WHIRLPOOL Top Loading Washing Machine Manual

WHIRLPOOL Top Loading Washing Machine

OPERATING INSTRUCTIONS

Fire Hazard Never place items in the washer that are dampened with gasoline or other flammable fluids. No washer can completely remove oil. Do not dry anything that has ever had any type of oil on it (including cooking oils). Doing so can result in death, explosion, or fire.

WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS, located in your appliance’s Owner’s Manual, before operating this appliance.

STEP 1. ADD HE DETERGENT

Designed to use only HE (High Efficiency)detergents.

NOTE: See ADDING LAUNDRY PRODUCTS (below) for more information on adding HE detergent, fabric softener, and/or bleach.

STEP 2. LOAD CLOTHES

For best results, load garments in loose heaps evenly around the basket wall.

STEP 3. PRESS POWER TO TURN ON THE

STEP 4. SELECT THE DESIRED CYCLE FOR YOUR LOAD

STEP 5. ADJUST CYCLE SETTINGS, IF DESIRED

STEP 6. SELECT ADDITIONAL OPTIONS*

STEP 7. PRESS AND HOLD START/PAUSE TO BEGIN CYCLE

NOTE: Start button must be held for 1 second to start cycle. Once the status lights are illuminated, release the start button.

*Not all cycles, settings or options are available with all models.

ADDING LAUNDRY PRODUCTS

IMPORTANT: Using non-HE detergent will likely result in longer cycle times and reduced rinsing performance. It may also result in component malfunction and, over time, buildup of mold or mildew. HE detergents should be low-sudsing and quick-dispersing to produce the right amount of suds for the best performance.

ADDING HE DETERGENT TO BASKET

Add a measured amount of HE detergent or single-dose laundry packets into the basket. If using oxi-type boosters, color-safe bleach, or fabric softener crystals, add to the bottom of the washer basket before adding clothes.
NOTE: Follow the manufacturer’s instructions to determine the amount of laundry products to use.

ADDING LIQUID CHLORINE BLEACH

Do not overfill, dilute, or use more than 1 cup (236 mL). Do not use color-safe bleach or oxi products in the same cycle with liquid chlorine bleach.

ADDING LIQUID FABRIC SOFTENER

If you desire to use liquid fabric softener with this washer, Whirlpool suggests using the Downy Ball® dispenser. Pour a measured amount of liquid fabric softener into the Downy Ball® dispenser, pull the ring tightly to seal it, and place on top of load. Follow manufacturer’s directions for correct amount of fabric softener based on your load size. Then use the Rinse Options button to select Fabric Softener. The Downy Ball® dispenser will automatically release the fabric softener at the correct time in the cycle. For questions on using the Downy Ball® dispenser visit www.downy.com.

ADDING LIQUID FABRIC SOFTENER MANUALLY

Select the Fabric Softener option on the control panel before starting a cycle. During the final rinse, wait until the washer has completed filling, press the Start/Pause button to pause the washer. Lift the lid and add the recommended amount of liquid fabric softener. Close the lid, press and hold the Start/Pause button to resume the cycle.

CONTROL PANEL AND FEATURES

*Appearance may vary depending on model.

POWER
Press to turn on/off or to stop/cancel a cycle.
CYCLE KNOB
Turn knob to select desired cycle.
START/PAUSE Press and hold the Start/Pause button for 1 second until all status lights are illuminated, then release to start cycle. Press during a cycle to pause cycle and unlock lid.
NOTE: If machine is spinning it may take longer to unlock lid.
CYCLE MODIFIERS (Not all modifiers are available on all cycles)
TEMP Press to modify the cycle’s available temperatures (Tap Cold, Cold, Cool, Warm, or Hot).
NOTE: Pressing Temp will toggle through available temperature options. When no lights in the temperature column are illuminated the selected temperature is Tap Cold.
RINSE OPTIONS Press to modify the cycle’s available rinse options. Press once for Fabric Softener, twice for Extra Rinse and three times to activate both.
FABRIC SOFTENER Select this option to let the machine know when you have added liquid fabric softener.
EXTRA RINSE Select this option to add a second rinse.

OPTIONS

Press to add or remove options for each cycle. Press once to add a 30 min PreSoak, twice to activate Deep Water and three times for both.

DEEP WATER

Use this option to automatically add more water to your wash cycle. You can also use this option to reduce the likelihood of white residue on dark clothing.
30 MIN PRESOAK Touch to add a 30 minute presoak period to help loosen tough stains. The washer will fill, pause to soak, and then begin the selected cycle.

FAUCET

Press to access an instant water stream. Use this feature to pretreat clothes and other items right in the washer. You can also use this feature to manually add water to the machine as desired.
NOTE: The washer will drain at the beginning of the cycle if a large volume of water is detected to ensure the machine can correctly sense the load size.
NOTE: If the washer detects an out-of-balance condition it may pause and attempt and re-distribute the load. During this time the Sense and Wash status indicators will both briefly illuminate.
WARNING: Do not wash water-resistant or water repellant-type clothing. Failure to closely follow these instructions may result in an abnormal vibrating and out-of-balance condition that could result in physical injury, property damage, and/or appliance damage.

2-IN-1 REMOVABLE AGITATOR

Keep it in (Agitator mode) when you want increased mechanical action to remove and rinse away loose soils. You can use this mode anytime but it’s especially suited for everyday mixed loads.
Take it out (Impeller mode) when you need added space and/or a thorough, gentle clean. You can use this mode anytime but it’s especially suited for bulky items such as bedding and delicate items such as undergarments.

USING THE REMOVABLE AGITATOR

Squeeze handle, rotate counter-clockwise, and pull up to remove.
Push down and rotate clockwise to re-install. The agitator should lock into place.

For detailed installation instruction and maintenance information, winter storage, and transportation tips, please see the Owner’s Manual included with your machine.

CHOOSING THE RIGHT CYCLE

A cycle guide for your washer can be found online at www.whirlpool.com. The document will help identify which cycle to choose for various load types as well as the default cycle options. For example we recommend using the NORMAL cycle with Warm water for cottons, linens and mixed-garment loads.

PRE-TREATING BEFORE A WASH CYCLE

Press the Faucet button once to turn on and press again to turn off.
Faucet will automatically shut off after 10 minutes or when max water level is reached.
Water will automatically drain if water level becomes too high. Water will also drain after 10 minutes if the lid is left open or 3 hours if the lid is left closed.

MORE WATER WHEN YOU WANT IT

AUTO SENSING AND DEEP WATER

The washer will adjust the water level to the optimal amount for a High Efficiency wash of the detected load size.
Press Deep Water to automatically add more water to your wash cycle.
It is recommended to use BULKY ITEMS cycle with Deep Water option for loads where maximum water level is desired.
Expect longer cycle times due to extended fill duration when using the Deep Water option.

CLEANING WITH LESS WATER

The washer has been designed and optimized to provide a thorough cleaning using less water to conserve energy and resources. As the washer dampens and moves the load, the level of the items will settle in the basket. This is normal, and does not indicate that more items should be added.
IMPORTANT: You will not see a full basket of water as with older, less efficient washing machines. It is normal for some of the load to be above the water line.

ASSISTANCE OR SERVICE AND ADDITIONAL INFORMATION

FAQ’S

Does Whirlpool make good top load washers?

Our favorite is the Whirlpool WTW8127LW 5.3 cu. ft. 2-in-1 Top Load Washing Machine because it has both an agitator and impeller plate, an extra-large capacity, and a host of convenient features. Find the best top load washers for every type of budget, household, and laundry room below

What are the most common problems on a Whirlpool washing machine?

Here are seven of the most common problems on a Whirlpool washing machine and potential fixes for them.
Washer Making Unusual Noises.
Washer Won’t Start. …
Washer Lid Won’t Lock. …
LD Error Code Appears. …
Washer Leaves Deposits on Dark Clothes. …
Washer Has a Burned Plastic Odor. …
Rust Spots Appear on Washer Lid.

Do Whirlpool washers have a reset button?

Follow these steps to reset a Whirlpool washing machine: Make sure the power to the washer is turned on at the wall, but keep the Power button on the control off. Hold the Program button down while simultaneously pressing the Water Level button two times. When done correctly, the control panel lights should illuminate.

Why is my Whirlpool washer not cleaning clothes?

Have you run a Clean Washer Cycle? If you feel that the clothes are not coming clean or that the washer level is lower than when you first started using this washer, try running a Clean Washer cycle. This cycle re-calibrates the control, and resets it back to the factory-set water levels.

Where do you put the detergent in a Whirlpool top load washer?

For a top load washing machine without a dispenser, put your detergents directly into the drum of your washer. Always ensure that you measure and pour the right amount of detergent as doing that will always give you a clean wash.

How do you put liquid detergent in a top loading washing machine?

If you have a regular top-loading machine, it’s best to fill your washer with water first, then add your detergent, then add your clothes. This helps evenly distribute the detergent in the water before it hits your clothes. Remember that the nicer you are to your washer and dryer the longer they’ll last.

Why is my Whirlpool washer loud when spinning?

A Whirlpool washing machine making loud banging noise on the spin cycle is nerve-racking. The clutch engages the transmission with the tub during the spin cycle, which allows the tub to spin fast. Excessive overloading causes the clutch to wear out over time and consequently, the tub spins slower and more noisily.

Why does my washer sound like an airplane taking off?

This is due to the fact that most washing machines have concrete blocks placed inside. Their role is to weight down the drum, otherwise, the machine part will try to fly through the lid of the appliance during every spin cycle

How do I know if my washing machine agitator is broken?

The agitator should start to oscillate back and forth, mixing up the clothes in the water. If the agitator does not move, double check that the sensor is depressed. If it still does not move with the sensor depressed, the agitator is broken and should be repaired.

What is better Maytag or Whirlpool?

Both brands will deliver a durable product and a quality clean. Maytag washing machines provide a greater value and display of features compared to Whirlpool, whereas with Whirlpool, you will find a greater selection of top-load and front-load products with a wider range of price points

Which is better washer with agitator or not?

Washing machines with an impeller tend to wash your clothes better than with an agitator. That means that, generally speaking, front load washers or top load washers without an agitator will do a better job at getting rid of tough stains and dirt off your clothes.

How do I stop my washing machine from shaking when spinning?

6 Tips to Stop Washing Machine Vibration
Check that your loads are balanced. …
Check the the floor and machine are level. …
Ensure You Have a Sturdy Floor. …
Check Your Stacking Kit. …
Purchase Washing Machine Vibration Pads. …
Call in Some Reinforcement.

VIDEO

WHIRLPOOL Top Loading Washing Machine
www://whirlpool.com/