REMINGTON Vac Trim Beard Trimmer MB6850AU Manual

REMINGTON Vac Trim Beard Trimmer User Manual

remington.co.nz

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic precautions should always be observed, including the following.

READ ALL INSTRUCTIONS BEFORE USING
For additional protection, the installation of a residual current device (rid) having a rated residual operating current not exceeding 30 mA is advisable in the electrical circuit supplying the bathroom. Ask your installer for advice.

KEEP THE POWER ADAPTOR AWAY FROM WATER
WARNING – TO REDUCE THE RISK OF BURNS, ELECTROCUTION AND FIRE OR INJURY TO PERSONS

DANGER – As with most electrical appliances, electrical parts are electrically live even when the switch is off.

Do not place or store the appliance or charging adaptor where it can fall or be knocked into a sink or bath.
Do not place in or drop into water or any other liquid.
If an appliance falls into water, “unplug it” immediately. Do not reach into the water.
Unplug the charging adaptor from the electrical outlet immediately after fully charging.
Do not use while bathing or in the shower.
Unplug and switch off this appliance before cleaning it.
Use this appliance only for its intended use as described in this manual.
Do not use attachments not recommended by Remington.
Never drop or insert any object into any opening of this appliance.
Keep the cord away from heated surfaces.
Do not use this appliance with a damaged or broken trimming unit as injury may occur.
Always store the charging adaptor in a moisture-free location.
For household use only.
This appliance should not be used by children or other persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
This appliance is not a toy. Children shall be supervised to ensure they do not play with the appliance. Cleaning and use maintenance shall not be made by children without supervision.
Keep the appliance and the power cord away from edge of tables or countertops and out of reach of children and persons with reduced physical, sensory or mental capabilities.
Do not use on people who are asleep.
Never operate this appliance if it has a damaged cord or plug, if it is not working correctly, if the charging adaptor has been damaged or dropped into water.
Do not use an extension cord or a voltage converter with this appliance.
Do not wrap the cord around the appliance.
This appliance should be supplied with approved safety isolating adaptor SW-050150AU or PA-0515A (AUS version) with the output capacity of 5Vd.c, 1.5A (adaptor output).

WARNING – KEEP THE APPLIANCE DRY
Remington strongly recommends that an approved Safety Switch
(residual current device) be installed to protect all bathroom power
outlets. Ask an electrical contractor for advice.
SAVE THESE INSTRUCTIONS

MB6850AU VAC TRIM BEARD TRIMMER USE AND CARE MANUAL

Thank you for purchasing your Remington® Vic Trim Beard Trimmer. Inside this manual you will find instructions on using and caring for your trimmer.

KEY PARTS

On/Off Button
32mm Blade
Vacuum Intake
Vacuum Chamber
Vacuum Chamber Release Buttons
Charging Indicator Light
Detail Trimmer Head
Adjustable Beard Comb (2-18mm)
Comb Lock Button

Also includes: – Charging Adaptor

MB6850AU SPECIFICATIONS

CHARGING

Before using your trimmer for the first time, charge it for 24 hours. Note during this charge ignore the electronic indicators as they are in “start-up cycle”.
Plug the adaptor into your trimmer and then plug the charging adaptor unit into a 100-240 volt domestic power outlet. Check to ensure that the trimmer On/Off switch is OFF. The Charging Indicator Light will glow to indicate that it is charging. The light will turn off after charging is complete.
The batteries cannot be overcharged, but it is recommended that charging be discontinued and the trimmer stored away if it will not be used for an extended period of time (2-3 months).
The trimmer will be fully charged in 2 hours.
To preserve the life of the batteries, discharge them by running the trimmer until the blades move slowly. Switch off and recharge for 24 hours. Do this every 6 months.
Use the trimmer only with the charging adaptor supplied.

NOTE: This product is for cordless use only, it cannot be used while it is connected to the mains power outlet or while it is charging.

TRIMMER ATTACHMENTS

CHANGING THE MAIN AND DETAIL BLADES

Your trimmer is supplied with the main blade already fitted. It is easier to remove and refit the main blade with the vacuum chamber removed.

Switch your trimmer off.
Hold the trimmer in one hand.
Push the top of the blade away from the trimmer body using your thumb. (Fig A)
Use enough force to free the blade from the trimmer body. Once free, lift it off.
Fit the desired blade by engaging the tab on the back of the blade into the rear of your trimmer. Press the front of the blade down until it clicks.
Replace the vacuum chamber.

FITTING/REMOVING THE ADJUSTABLE BEARD COMB

Switch your trimmer off.
Depress the comb lock button then slide the adjustable comb into the guides on the rear of your trimmer. Slide the comb all the way down then release the button.
To adjust the length of the beard comb, depress the comb lock button then slide the comb to the desired length.
The Adjustable Beard Comb attachment has 8 Length settings: 2-16mm (in increments of 2mm). Begin with a higher numbered setting. Adjust cutting length as desired once you are familiar with using the trimmer, it is better to select a longer hair length setting in order not to trim too much hair.

TIPS FOR BEST RESULTS

Beard, moustache and sideburn hairs should be dry.
Avoid using lotions before using your trimmer.
Remove the Adjustable Beard Comb attachment if you are: defining hairline edges such as sideburns, trimming the nape of your neck, trimming your beard line on front of neck.
Before trimming beards, comb your hair in the direction that it grows so that the hairs are at their maximum height and facing in the same direction.
Since all hairs do not grow in the same direction, you may want to try different trimming methods (i.e. upwards, downwards or across). Practice is best for optimum results.

NOTE: Use slow light pressure. Too much pressure may trim off more hair than desired.

CARING FOR YOUR TRIMMER

Your beard trimmer is fitted with high quality blades. To ensure long lasting performance, clean the blades and trimmer regularly.

AFTER EACH USE

Ensure your trimmer is switched off and disconnected from the charger before cleaning.
Remove the blade. Brush the accumulated hair from the blade.
Wipe your trimmer body with a damp cloth and dry immediately. Do not submerge your trimmer in water.
Refit the blade.
Press the two vacuum chamber release buttons and remove the vacuum chamber (Fig B).
Empty the vacuum chamber (Fig C) and rinse it under a running tap. The chamber must be completely dry before returning it to the trimmer.

WASHABLE HEADS

The trimming heads are washable for ease of cleaning. Always remove the trimming head from your trimmer before washing.
Rinse the trimming heads under a running tap to remove any hair clippings (Fig D).
Once dry, refit the trimming head.

NOTE: If you rinse these attachments with cool or warm water (never use hot water) then they will need to be lubricated with light-grade oil or sewing machine oil (1-2 drops over the cutters).
NEVER run the entire Vic Groom unit under the tap.

ENVIRONMENTAL PROTECTION

To avoid environmental and health problems due to hazardous substances in electrical and electronic goods, appliances marked with this symbol must not be disposed of with unsorted municipal waste, but recovered, reused or recycled.

BATTERY REMOVAL

NOTE: The battery is not intended to be removed or replaced under normal use. The only time the battery should be removed or the unit opened or disassembled, is at the end of the product’s useful life before it is discarded.

The MB6850AU contains a lithium-ion battery. Once the groomer has reached the end of its life, to ensure proper disposal of the product, please take the appliance to a recycling center, where the internal rechargeable battery should be removed by a professional and recycled separately.

For more information about recycling of electrical and battery operated appliances, please contact your local council office or your household waste disposal service.

CAUTION! Do not put in the fire or mutilate your batteries when disposing as they may burst and release toxic materials. Do not short circuit as it may cause burns.

THIS PRODUCT IS NOT SUITABLE FOR USE IN THE BATH OR SHOWER
This appliance conforms to radio frequency interference requirements. Any product purchased and used commercially carries a limited 90 Day Warranty.

Spectrum Brands Australia Pty Ltd and Spectrum Brands New Zealand Limited
WARRANTY AGAINST DEFECTS

In this warranty:
Australian Consumer Law means the Australian consumer law set out in Schedule 2 to the Competition and Consumer Act 2010;

CGA means the New Zealand Consumer Guarantees Act 1993;

Goods means the product or equipment which was accompanied by this warranty and purchased in Australia or New Zealand, as the case may be;

Manufacturer, We or us means:

for Goods purchased in Australia, Spectrum Brands Australia Pty Ltd ACN, 007 070 573; or
for Goods purchased in New Zealand, Spectrum Brands New Zealand Limited, as the case may be, contact details as set out at the end of this warranty;

Supplier means the authorized distributor or retailer of the Goods that sold you the Goods
in Australia or in New Zealand; and
You means you, the original end-user purchaser of the Goods.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law, or the CGA. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
The benefits provided by this Warranty are in addition to all other rights and remedies in respect of the Goods which the consumer has under either the Australian Consumer Law or the CGA. The original purchaser of the Goods is provided with the following Warranty subject to the Warranty Conditions:
We warrant the Goods for all parts defective in workmanship or materials for the period of two (2) years from the date of purchase (Warranty Period). If the Goods prove defective within the Warranty Period by reason of improper workmanship or material, we may, at our own discretion, repair or replace the Goods without charge.
• Warranty Conditions
The Goods must be used in accordance with the manufacturer’s instructions. This Warranty does not apply should the defect in or failure of the Goods be attributable to misuse, abuse, accident or non-observance of manufacturer’s instructions on the part of the user. As far as the law permits, the manufacturer does not accept liability for any direct or consequential loss, damage or other expense caused by or arising out of any failure to use the Goods in accordance with the manufacturer’s instructions.
Exhaustible components (such as shaver heads, cutters and foils) of the Goods are included under this Warranty only where there is a defect in workmanship or materials used.
The warranty granted under clause 3 is limited to repair or replacement only.
Any parts of the Goods replaced during repairs or any product replaced remain the property of the manufacturer. In the event of the Goods being replaced during the Warranty Period, the warranty on the replacement Goods will expire on the same date as for the Warranty Period on the original Goods which are replaced.
In order to claim under the warranty granted under clause 3 you must: (a) Retain this warranty with your receipt/proof of purchase; and (b) Return the Goods to us at the relevant address below or to the Supplier by prepaid freight within the Warranty Period accompanied with (i) the legible and unmodified original proof of purchase, which clearly indicates the name and address of the Supplier, the date and place of purchase, the product name or other product serial number and (ii) this warranty.
This warranty is immediately void if: (a) Any serial number or appliance plate is removed or defaced; (b) The Goods have been serviced or otherwise repaired by a person not authorized to do so by us or where non approved replaced parts are used.
The Goods are designed for domestic use only. A limited 90-day Warranty applies to any industrial or commercial use of the Goods. The Goods must be connected to the electrical voltage requirements as specified in the ratings label located on the Goods.
This warranty does not cover the cost of claiming under the warranty or transport of the Goods to and from the Supplier or us.
This warranty is only valid and enforceable in Australia against Spectrum Brands Australia Pty Ltd and in New Zealand against Spectrum Brands New Zealand Limited.

Spectrum Brands Australia Pty
Ltd Locked Bag 3004
Braeside, VIC 3195
AUSTRALIA
Customer service in Australia: 1800 623 118
E-mail: [email protected]
Website: www.remington-products.com.au

Spectrum Brands New Zealand Limited
PO Box 9817
Newmarket, Auckland 1149
NEW ZEALAND
Customer service in New Zealand: 0800 736 776
E-mail: [email protected]
Website: www.remington.co.nz

REMINGTON SERVICE HOTLINE
Australia 1800 623 118 (toll free)
New Zealand 0800 736 776 (toll free)

® Registered Trademark of Spectrum Brands, Inc., or one of its subsidiaries.
Made in China to the specifications of Spectrum Brands, Inc.
© 2018 Spectrum Brands, Inc.
REV. 04/18 PART NO. T22-7000153
TYPE: MB6850