INTELLIGENT SOLAR LED
CANDLELIGHT WITH BLUETOOTH® SPEAKER
Instruction Manual
Model: SR83SP01H-08
WESTINGHOUSE, are trademarks of Westinghouse Electric Corporation. Used
under license by Sky Rich Star Limited. All Rights Reserved.
For assistance with assembly or instruction, parts, and customer service, call:
The U.S.A. & Canada only: 1-844-551-0680
8 am – 5 pm Monday – Friday, Central Standard Time Or email: [email protected]
www.westinghousesolarlights.com
WARNING: Do not dispose of lithium batteries in municipal waste stream or by fire as batteries may explode. Do not open, short circuit, destroy batteries. Dispose of batteries in accordance with Local, State, and Federal regulations. Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium, nickel-metal hydride, or lithium-ion) batteries.
PARTS AND SPECIFICATIONS
A) Solar Panel
B) Lens
C) LED Button
D) LED Charge/Bluetooth indicator®
E) Power Button
F) Charging Port
G) Bluetooth Speaker
H) Micro USB Cable®
CHARGING INSTRUCTIONS
CHARGING METHOD:
- USB charging port (F) Connect the external 5V power supply to charge the product. It takes 2.5 hours to fully charge.
- The solar photovoltaic panel can provide a 5V110mA charging current when placed in direct sunlight for charging. It takes 20 hours to fully charge.
OPERATING INSTRUCTIONS
- Press the Power button (E) and hold for 2 seconds to turn the speaker ON and enter the Bluetooth pairing mode. The blue indicator light flashes, and the smartphone/tablet searches for “Westinghouse SR83” to connect. When paired, the blue indicator light will
remain on. - When you double-click the power button (E), the current connected smartphone/tablet will be disconnected and re-enter into the pairing mode. (Blinking (D)) 3) Short press the power button (E) to pause the music playing
NOTE: If you turn on the smartphone/tablet, and is not connected or have no signal, the speaker will automatically shut down after 15 minutes.
NOTE: LOW BATTERY TIPS.
When the light experiences a low battery charge, it will voice a warning “low battery, please charge”. Immediately charge with USB plug provided, or place light outside in direct sunlight. If the product is not charged in enough time, the product will shut off.
HOW TO OPERATE LED BUTTON (C):
Press the LED button to turn on/off the candlelight.
NOTE: Bluetooth speaker and LED light work independently of each other.
RUN TIME
| Speaker | 6.5 HOURS |
| Candle Light | 48 HOURS |
| Speaker & Candle Light | 6.5 HOURS |
NOTE: For volume control, use your smartphone/tablet.
MULTI-COLOR LED INDICATOR (E) INSTRUCTIONS:
1) RED LIGHT indicates solar LED light is charging. USB plug or solar charging, the red light will remain on until solar LED light is fully charged and turn off.
2) BLUE LIGHT indicates Bluetooth status. Turn on the Bluetooth speaker and enter into the Bluetooth pairing mode, the blue light flashes. After the smartphone/tablet is connected with the speaker, the blue light will stop flashing and remain on.
WARNING:
1. This product is not a toy and contains small parts. Close supervision is necessary when
this unit is used near children.
2. To reduce the risk of electrical shock, do not put the unit in water or other liquid. For cleaning, use a soft dry cloth. Do not place or store appliances where it can fall or be pulled into a tub or sink.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B Digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the distance between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that may cause undesired operation.
WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RF EXPOSURE: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
TRADEMARK ATTRIBUTION FOOTNOTE
Whenever the Bluetooth Trademarks are used in a particular piece, they must be attributed with an appropriate trademark footnote. The commended attribution footnote is as follows: the Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, inc. And any use of such marks by INTERNATIONAL DEVELOPMENT COMPANY is under license. Other trademarks and trade names are those of their respective owners.
NOTE: The Bluetooth brand elements may not be used in a fashion or manner that could impair or otherwise damage the goodwill associated with the Bluetooth brand or the Fellow Adopters (International Development Company). The Bluetooth brand elements shall
therefore not be used in connection with products and services that do not enable any Bluetooth wireless functionality or in connection with unlawful, obscene, pornographic, excessively violent, hazardous, or otherwise poor-taste activities.
