Loading manuals...

Schlage Encode Smart Deadbolt Manual


Schlage Encode Smart Deadbolt Manual Image

Schlage Encode Smart Deadbolt

Schlage Encode Smart Deadbolt

Quick Start Guide

schlage.com/encode-workswith

Visit schlage.com/encode-workswith  to setup and control your  with your smartphone.

      • Flashes when lock is connecting to WiFi to check for updates.
      • Flashes after code is entered when battery is low.
      • Solid when battery is critical. The lock will not work without new batteries.

      • Flashes white on every digit that is entered.
      • Amber when using manual programming mode.
      • Turns on keypad backlight.
      • Starts WiFi connection process.
      • Checkmark flashes when code entry is correct.
      • Checkmark flashes when manual programming are successful.
      • Locks the lock.
      • Turns on keypad backlight if the lock is locked.
      • “X” flashes for a wrong user code.

Phillips screwdriver Don’t use a power drill!

Remove the entire deadbolt, including the bolt. You may also want to remove the strike. A standard Schlage deadbolt is shown. Check with your specific deadbolt manufacturer if you need help.

Need Help?

Visit schlage.com/faqs-encode

You may have to adjust your bolt length. Make sure the slot in the bolt is centered in the hole.

Need Help?

Trouble installing the strike reinforcer?
Visit schlage.com/faqs-encode and follow interactive instructions.

If you have a window next to your door, you may not be able to use the longer wood screws to install the reinforcer.

Is it hard to install the touchscreen?
Is the tailpiece not installing correctly?
If your through-hole seems too small, you may need to remove the spacer. Visit schlage.com/faqs-encode.

Route the cable through the door BELOW the bolt. Align the tailpiece as shown and push the touchscreen onto the door.

Phillips screwdriver Don’t use a power drill! You may damage your lock!

Route the cable under the bolt and through the hole on the bottom of the backplate. Secure the backplate with screws. Make sure the outside touchscreen is straight before tightening screws all the way.

Tuck the cable and connector in the space above the spindle.

Phillips screwdriver Don’t use a power drill! You may damage your lock!

If the bump on the tailpiece doesn’t align with the slot in the back of the inside assembly, make sure your thumbturn is vertical (up and down).

Your lock is now installed! Remember, you still have to set up your lock to use it.

1. Open your door!
2. Enter one of the two default user codes.
3. Your lock will enter a setup routine. When the bolt stops moving, setup is complete.

1. Close your door.
2. Extend and retract the bolt using the inside thumbturn.
3. Make sure the bolt retracts smoothly.
4. Open your door.
5. Extend the bolt using the inside thumbturn.
6. Now enter a user code at the touchscreen.

Need Help?
If the bolt doesn’t extend or retract during testing,visit schlage.com/faqs-encode.

Now that your lock is installed

you can use a smart home system to lock and unlock your door from anywhere and add user codes for guests and household members.

Visit schlage.com/encode-workswith for a list of compatible smart home apps that allow you to control your with your smartphone.

You can also lock your door from inside by turning the thumb turn toward the door edge.

You can also unlock your door from inside by turning the thumb turn away from the door edge.

Questions about your new
Smart WiFi Deadbolt?

Please don’t return it to the store!

Let us help you first!

www.schlage.com/faqs-encode

© Allegion 2018
Printed in U.S.A.
P518-415 Rev. 08/18-d

DOWNLOAD RESOURCES

  • Schlage Encode Smart Deadbolt User Manual – Optimized PDF
  • Schlage Encode Smart Deadbolt User Manual – Original PDF

FAQ’S

How do you change the code on a Schlage encode deadbolt?

Code press the outside Schlage button enter the current programming. Code. Then press three enter. The new six digit programming. Code. Enter it again to confirm.

How do I program Schlage Encode smart WIFi deadbolt?

After the deadbolt is installed insert the battery pack and observe the power up confirm that the deadbolt beeps. And that the keypad lights. Up. If the lock does not beep or the keypad lights do not

How long do Schlage encode batteries last?

It provides room for four AA batteries, which Schlage says can last up to six months when the lock is used on Wi-Fi or up to a year if you use it with Thread.

Can Schlage Encode be hacked?

Our Schlage Encode Smart WiFi Deadbolt, Schlage Sense™ Smart Deadbolt, Schlage Connect™ Smart Deadbolt with Alarm, and Schlage Touch™ Keyless Touchscreen Deadbolt and Lever have all received a grade A in security, the best possible grade to keep your home, and everything inside it, safe.

Does Schlage Encode come with a key?

Schlage provides the first set of four AA batteries needed to operate the lock, and it comes with one (and just one) mechanical key should the batteries die. As with most smart locks, the Encode has a too-short electrical cable that connects the lock’s circuit board to its power supply.

What if I lost my Schlage programming code?

The default programming code is printed on a label on the programming guide that came with your lock. If you do not have access to the guide, remove the lock from the door and look on the back of the lock for a label containing the default code.

How do you open a Schlage lock with a dead battery and no key?

Touch a new high-quality alkaline 9-volt battery to the contacts below the bolt throw.
Wait for 1 red light and then 3 green lights with 3 beeps.
Present a valid credential.
Rotate the bolt throw away from the door edge.
Replace the batteries.

Do Schlage locks have a lifetime warranty?

Schlage stands behind its products and will continue to do so with a limited lifetime mechanical and finish warranty, a three-year limited electronics warranty and dedicated resources, customer support and innovation.

Do Schlage locks have cameras?

The lock’s integration with Key enables users to operate their deadbolt in concert with Ring video doorbells and cameras, streamlining control of their home’s security. Ring customers will now be able to lock and unlock their door directly from the Live View of their camera in the Ring app.

Does Schlage Encode have backlight?

The Schlage Encode comes with a backlit keypad and a traditional keyway. The lock is powered by four AA batteries, set in the back of the lock.

Why is my Schlage lock blinking red?

The Schlage button flashes red continuously. It”s mean… The battery is dead. You will need to replace the battery immediately.

What happens if Schlage battery dies?

If the battery is dead and you need to unlock the door, you can perform an emergency battery jump start. Follow these steps to perform an emergency jump start. Connect a new high-quality alkaline 9-volt battery to the contacts below the touchscreen and listen for the long beep.

VIDEO

Schlage Encode Smart Deadbolt
www://schlage.com/


More Manuals From Schlage