on the other side of a room, you’re gonna have to splice the speaker wire to make it longer.
Can I use other speakers with this unit?
Yes, but check the rated power of the speakers versus the rated power of the receiving Bluetooth amp so you don’t damage either of them.
Will this work with a Samsung HW 550 soundbar?
If you have the HW-H550 you are out of luck. The HW-M550 works with the SWA-8500S wireless speakers. Go to the Samsung web page and you can find what soundbars are compatible with the SWA-8000, SWA-8500S, and SWA-9000S/ZA wireless rear speakers. I have the MS-650 sound bar and SWA-9000S/ZA rear speakers. I really enjoy the sound.
Which rear speakers go with the QR70 sound bar?
I looked up the HW-Q70R sound bar on Samsung’s home page and it shows the SWA-8500S rear speaker kit for that bar.
Do these create actual surround sound or just “accent” sound?
The rear channels are discrete in other words it is a true surround.
Does this product only work w designated Samsung soundbars?
Yes, it has to match the correct sound bar … the newer sound bars hook up surround via the app which requires the newer surround speakers.
Could I use my own speakers with the wireless receiver? I have speakers in the ceiling so I want to keep them.
It depends on the efficiency of your ceiling speakers. If they are high in efficiency, you can use them. If they are less than 89 DB, you may not hear them even at max volume.
I want to sync Samsung q80r with ceiling speakers (likely sonance mag6r). by buying the rear kit will it allow the bar & ceiling speakers to sync?
The setup I had synced up but the ceiling speakers have a transmitter sort of box that the ceiling speakers are hardwired to. Said transmitter syncs up to the sound bar and woofer
Will these work with a Vizio sound bar?
It’s not the best system. It’s hard to keep the Samsung sound bar and these speakers connected via Bluetooth with a Samsung tv.