Xiaomi Redmi AirDots Earbuds User Manual

Xiaomi Redmi AirDots TWS Earbuds

Charging

Remove product from packaging and all the protective tape and stickers
Place earphones back in the charging case and plug in USB to allow to charge for an hour or so. It should light red when charging on the box and earphones. Red also means that it is disconnected from bluetooth.
If there is a white light when taken out of the box, it means it is connected to the Bluetooth of the mobile phone. When there is a white light when in the charging box for a minute and then goes out, it means the earphones are fully charged.

Set up and Pairing

Once charged, remove the earphones from the charging box and it will turn on.
Turn on Bluetooth and search for “Redmi AirDots_R” or “Redmi AirDots_L” depending on which earphone taken out to pair the device. If it does not appear, please refresh the Bluetooth device list and search again. The other ear piece should connect automatically.
To pair only one of the earphones (singular), take out the earphone and the white light will flash quickly for about 4 – 5 seconds, once the white light starts to flash slow, check the Bluetooth device list on your smartphone and pair it. Works for either side of the earphones.

Turning on/off the earphones:

To turn earphone on press the multi-function key (about 1 – 2 seconds).
To turn off the earphone, either put it back in the charging box or press the multi-function key for about 5 seconds until the white light turns red and then off.

Operation:

1. Call function (answer, hang up or reject call)

Incoming calls: Press the multifunction key (end of earbud) to answer the phone
Press multi-function key again to hang up
Reject the call by pressing and holding the multi-function key for a few seconds

2. Music or video

To pause or play the music/video while it is running, press the multi-function key

3. Voice assistant

To turn on the voice assistant, double click the multi-function key
Supports Xiaomi voice control, Siri and Google assistant
Phone needs to support voice control to enable this setting

Airdots Headset reset:

Reset is generally used if the product cannot connect successfully.
Press the multi-function key on both Left and right earphones for 15 seconds until the red and white flashes alternately for 3 times then turns off
Remove or unpair the Xiaomi Redmi Airdots on your smartphone’s Bluetooth device list and delete the connection record then refresh.
Reset successful and ready to start the pairing process again

FAQ’S

What is the difference between red and blue light?

Red means it is disconnected from Bluetooth, blue means it is connected to Bluetooth.

How do I know when the earphones are fully charged?

When there is a white light when in the charging box for a minute and then goes out, it means the earphones are fully charged.

Why does the earphone turn off automatically?

If there is no sound or music playing for 5 minutes, it will turn off automatically. To turn on again, press and hold the multi-function key for 5 seconds.

Why does the earphone not connect to my phone?

Please make sure your mobile phone has Bluetooth enabled and you have searched for “Redmi AirDots_R” or “Redmi AirDots_L” depending on which earphone taken out to pair the device. If it does not appear, please refresh the Bluetooth device list and search again. The other ear piece should connect automatically. If you still cannot connect, please restart your mobile phone first and try again. If you still cannot connect, please restart your mobile phone first and try again.

Are Redmi AirDots and redmi earbuds same?

So you’ll find Xiaomi naming the same product different names in various markets. So Redmi AirDots are also sometime called Mi AirDots or Mi True Wireless Earbuds. Redmi is a Xiaomi sub-brand launched sometime in 2013 with entry-level and mid-range smartphones.

Does redmi AirDots have wireless charging?

The Mi AirDots have true wireless stereo (TWS) technology that splits audio in both earbuds to deliver a truly wireless experience. With no wires for a tangle-free experience, the set comes with a charging box for storage and wireless charging, delivering extreme simplicity and convenience.

Are redmi earbuds safe?

The earbuds are rated IPX4 for water resistance, so they’re protected against occasional splashes and sweat, but the case itself isn’t water-resistant. As far as the design is concerned, I don’t have any major complaints with the Redmi Earbuds.

Is redmi AirDots waterproof?

Xiaomi Redmi AirDots specs:
IPX4 waterproof rating (sweat and light rain resistant) 6 – 7 hours listening on a full charge.

How do I know when my Airdots is charged?

Like so connecting this up the indicator light comes on right here to show that it’s charging. Inside we don’t have any indicator lights just on the airpods. Themselves.

How do I know if my redmi AirDots battery is low?

To check the battery of the charging case, open the lid of charging case, or press the function button if the lid is closed. Once this is done, if the indicator light of the charging case stays lit for 5 seconds, it means the battery is suﬃcient.

How do I turn off redmi earbuds?

Once you remove the earbud from the charging case, it automatically turns on. While the earbud is off, press and hold the touch panel for 1 second till the indicator turns white. Once you place the earbud into the charging case, it automatically turns off.

How do you answer a call on redmi Airdots?

Answer/ hang up /reject the phone call
When come an incoming call, tap the multi-function key to answer the phone. While on a phone call, press the multi-function button to hang up the phone. When come an incoming call, long press the multi-function key to reject the phone.

Xiaomi Redmi AirDots TWS Earbuds
www://xiaomistore.pk/redmi-airdots-tws-bluetooth-earbuds.html