Vivitar 360 Sky View Video Drone

Vivitar 360 Sky View Video Drone

DRC-888/X-98
GPS
FOLLOW ME TECHNOLOGY

PRE-FLIGHT CHECKLIST

Before attempting to fly your drone, make sure that you have clone all of the following.

• Inserted 4 AA Batteries in Your Remote
  See page 7 of this manual for more information.
• Charged Your Drone Battery
  See page of this manual for more information.
• Check That the Propellers are Firmly Attached
  See page 21 of this manual for more information.
• Calibrated Your Drone with the Remote Control
  See page 9 of this manual for more information.
• Calibrated Your Drone’s Gyroscope
  See page 9 of this manual for more information.
• Complete the compass calibration process,
  see the page 9-10 this manual for more information.
• Unlock your drone.

WARNING

Faure to to your drone before flight can lead to severe flight malfunctions and potential damage your Drone. Always fly carefully!

For more information and la instructional videos…I your drone, scan rho QR code.

Introduction

Thank you for purchasing the Vivitar 360 SKYVIEW Video Drone, item DRC6368. The included remote controlled aircraft is designed specifically for outdoor flying In order to get the best possible results please read this user’s manual carefully before using. In addition, be sure to keep this manual in a safe place for future reference.

Features

• 2.4Ghz Remote Control System and Wi-Fi Control
• GPS Navigation
• Follow ME Technology
• Full HD360 Camera with Live Video Feed, Real Time Transmission
• Real Time Viewing
• 2X-GPS
• 1000ft Range

Important Safety Precautions

When using your Vivitar 360 SkEVEview Video Drone, basic safety precautions should always be followed, including the following:

1.  Do not allow children or the infirm to operate your drone without adult supervision. For safety purposes, only allow experienced pilots aged 14 and up fly your drone.
2. To avoid choking hazards, keep all small parts and pieces away from children.
3. Your drone is not a toy. Makes sure that it is properly assembled before use, and operated safely.
4. Keep your drone away from obstacles, crowds, power lines, trees, and bodies of water while it is in flight. Always fly your drone in a wide open spacious environment. Avoid flying your drone directly above people or animals. Maintain a 7ft (2m) distance from the aircraft when taking off and landing,
5. Only use your drone in a dry environment. Your drone is composed of sophisticated electronic components and Ferts. To avoid damage to your drone, please keep your drone away from water and moisture. Use a soft dry cloth to wipe the surface of your drone and keep it clean.
6. Beginner and novice level pilots should practice flying with experienced pilots until suitably experienced in flight.
7. To ensure safety. only use the included parts when using your drones. a Make sure to keep your ears and eyes protected when using your drone. When your drone’s blades are spinning, make sure to keep people and objects at a distance from rotating parts.
8. Keep your drone away from excessive heat or flames, especially while charging the battery.
9.  Please recycle or dispose of your drone properly based on the laws and rules of your municipality. Contact local recycling facilities and/or the manufacturer of your speaker for further information.

Package Contents

Specification

• Weight: 710g
• Battery : 7.4V Lithium Polymer Battery
• Height: 168mm Diameter: -350mm
• Charging Time: -5 hours
• Flying Time Per Charge: -10 minutes

A quick look at your Drone

A quick look at your remote control

Inserting Batteries into your remote

Use a screwdriver to open up the battery compartment located on the rear of your remote control.
Insert 4 AA15V batteries, making sure that the batteries are inserted with the correct polarity (u,-) as displayed in the battery compartment.

Once the batteries are inserted, put the battery compartment cover back on the battery compart-ment, and use a screwdriver to close it securely.

Warning:

• Do not mix rechargeable and non-rechargeable batteries.
• Do not mix old and new batteries or different types of batteries.
• Remove exhausted batteries and dispose of them based on the rules of your local municipality.
• Remove the batteries from your remote control if it will not be in use for an extended period of time.

Charging  your Drone’s Battery.

Use included charging adapter to charging Drone’s Battery.

Charging takes about five hours to complete.

Warning

• It is recommended to use a 5V,1-2A charger (not included) to charge your battery.
• Do not leave the charger unattended in the presence of children.
• Do not expose the battery to excessive heat or flames.
• While charging your battery, keep it away from flammable materials.
• When the quadcopter’s battery is on low power and cannot fly, the power switch of quadcopter must be turned off.

Once your battery is fully charged it can be inserted directly into the battery slot on the underside of your drone.

Calibrating Your Drone (Preparing for Flight)

TO power on your drone, slide the ON/OFF switch on the bottom of your drone to the ON position. To power on your remote control, press the ON/OFF button. Once your drone and remote control are powered on, follow the calibration steps below in order to prepare your drone for flight.

Calibrating Your Drone with Your Remote Control

• Pull the throttle stick all the way down and then push it all the way up.
• When the LED lights on the rear legs of your drone are solid blue and the LED lights on the front legs of your drone are solid red then your drone is synchronized with your remote control and ready to fly.
• When the LED lights on the rear legs of your drone are solid green and the LED lights on the front legs of your drone are solid red then your drone is in GPS mode.

Calibrating Your Drone’s Internal Gyroscope

Calibrate your drone’s Internal gyroscope to ensure smooth and balanced flight. Before you start. make sure your drone is placed on a flat, stable surface.

• Pull the throttle stick and the directional stick all the way down and to the left simultaneously. Release them after about 2-3 seconds.
• The LED lights on the rear legs of your drone will turn blue and green and start blinking rapidly. The LED lights on the front legs of your drone will turn red and start blinking rapidly while synchronizing.
• The LED lights on the rear legs of your drone will turn solid blue, and the LED lights on the front legs of your drone will turn solid red to indicate that your drone’s internal gyroscope is calibrated.

Aircraft Compass Calibration

The aircraft compass calibration allows your drone to be tracked over CPS. Before you start, make sure your drone is placed on a flat, stable surface.

• Press the geomagnetic calibration button on the remote control.

• Rotate your drone horizontally, spinning it in a clockwise direction for 3 revolutions. The lights on the front legs of your drone will solidly shine red, while the lights on the back legs of your drone will solidly shine green.

-Turn the head downwards and rotate your drone vertically, spinning it for 3 revolutions When you see green lights shining solidly, calibration is complete.

Warning:

• When flying your drone in CPS mode, make sure you are in a wide open space.
• Do not calibrate your drone in areas where there are strong magnetic fields.
• When calibrating, do not carry ferromagnetic materials such as keys or cell phones.
• Do not calibrate near large sheets of metal.

Locking and Unlocking Your Drone

Unlocking Your Drone

If your drone is locked, push the throttle stick all the way up and the pull it back to its mid-point and your drone will be unlocked.

Locking Your Drone

With your drone in a landed position, pull the throttle stick all the way down and hold it down for approximately 3 seconds. The motor will stop and your drone will be locked in place.

Flying Your Drone

Pre-Flight Preparation

If you have never used a drone before and you are not an experienced pilot, make sure to read these instructions carefully before flying. Get familiar with all of the controls. If necessary, read through these instructions many times and practice handling the remote control until you feel completely comfortable and ready.

1.  Place your drone M a clear, open field, Make sure that it is resting on a secure. flat surface.
2. Practice using the throttle stick and the directional control stick (see below).
3. By simulating the use of the remote and both sticks, you will grow more comfortable with the natural motions required during flight and you will learn to react more rapidly to unexpected circumstances.

One Key Takeoff & Landing

Once your drone is unlocked, you can press the one key takeoff button and the drone will automatically hover 1.5 meters above the ground.

By pressing the one key landing button, your drone will automatically land on the ground.
One Key Landing

Headless Mode

Headless mode allows users to fly their drone without worrying about the drone’s orientation. Regardless of which way the drone is facing, this function ensures that the drone will always follow controls from your perspective all the time.

To enter headless mode, before your drone takes oft stand in front of your drone and press the headless mode button on your remote control.

Return Functions

When your drone is properly calibrated to be tracked over CPS, then you can use multiple return functions which allow your drone to return to a specific destination.

NOTES

1. In order to make sure that your drone can be tracked over CPS, complete the “aircraft compass calibration’ process discussed earlier in this manual.
2. You can use the  Vivitar SkyEYEview app to view your Drone’s GPS Status.
3. Make sure to fly your drone in clear areas with strong GPS signal in order to use the return to home functions successfully.

Smart Return Function

One The Smart Return Function returns your drone to the location of Key your remote control or phone. Push the one key return button on Return your remote control, or the corresponding button in the Visitor SkyEVEview app to enter Smart Return mode. When in Smart Return mode, you can use the directional control stick to control the drone’s landing point. Push the throttle stick to exit Smart Return mode.

NOTE: If CPS signal and remote control signal is lost for more than 6 seconds while In Return to Home mode, the drone will descend slowly until it lands on the ground.

Failsafe Return Function

If CPS signal and remote control signal is lost for more than 6 seconds while flying, the Failsafe Return Function automatically returns your drone to the origin of its flight. This feature is only available when you begin your flight with a strong GPS signal.

NOTE: When in Failsafe Return mode, your drone is unable to automatically avoid obstacles.

Follow Me Flight Mode

When your remote control and your drone receive GPS signal. press the follow me flight button on the remote control and your drone will automatically fly towards the remote control and follow it as is moves around.

When in follow me flight mode, the drone will stay between 4-20 meters of your remote control. Push the directional control stick forward to more the drone further from the remote control. Pull it back to bring the drone closer to the remote control. If the drone gets closer than 4 meters to the remote control or further than 20 meters away, then press the follow me flight button again to bring your drone back in range.

Follow me flight mode can be used with both your remote control or your phone. If you are using both together. your drone will stay within range of your remote control

GPS Surround Flight Mode

When your remote control and your drone receive CPS signal, press the GPS Surround Flight button on the remote control, and your drone will automatically fly in circles around the remote.

When in GPS Surround Flight. push the directional control stick to the left and the drone will fly in counterclockwise circles. Push the directional control stick to the right and the drone will fly in clockwise circles. Push the directional control stick forward to enlarge the radius of the circle or pull it backwards to shrink the diameter of the circle.

Emergency Stop Function.

If your drone is flying abnormally press rho one key return button and the CPS surround flight cottons on your remote control simultaneously to trigger an emergency stop.

Using the Vivitar SkyEYEview App

Connect Mobile Phone Holder to the Remote Control

Download the Vivitar SlcyEYEview App

Go to the Ape Store or Google Play store and search for the Vivitar SkyEYEview app. Follow the instructions to proceed to download the app. You can al.o neon the applicable OP code below

Using WIFI to Connect the Drone to Your Phone

• Power on your drone. LED lights will illuminate to indicate that it is powered on.
• On your mobile phone, find the WIFI Settings menu. Select the network labeled SKEYE WiFi-xxxxxx in order to sync your drone with your phone.
• Open the Vivitar SkyEYEview application on your phone. Press the “TAKE OFF” option on the menu screen in order to open the control interface.

Control interface Function

Manu Screen Option

Tab ” TAKE OFF”  to access the control interface.

Tab ” Photos and Videos” to view photos and videos recorded with your drone’s camera.

For more information on using your drone Tab ” Instructions”

Troubleshooting

Problem: During calibration, the red lights on the front legs as well as green and blue lights on the rear legs flash slowly.
Solution: The drone and remote control are not recognizing each other. Turn both units off, urn them back on and then try calibrating your drone and remote control again.

Problem: The drone is not connecting to CPS.
Solution: There may not be a strong enough COS signal available. Try moving outside to a clear spacious area. Then reattampt the compass calibration process.

Problem: The drone won’t unlock.
Solution: The drone’s battery may be drained. Try replacing or recharging the battery. Also, the remote control and the drone may not be synchronized. Try turning both off and then try recali-brating them.

Remote Control Light Indicators

The green light is flashing slowly
The remote control is still calibrating.

The green light is flashing slowly while the remote is making repeated beeping sounds.
The batteries are running low on power and need to be replaced.

There is a red light flashing slowly while the remote is making repeated beeping sounds.
The remote control is not yet sensing a GPS connection

There is a red light shining steadily.
The remote control is connected to GPS

Replacing your Propeller Battery

Remove the cap covering the Propeller.

Unscrew the propeller so that your current propeller can be remove and replaced with a new one.

Screw the new propeller on and then cap back on the propeller.

FCC Compliance Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Vivitar One Year Warranty

This warranty covers the original consumer purchaser only and is not transferable.

This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.

What Is Not Covered by Warranty

Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but limited to, repair by unauthorized parties, tampering, modification or accident.

To Obtain Warranty Service and Troubleshooting Information:

Call 1-800-592-9541 in the U.S. or visit our website at www.vivitarcom.

To receive Warranty service along with the name and address of an authorized product service center, the original consumer purchaser must contact us for problem determination and service procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the product is within the applicable Warranty period, MUST be presented in order to obtain the requested service. It is your responsibility to properly package and send any defective products along with a dated copy of proof of purchase, a written explanation of the problem, and a valid return address to the authorized service center at your expense. Do not include any other items or accessories with the defective product. Any products received by the authorized service center that are not covered by warranty will be returned unrepaired.

Downloads Resources

• Vivitar 360 Sky View Video Drone User Manual – Download [optimized]
• Vivitar 360 Sky View Video Drone User Manual – Download

FAQ’S

What app do you use with the Vivitar Skyview drone?

VIVITAR SKYEYEVIEW is a new type of flight toy control App. Our aircraft has a panoramic camera, which can be used for real-time communication through WiFi and mobile App. The new panoramic preview in App can watch real time images at 360 degrees. The upgraded version of the aircraft is installed with the GPS module.

How do I connect my Vivitar drone to my phone?

And you’ve turned on your the drone all you do is you go to the app you go to your phone and go to where you you can connect to the Wi-Fi settings.

How long can a drone fly without recharging?

Taking the average flight times of these popular higher-end consumer drones, you end up with around 28 minutes of expected flight time. Not bad, considering how much ground you can cover in half an hour. Add on to that a second battery, and you can be in the air for around an hour, almost uninterrupted.

How long do drones fly on a charge?

A typical consumer drone can fly typically between 10 to 30 minutes, while more advanced professional drones can fly for even an hour or more.

Do drones need WiFi?

A drone can fly without WiFi or cell service. Access to the internet is only required when downloading a program for your drone or doing a system update. Once the download is complete, the internet is no longer needed. However, some drone features are enhanced with WiFi or cell service.

How do you reset a drone?

Hold down the power button on the drone for 9 seconds (for DJI drones) until you hear three beeps. Then do the same on the controller. The next thing is to power off both the controller and the drone.

Do Drones Use Bluetooth? 

Bluetooth is a popular technology for connecting to drones and controlling them via an app. Because of its range, this type of communication is often found in toy drones. Bluetooth can reach 100m maximum connectivity in ideal conditions, while WiFi can reach 1000m.

How high can a Vivitar drone fly?

The Vivitar AeroView quadcopter video drone is the only drone you need. With a full HD camera with live video feed over wifi, you can see real time what you are flying over. With follow me technology and GPS tracking you can always get the perfect shot! The drone has a range of 1000 feet and a 12 minute flight time.

How do you control a Vivitar drone?

TO power on your drone, slide the ON/OFF switch on the bottom of your drone to the ON position. To power on your remote control, press the ON/OFF button. Once your drone and remote control are powered on, follow the calibration steps below in order to prepare your drone for flight.

Why is my drone not connecting to remote?

In simple terms, if your drone is not pairing with your controller, you should: Make sure both batteries have got enough charge in them. Switch the batteries with new ones. Pair the controller correctly to the drone using the correct procedure.

Why is my drone blinking red?

Flashing red, your device is indicating an IMU error.

How do you know if a drone is recording?

Radio: If you think you are being spied on, the best way of confirming this is by using radio counter-surveillance systems to track down the drone. A radio counter-surveillance system decodes radio waves generated by the drone and makes a pattern to show where the signals are coming from.

VIVITAR DVR922HD 4k Dual-Screen Action Cam

Precautions

Please read the precautions carefully before using this video camera for proper and safe operation, to optimize its performance and extend its life.

1. Before using the camera, please format the memory card, and then to insert to camera.
2. Take good care of the video camera and prevent water or sand particles from entering the video camera when it is used on the beach or water, because water, sand particles, dust or component containing salt may damage the video camera.
3. Keep the video camera free of dust and chemical materials. Keep it in a cool, dry and well ventilated environment. Do not keep the video camera in a high temperature, moist or dusty environment.
4. Please check if the video camera operates normally before use.
5. If dirt or stain is accumulated on the video camera or on its lens, use soft, clean and dry rag to wipe it away gently. If the video camera or its lens is stained with sand particles, blow them away gently. Do not use a cloth to wipe the surface. Otherwise, it may scratch the surface of video camera or its lens.
6. If it is required to clean camera surface, firstly blow away the sand dust accumulated on this surface, and then wipe the camera gently with rag or tissue applicable to optical equipment. Please use the cleaning agent of video camera for wiping if necessary. Do not use organic solvent to clean the video camera.
7. Do not touch the lens surface with fingers.
8. Please back up the data if the memory card inside this video camera is used for the first time.
9. The externally installed memory cards are manufactured from precise electronic components. Data may be lost or damaged under the following circumstances:
   1. Improper use of the memory card.
   2. The memory card is bent, dropped or scratched.
   3. Place it under high temperature or moist environment or expose to sunshine directly.
   4. Electrostatic or electromagnetic field exists around the memory card.
   5. This memory card is taken out or power supply is interrupted when this video camera or computer is connected to the memory card (i.e. during reading, writing and formatting).
   6. Touch the metal contact surface of the memory card with fingers or metal materials.

Parts of the camera

1. 1.3inch screen
2. lens
3. 2.0inch screen
4. power on off ,mode
5. shutter
6. battery cover
7. microphone
8. battery place
9. Micro SD slot
10. USB slot
11. WIFI button

Function of camera

• Power on/off, mode
  1. long press about 3-6 second to power on the camera/ off the camera
  2. after power on, short press this button to swift between video, Photo, slow motion, playback, setting function.
• Shutter
  1. under video mode, short press this button to start and finish one video.
  2. under photo mode, short press this button to take photo.
  3. under the playback mode, short press this button to display video, and long-press this button to enter the delete file window.
  4. under the setting mode, short press this button to confirm the setting.
• WIFI button
  1. Under Video/photo/slow-motion mode, short press this button to swift front screen and back screen, long press this button to open the wifi function.
  2. Under playback mode/setting mode, short press this button can see the photo, and choose setting menu.
• USB slot
  Connect to computer, there will be three choice coming out
  1. USB mode, this function can be used as USB card reader, can copy the video and photo from USB disk.
  2. Web camera can be used as webcam.
  3. Connect to power source, can charge the camera.
• Micro SD slot
  Support 64GB max micro SD card, please using micro SD card speed above C10, and before using the camera, please format the micro SD card.

Main function

Setting Menu
Press power on/off button to enter the setting page, press shutter button to enter the setting menu.
Press power on/off button to choose the setting menu, press wifi to enter this menu, and press shutter button to confirm the choice.

1. video mode setting
2. photo mode setting
3. General Settings Menu
4. setting menu
5. exit

Video mode

1. video mode
2. current video resolution
3. Micro SD card memory left
4. Micro SD card situation
5. WIFI situation
6. battery capacity left
7. time and date

Photo mode

1. photo mode
2. current photo resolution
3. photo taken quantity
4. Micro SD card situation
5. WIFI situation
6. battery capacity
7. time and date

Wifi and app

APP download
Please do google APP market or apple APP store to download “Vivitar DVR922”.
Scan bellow QR code also can download the APP.

Open WIFI
Under video/photo/slow motion mode to long press wifi button to open wifi. Camera will show window of the wifi name and password, wifi name is “DVR922HD_XXXX”, wifi password is “12345678” . Search the wifi name on your smart phone, connect the wifi name and enter password to connect the wifi and camera.
Then open the app, start to have fun on your camera.

APP operation
After smart phone connect the camera, press APP to enter the APP as bellow.

1. exit
2. WIFI signal
3. resolution setting
4. current resolution
5. camera setting
6. photo/video data
7. shutter
8. mode choose

Specification

Vivitar V1072-WHT-OD Infinite Stereo Earphones

Specifications

• Product Dimensions:2 x 1.2 x 5.6 inches
• Item Weight: 6 ounces
• Item model number: V1072-WHT-OD
• Special Feature: Dj-style
• Connectivity Technology: Wired

What’s in the box?

• Infinite Stereo Earphones

Product Description

• Enjoy some time listening to your favorite music while chilling on the beach or just lounging around.

Features

Compatible with iPod, iPhone, iPad, Various Smartphones and Tablets Stereo quality sound with comfort Compact and light-weight Connectivity technology: Wired

How to use headphones?

Using Your HEADPHONES Press the Play button to play and pause a track. Press the Vol. Increase/Next track button to travel to the next song. … Press the Decrease Vol./Previous Track button to travel back to the previous track. Press and hold to decrease the quantity . Press the Play/Pause Button to Answer an incoming call.

How to keep clean?

Hold your earphones with the mesh side facing downwards. employing a dry, soft toothbrush (preferably a children’s toothbrush), brush the wire mesh gently to dislodge any dirt or clogged ear wax.

Frequently Asked Questions

How does one use Vivitar headphones?

Using Your HEADPHONES
Press the Play button to play and pause a track.
Press the Vol. Increase/Next track button to travel to the next song. …
Press the Decrease Vol./Previous Track button to travel back to the previous track. Press and hold to decrease the quantity .Press the Play/Pause Button to Answer an incoming call.

Do Vivitar headphones have a mic?

Product Description
Put the soundtrack to your life on play with Vivitar stereo headphones. Equipped with an in-line microphone to answer phone calls efficiently and with clear sound, these headphones facilitate your manage your music to fit your daily routine and style.

How do you use wired earphones?

With the right orientation in check, placed on the in-ear headphones. Place each ear tip on the corresponding side of your head. Pull your earlobe with the opposite hand to create enough space to gently push the ear tip inside your ear canal. counting on your personal preference, position the wire ahead or behind you.

How do I protect my headphone cables?

Coil The Cable Carefully.
So always wrap the cables safely, maybe into an ‘8’ or use the ‘alternate wrapping’ technique to wrap them up! Avoid tight loops and never tie knots! it is often better to keep them loose!

What causes earphones to break?

Pulling or tugging on the earbuds’ cords when disconnecting them. Leaving earphones dangling off tables, couches, beds, and other surfaces. Sleeping together with your earbuds in, exposing them to twisting. Carrying earphones without a case, or putting them in your pockets or bags.

Can wired earphones be repaired?

You can still fix your broken headphone wires using simpler tools. To repair damaged headphone or earphone wiring without fusing them with a hand tool , you’ll need: Wire stripper (or cutter) lighter (or sandpaper)

Why do earphones stop working on one side?

Headsets may play only in one ear counting on your audio settings. So check your audio properties and ensure that the mono option is turned off. additionally , ensure that voice levels are balanced on both earbuds

Is it OK to leave headphones plugged in?

Plugging and unplugging headphones increases the wear and tear and tear on the audio jack, but leaving them plugged altogether the time even when not using those places wear and tear on the circuitry since they’re constantly being powered.

Why are my wired headphones not working?

Check your headphone cable, connector, remote, and earbuds for damage, like wear or breakage. search for debris on the meshes in each earbud. to get rid of debris, gently brush all openings with alittle , soft-bristled brush that’s clean and dry. Firmly plug your headphones back in.

What to do if your earphones are not working?

First thing’s first, try updating your phones OS . If that does not work, try disabling Bluetooth, rebooting your phone, and attempting the connection again once everything is powered copy.

How can I stay clean?

The mesh side of your earbuds should be facing down as you hold them. Brush the wire mesh carefully with a dry, soft toothbrush (ideally a children’s toothbrush) to remove any debris or congested ear wax.

How can I fix my earphones without tools?

Fix a pair of headphones without tools in only three easy steps.
Step 1: Identify the error area.
Step 2: Twist the cord until the headset works.
Step 3: Stick the tape to fix it.
Step 1: Separate the cable.
Step 2: Connect the wire.
Step 3: Check to form sure the headphone is working.

Can a headphone jack be damaged?

Repair the headphone jack
Keep in mind that opening your device could void your warranty and may even cause irreparable damage if you didn’t do the repair correctly. It also can cause additional issues like short circuits in the headphone wires if not done properly.

Why do headphone jacks stop working?

Your phone’s audio jack could also be full of dust and debris. to wash it out, blow into the jack or use a can of compressed gas to do so. you’ll also use a cotton swab—apply a few drops of alcohol to the end of one and gently try to clean out the debris. regardless of the issue, our experts can repair your broken device fast.

How do you fix a bent headphone wire?

Grab the wire between your thumb and index . Keeping a mildly firm grip, slowly and thoroughly pass the wire through your fingers, moving from the bottom of your headphones to the end where the jack is. Repeating this process 2-3 times should significantly untwist your headphone wires.

VIVITAR IMP-3038 Bluetooth Smart Watch

INTRODUCTION

Thank you for purchasing the Bluetooth Smart Watch. You can use your device to track steps, distance, and calories. In order to get the best results, please read this manual first before using your device.

FEATURES

• Tracks steps, distance, calories burnt, and quality of sleep
• Heart rate and blood pressure monitor
• Time, alarm, and sedentary reminders
• Wirelessly syncs data to smartphones
• Receive incoming calls and text alerts
• Rechargeable battery with long battery life

SPECIFICATIONS

• Screen: 1.3” TFT
• Battery: 150mAh Rechargeable Lithium-Ion
• Bluetooth Version: Bluetooth 4.0
• Working Time: ~5 days
• Standby Time: ~10 days
• Compatibility: Android 4.2 and higher, iOS 8.0 and higher

PACKAGE CONTENTS

• Bluetooth Smart Watch
• User’s manual with warranty information

A QUICK LOOK

When wearing your smartwatch, make sure that the band is tight enough so that the sensor is making contact with your skin, but not so tight that it is uncomfortable.

CHARGING

To charge your activity tracker, follow the steps below:

1. Take the wristband off of your watch so that you can access the USB plug.
2. Slide the USB plug into a USB port on your computer, or a suitable USB charging adapter.
3. Once fully charged, the battery status indicator on the display screen will go from empty to full.

WARNING

• When connecting to the USB port, make sure the plug is inserted correctly.
• If the charging icon does not appear, be sure the plug has not been inserted upside down.

APP INSTALLATION

In order to use your smartwatch, you will first need to download the Vivitar iLive App, which is available on the Google Play Store and on the iPhone App Store.

BLUETOOTH SETUP

To use your smartwatch with your smartphone, you will first need to set up a Bluetooth connection between both devices. To do so, follow the steps below:

1. Go to your phone’s Bluetooth settings menu. Make sure that Bluetooth is turned ON.
2. Press and hold the function button on your smartwatch for approximately 4-5 seconds to power it on.
3. Open the Vivitar iLive software application on your phone.
4. If the app’s home page opens, press the Equipment icon to access Bluetooth pairing options.

BLUETOOTH SETUP

In the equipment menu, you will see the device connection status.

Connection:
View if your smartphone is paired with your smartwatch. If not, press here to connect.

USER SETUP

In order to get the best possible results when using the Vivitar iLive app, enter your personal data before using. To do so, follow the steps below.

1. Press the “Mine” icon in the lower right hand corner of the screen.
2. In the user settings menu you can explore the following settings:

Personal Data:
Input your Name, Gender, Height, Weight, and Birth Date.

Target Settings:
Input daily steps, calorie, and mileage goals.

My Device:
View System information.

Help:
Have problems using your watch? View the available help files.

About:
See what version of your app you have installed.

ACTIVITY

• When you open the iLive software application, the main activity panel will appear, showing your steps, miles, calories and sleep for the day.
• Press the Start icons to get heart rate, blood pressure or sleep measurements.
• More detailed readings will appear on the top of the screen.
• Toggle through different dates to review your history.

APP SETTINGS

For additional settings, press the “Equipment” icon.

Synchronize Data:
If you have been using your smartwatch away from your phone, press this option to make sure that all new data is recorded to your app.

Smart Alarm:
Set up different alarms so that your smart watch will vibrate at different times during the day.

Search Device:
If you misplace your watch, press here and it will begin to vibrate immediately.

Message Reminder:
This allows you to choose for the smartwatch to vibrate depending on what type of message is coming in. Note that this feature may not work with full functionality on all phones.

Shake for Selfie:
Press here and your phone’s camera screen will open. Shake your watch to snap a photo.

Band Function Setting:
This allows you to set up a series of reminders to drink water and to stay active. Your watch will vibrate to help you remember your goals. Other general settings can be accessed here.

SMARTWATCH

Press and hold the function button for approximately 4-5 seconds to power on your smartwatch. Once powered on tap the function button repeatedly to toggle through the different modes. Hold the function button down to access a mode. See below for an explanation of each mode.

• The main Display Screen Displays the current time as well as step and heart rate measurements. Also displays the battery power and if there is a Bluetooth connection.
• Steps: Displays the number of steps you have taken.

Distance:
Displays the number of miles you have traveled.

Calories:
A fire icon appears on the screen. Displays the number of calories you have burned.

Sports Mode:
Choose among different sports (running, cycling, climbing or swimming) to measure how long you spend each day exercising.

Heart Rate:
Measures your heart rate in beats per minute.

Blood Pressure:
Measures your blood pressure.

Blood Oxygen:
Measures the amount of oxygen in your blood.

Sleep:
Monitors the quantity and quality of sleep you are getting.

Stopwatch:
A basic stopwatch tool to assist you in your workouts.

Do Not Disturb Mode:
Use the do not disturb mode when you want to sleep or be sure that your smartwatch is silenced.

FCC STATEMENT

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARRANTY CARD

This warranty covers the original consumer purchaser only and is not transferable.
This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.

What Is Not Covered by Warranty:
Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but limited to, repair by unauthorized parties, tampering, modification or accident.

To Obtain Warranty Service and Troubleshooting Information:
Call 1-800-592-9541 or Visit our website at www.vivitar.com. To receive a Warranty service along with the name and address of an authorized product service center, the original consumer purchaser must contact us for problem determination and service procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the Product is within the applicable warranty period(s), MUST be presented in order to obtain the requested service. It is your responsibility to properly package and send any defective products along with a dated copy of proof of purchase, a written explanation of the problem, and a valid return address to the authorized service center at your expense. Do not include any other items or accessories with the defective product. Any products received by the authorized service center that is not covered by warranty will be returned unrepaired.

VIVITAR TWS500SPK True Wireless Bluetooth Speakers

Safety Precautions

When using your True Wireless Bluctooth® Speakers, basic safety precautions should always be followed, including:

1.  READ ALL INSTRUCTIONS BEFORE USING YOUR SPEAKERS
2.  Do not use your speakers near water. Do not place your speakers on any wet surfaces
3.  Do not allow children to play with your speakers without adult supervision.
4.  Do not expose your speakers to excessive heat, flames. or fire.
5.  Always press dll buttons carefully. Do not pull 011 the charging cable when connected to a speakers
6.  Do not use in extremely dry environments, as this can lead to static disch;;uge during usage.
7.  Do not expose the spcal<crs to temperatures above 104°F/ 40°C. Keep out of direct sunlight.
8.  Do not attempt to repair the speakers yourself. Contact a qualifi..d service center if your spe;ikers is in need of service,
9.  Do not drop. crush. throw, or expose your speakers to e)(cessive physical trauma.
10.  Your speakers is not intended for commercial use
11.  Do not place necir objects that generate a strong magnetic field.
12.  Unplug your speakers when not in use for long periods of time
13.  Do nol d,arge the speakers during lightning storms.
14.  Before using your speakers, inspect any ports to make sure that they are clear of dust and debris before charging.
15.  Use a soft cloth or paµer towel to clean the exterior of your speakers
16.  Do not put your speakers under running water. Do not allow water to enter the ports of your speaker.
17.  Never use any harsh chemicals or detergents to clean. Make sure your speakers are dry before connecting the charging cable.
18.  Please recycle or dispose of your speakers properly based on the laws and rules of your municipality. Contact local recycling facilities and/or the manufacturer of your speaker for further information.

Introduction

Thank you for purchasing the Vivitar True Wireless Bluetooth@ Speakers, item TWSSOOSPK Fill your parties and events with surround sound music arid exciting party lights. Please read this manual carefully before using your speakers.

Package Contents

• Two True Wireless Bluetooth@ Speakers
• 2 USB Charging C.able.s
• User’s Manual with warranty information

Specifications

• Bluetooth Specification: VS.3
• Bluotooth Range: Up to 33 teot (10 meters)
• Power Supply: DC SV
• Battery Type: 300mAh Lithium Battery
• Charging Time: Approximately 15-2 Hours
• Play Tim : Approximat11ly 4 Hours’”
  “Applicable at 50% of maximum volume. Results will be lower when the volume is higher

A Quick Look at Your Device

SIDE VIEWS

Bottom of Speaker

Charging Your Speaker

1.  The USB charging cable has a Micro USB plug ,and a standard USB plug
2.  Insert the USB charging cable”s Micro USB plug into the charging port on your speaker
3.  Insert the USB charging cable”s standard USB plug Into the USB port of a computer  USB diarging adapter ors
4.  The Light indicator turns red while the speaker is charging. The light will turn ott when charging is complete.

NOTES

• Charging c<1n takes <1pproxirnately 2 hours to complete when the battery is fully drained.
• Remove the charging cable once the charging is complete.
• Overcharging could reduce the life of the battery
•  A charged batter)! will lose its capacity if it is not used on a regular ba5is.
  Important: To avoid a complete discharge of the battery, charge your speaker at least once every six months.

Bluetooth Pairing

1.  Press and hold the Power button for 2-3 seconds to turn your speaker on
2.  The Light Indicator will be flashing blue indicating it is in pairing mode.
3.  Go to the Bluetooth settings menu on your phone. make sure your Blueloolh i> on. Connect lo lh,a device listed as “TWS Speaker’”

Speaker Controls

1. Press and hold the Power button for 2-3 seconds to turn your speaker ON and OFF Press the Power button to play and pause music
2. Press the+> button to go to the next track Press and hold the button to increase the volume.
3. Press the<- button to go to the previous track. Press and hold the button to decrease the volume
4.  Press the Power button to answer a phone call. Press the Power button again to end the phone call. Note: Whe11 on a call, or your master speaker support5 microphone functionality.

True Wireless Pairing

1. Press, and hold the Power buttons on e.:ich speaker for 2-3 seconds to turn them ON. Write approximately 3 seconds a11d your two speakers will pair together. Restart both speakers if they aren·t pairing together after an extended period of time
2. Once your two speakers are paired together, the parent speaker’s indicator light will turn blue and flash. The child speaker·s indicator light will turn blue and shino steadily. Noto that buttons on both speakers should be functional, not just the master speaker
3.  Go to the Bluetooth settings menu on your phone. m;;,ke sure your Bluetooth is on. Co1111ect to the device listed as “TWS Speaker”
4.  Once your two speakers are both paired together and with your phone, the indicator light on both speakers will remain blue

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment
This device complies with Pc1rt 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference. and (2) this device must accept any interference received. including interference lh,.t may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to r.adio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does wuse harmful Interference to radio or television reception, which c;;,n be determined by turning the equipment off and on, the user is encour<1ged to try to correct the interference by one or more of the following measures;

•  Reorient or relocate the receiving antenna
•  Increase the separation between the equipment and receiver.
•  Connect the equipment i11to an outlet on a circuit different from that to which the receiver is connected.
•  Consult the dP.alP.r or an experience radio/TV technician for help

Vivitar One Year Warranty

This warranty covers the original consumer purchaser only and is not transmittable This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workers. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.
What Is Not Covered by Warranty
Dam,.ges ur malfunctions not resulting fro defects in maleri<1I or workmanship and damages or malfunctions from other th;:,n normal use, including but limited to, repair by unauthorized parties, tampering, modification or accident To Obtain WMranty Service and Troubleshooting information, Call 1-800-592-9S41 or visit our website at www.vivitar.com. To receive w service along with the name .ind address of an authorized product service center, the original consumer purchaser must contact us for problem determination < 1st service procedures. Pr□ot of purchase in the form of a bill of sale or receipted invoice, evidencing that the product is within the applicable warranty period(s). MUST be presented in order to obtain the requested service. It is your responsibility to properly package and send any defective products along with a dated copy of proof or purchase, a written explanation or the problem, and a valid return address to the authorized service center at your expense. Do not include any other items or accessories with the defective µroduct. Any products received by the authorized service center tl1at are, mt covered by warranty will be returned unrepaired.
©2022 Sakar International

Specifications

• Bluetooth Range: Up to 33 Feet (10 Meters)
• Charging Input: DC 5V
• Battery Type: 3.7V Lithium Ion Battery
• Charge Time: Approximately 2 Hours

The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Sakar International is under license. Other trademarks and trade names are those of their respective owners.

A Quick Look

Charging

1. Insert the included cable’s Micro USB plug into the charging port on the headphones.
   
2. Insert the standard USB plug into the USB port of a computer or suitable USB charging adapter.
   
3. The LED Indicator will turn red while the headphones are charging and turn blue when charging is complete.
   •  (red) = Charging
   •  (blue) = Charging Complete

Bluetooth Pairing

1. Press and hold the Power button for 3-4 seconds to turn the headphones On/Off.
   
2. The LED Indicator will turn blue and flash rapidly when the headphones are in pairing mode.
   • Pairing Mode
     Rapid Flashing Blue
     
3. . Go to the Bluetooth settings menu on your phone. Turn Bluetooth on and connect to “Wireless Headphone”.
   
4. The LED Indicator will stop flashing and remain blue when the headphones are paired with your phone.
   • Paired
     Blue
     

Using Your HEADPHONES

1. Press the Play button to play and pause a track.
   
2. Press the Vol. Increase/Next track button to go to the next song. Press and hold the button to increase the volume.
   
3. Press the Decrease Vol./Previous Track button to go back to the previous track. Press and hold to decrease the volume.
   
4. Press the Play/Pause Button to Answer an incoming call. Press the button again to end the call. Press and hold the button to decline an incoming call.
   

Important Safety Precautions

1. READ ALL INSTRUCTIONS BEFORE USING YOUR HEADPHONES.
2. Do not use your headphones near water. Do not place your headphones on any wet surfaces.
3. Do not allow children to use the headphones without adult supervision.
4. Do not expose your headphones to excessive heat, flames or fire.
5. Always press all buttons carefully.
6. Do not use in extremely dry environments, as this can lead to static discharge during usage.
7. Do not expose your headphones to temperatures above 104°/ 40°C. Keep out of direct sunlight.
8. Do not attempt to repair this product yourself. Contact a qualified service center if your headphones are in need of service.
9. Do not drop, puncture or expose your headphones to excessive trauma.
10. Your headphones are not intended for commercial use.
11. Use only the supplied charging cable. Unplug this device when not in use for long periods of time.
12. Use a soft cloth to clean your headphones. Never use any harsh chemicals or detergents.
13. Please recycle or dispose of your headphones properly based on the laws and rules of your municipality. Contact local recycling facilities and/or the manufacturer of your headphones for further information.

Other Controls

Press the mode button to change the headphones mode to Bluetooth or FM Radio.

In FM mode, press the volume buttons to change channels. Press and hold the buttons to adjust the headphone’s volume.

Insert an auxiliary cable (not included) directly to the aux port on your headphones to go directly to AUX mode, where you can listen to music from an attached audio device.

Vivitar One Year Warranty

This warranty covers the original consumer purchaser only and is not transferable.

This warranty covers products that fail to function properly UNDER NORMAL USAGE, due to defects in material or workmanship. Your product will be repaired or replaced at no charge for parts or labor for a period of one year.

What Is Not Covered by Warranty
Damages or malfunctions not resulting from defects in material or workmanship and damages or malfunctions from other than normal use, including but limited to, repair by unauthorized parties, tampering, modification or accident.

To Obtain Warranty Service and Troubleshooting Information:
Call 1-800-592-9541 or visit our website at www.vivitar.com.

To receive Warranty service along with the name and address of an authorized product service center, the original consumer purchaser must contact us for problem determination and service procedures. Proof of purchase in the form of a bill of sale or receipted invoice, evidencing that the product is within the applicable Warranty period(s), MUST be presented in order to obtain the requested service. It is your responsibility to properly package and send any defective products along with a dated copy of proof of purchase, a written explanation of the problem, and a valid return address to the authorized service center at your expense. Do not include any other items or accessories with the defective product. Any products received by the authorized service center that are not covered by warranty will be returned unpaired.

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Customer Support

©2021 Sakar International
195 Carter Drive
Edison, NJ 08817
Support: 800 592 9541
www.vivitar.com